Stamp set - Designline - Carolas Adventskalenderzahlen

The bundle will be available as a ‘Wednesday Special’ on 16 September 2026 from 7.00 pm to 11.45 pm at a special price of €62; after that, it will cost €80. The offer is valid whilst stocks last. !!!Pre-order!!! We expect the dies to arrive at the end of October 2026 The “Bundle – 3D Numbers Zero to Nine” consists of 9 die-cut sets.With the “3D Numbers Zero to Nine” bundle, you’ll receive all the numbers from 0 to 9 and can create your own three-dimensional number combinations. Whether it’s a birthday, anniversary, year or a very special milestone – the individual numbers can be combined in countless ways and, thanks to their three-dimensional shape, make a real eye-catcher. Using different papers and colours, you can redesign them time and time again to suit any occasion. 💡 Tip: Combine several 3D numbers to create birthday numbers such as 18, 30 or 50, design years or personal lucky numbers. The numbers look particularly lovely when made from patterned paper, metallic cardstock or adorned with small floral and festive decorative elements. Or place the numbers on a backing of acetate film or tracing paper and fill them with shaker elements for a cool effect.  The finished 3D numbers are approx. 5.7 cm high and approx. 1.5 cm deep The dies are compatible with standard die-cutting and embossing machines (DieCut systems).You can use them for card, felt, fabric and shrink film.Material: 100% steelWe’ve compiled lots of ideas for this bundle on our Pinterest board and in our creative collection. Do have a look and get inspired.Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D One’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D ‘One’, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies come in the following sizesOne full-surface die (approx. 2.6 x 5.7 cm each) One frame (approx. 2.6 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 18.2 x 2.1 cm) The finished 3D number measures approx. 2.6 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve gathered lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the die-cuts to arrive at the end of October 2026With the ‘3D Four’ die, you can create a three-dimensional number that turns your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D four, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Four full-surface dies (approx. 4.0 x 5.7 cm each) Four frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 20.0 x 2.1 cm) Inner border (approx. 2.6 x 2.1 cm)The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100 % steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It is extremely versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an extra layer of backing or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not take a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026 With the ‘3D Seven’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D seven, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Seven solid-colour numbers (approx. 4.0 x 5.7 cm each) Seven frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 12.9 x 2.1 cm & 10.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the die-cuts to arrive at the end of October 2026With the ‘3D Zero’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D zero, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizesZero – full-surface (approx. 4.0 x 5.7 cm)Zero with frame (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm)Outer border (approx. 17.7 x 2.1 cm)Inner border (approx. 8.0 x 2.1 cm)The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Eight’ die, you can create a three-dimensional number that turns your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D eight, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Eight solid-filled (approx. 4.0 x 5.7 cm) Eight framed (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 18.4 x 2.1 cm)Inner border (approx. 3.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Six & Nine’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D six or nine, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are the following sizes:Six/Nine full-surface (approx. 4.0 x 5.7 cm each) Six/Nine framed (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 13.5 x 2.1 cm & 10.0 x 2.1 cm) Inner border (approx. 3.9 x 2.1 cm)The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Five’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D five, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place transparent paper or acetate film behind the numbers and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Five full-size (approx. 4.0 x 5.7 cm each) Five frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 16.4 x 2.1 cm & 14.3 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Two’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D ‘2’, offering you brilliant design options for birthdays, anniversaries, year dates or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Two full-size (approx. 4.0 x 5.7 cm each) Two frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 16.4 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve gathered lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Three’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D three, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place transparent paper or acetate film behind the numbers and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Three full-size (approx. 4.0 x 5.7 cm) Three frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 14.0 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and be inspired! 📅 Published on: 16 September 2026

Letters & numbers with a modern striped look With the ‘Alphabet Stripes’ stamp set, you can create custom lettering, names, numbers and personal messages with a truly unique look. The slim letters and numbers, with their striking striped design, look modern, light and unusual – perfect for creative projects where the typography itself becomes the centre of attention. From a quick ‘Hi’ to names and birthday numbers right through to personalised headings: with this alphabet, you have complete creative freedom. Perfect for : Names & initials Birthday and year numbers Personalised greeting cards Gift wrapping & tags Scrapbooking & journaling Headings and short statements Advent calendars & numbering 👉 Tip : Have fun stamping with different colours or stamp individual letters slightly offset. The delicate striped pattern also looks particularly striking in tone-on-tone colours or classic black. Combined with floral or graphic motifs, it creates modern designs that put your very own personal message centre stage. An alphabet for endless ideas – modern, personalised and, with its distinctive striped look, perfect for personalised lettering, names and numbers. The individual stamps have the following dimensions: Letters: height (approx. 2.6 cm) Numbers: height (approx. 2.6 cm) The illustrations for this set are by Carola from Carolas Bastelstübchen. ✅ Product details : • Photopolymer stamp set on an A6 sheet • Precise lines & clear stamping quality • Versatile for use on cards, gift wrapping, planners and more • Combines perfectly with other sets from our collection For particularly beautiful results, we recommend using the VersaFine Clair ink pads. To get started straight away, please remember: you’ll need a suitable acrylic block – this is not included. 💡 Looking for inspiration? Feel free to check out our [Design Team] or browse through our [Creative Collection] and [Pinterest board] – you’ll find lots of great examples and ideas featuring this stamp set. 💕 📅 Published on : 11 September 2026

🔢 ‘Large Numbers with Delicate Frames’ die – numbers with a special impact With the ‘Large Numbers with Delicate Frames’ die, you can create striking displays for birthdays, anniversaries, years and special milestones. The large numbers with their delicate frames create a modern and elegant look, making every number an eye-catcher in your creative projects. Whether it’s a birthday, wedding anniversary, special occasion or countdown – these numbers add a personal and expressive touch to your projects. ✨ What makes this die-cut special : 🔢 Numbers from 0 to 8 for versatile combinations ✨ Delicate frame for a modern and sophisticated look 🖤 Large numbers with a striking effect 🎨 Perfect for layering and shadow effects 🌿 Highlights : Ideal for birthday and anniversary cards Perfect for dates and special occasions Lovely for scrapbooking and memory albums Modern design for numerous creative projects 💡 Perfect for : Birthdays 🎂 Anniversaries & special occasions 💛 Weddings & special milestones 💍 Scrapbooking & journaling 📒 Decorations and gift wrapping 🎁 👉 Tip : Die-cut the numbers several times in different colours and layer them slightly offset on top of one another. This creates beautiful shadow and 3D effects with a special sense of depth. A number die for special moments – modern, versatile and perfect for creative projects with personal significance 🔢✨💛 The numbers, including the frame, are approx. 9.3 cm high. Without the frame, the numbers are approx. 9.0 cm high. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 15 July 2026

🎄✨ Make your advent calendar something very special! With the Advent calendar numbers stamp set you can create personalised paper bags, boxes or envelopes for 24 little surprises - from elegant to playful. Included are: 🔢 Numbers 1-24 in different, lovingly crafted designs 🎁 Small decorative motifs such as stars, twigs and ornaments for additional festive accents Whether classic in black, elegantly embossed or brightly coloured 🎨 - the clear lines ensure a clean imprint and plenty of creative possibilities. With the Advent calendar numbers stamp set, you can conjure up an Advent calendar in no time at all that is not only fun to make, but also a real eye-catcher.The individual stamps have a diameter of approx. 1.5 cm The illustrations for this set were created by the lovely Carola aka Carolas Bastelstübchen.For particularly beautiful results, we recommend using the VersaFine Clair ink pads. So that you can get started right away, please remember: You will need a matching acrylic block - this is not included. 💡 Looking for inspiration? Browse through our [Pinterest board] - you'll find lots of great examples and ideas for this stamp set. 💕 📅 Published on: 29. October 2025

The "Designline - Bullet Journal" photopolymer stamp setconsists of 60 stamps on an A5 sheet.For all planner and bullet journal fans this set is a must have. You can create great calendars and journals with it, of course they also fit onlayouts from the last vacation.The stamps in this set have the following sizesJanuar (ca. 3,3 x 0,5 cm) (ca. 3,1 x 0,8 cm)Februar (ca. 3,4 x 0,6 cm) (ca. 3,0 x 0,8 cm)März (ca. 2,6 x 0,5 cm) (ca. 1,8 x 0,8 cm)April (ca. 2,4 x 0,6 cm) (ca. 1,8 x 0,9 cm)Mai (ca. 1,9 x 0,3 cm) (ca. 1,4 x 0,8 cm)Juni (ca. 2,2 x 0,5 cm) (ca. 1,5 x 0,8 cm)Juli (ca. 1,9 x 0,6 cm) (ca. 1,3 x 0,8 cm)August (ca. 3,2 x 0,7 cm) (ca. 2,7 x 0,9 cm)September (ca. 4,9 x 0,7 cm) (ca. 4,3 x 0,9 cm)Oktober (ca. 3,4 x 0,5 cm) (ca. 3,0 x 0,8 cm)November (ca. 4,6 x 0,4 cm) (ca. 4,0 x 0,8 cm)Dezember (ca. 4,3 x 0,6 cm) (ca. 3,9 x 0,8 cm)Zahlen Monat (ca. 4,1 x 4,0 cm)Rahmen (ca. 4,6 x 4,5 cm)#remember (ca. 2,7 x 0,4 cm)#nichtvregessen (ca. 4,0 x 0,5 cm)#diesunddas (ca. 3,0 x 0,4 cm)#don'tforget (ca. 3,0 x 0,5 cm)#lovethis (ca. 2,3 x 0,4 cm)#lieb's (ca. 1,5 x 0,4 cm)long strip (approx. 5.8 x 0.9 cm)medium strip (approx. 3.7 x 0.9 cm)small strip (approx. 1.0 0.9 cm)1 (approx. 0.1 x 0.5 cm)2 (approx. 0.3 x 0.5 cm)3 (approx. 0.4 x 0.5 cm)4 (approx. 0.3 x 0.5 cm)5 (approx. 0.4 x 0.5 cm)6 (approx. 0.4 x 0.5 cm)7 (approx. 0.3 x 0.5 cm)8 (approx. 0.3 x 0.5 cm)9 (approx. 0.3 x 0.5 cm)0 (approx. 0.3 x 0.4 cm). (approx. 0.1 x 0.1 cm)Mo (ca. 0,7 x 0,5 cm)Di (ca. 0,5 x 0,5 cm)Mi (ca. 0,5 x 0,5 cm)Do (ca. 0,6, x 0,5 cm)Fr (ca. 0,4 x 0,5 cm)Sa (ca. 0,6 x 0,5 cm)So (ca. 0,6 x 0,5 cm)montag (ca. 3,7 x 0,6 cm)dienstag (ca. 4,2 x 0,6 cm)mittwoch (ca. 4,7 x 0,4 cm)donnerstag (ca. 5,4 x 0,7 cm)freitag (ca. 3,3 x 0,7 cm)samstag (ca. 4,0 x 0,7 cm)sonntag (ca. 3,9 x 0,7 cm) The illustrations for this set have been drawn for us by Carola from Carolas Bastelstübchen .In order to use the stamps you will need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection . Take a look and get inspired.Besides the stamp set  "Designline - Bullet Journal"  we have other sets designed by artists. You can find them in the"Designline" section.Published on: 31. March 2023

The bundle - Punch sets - Elegant Alphabet Part 1 & 2 consists of two punch sets with 18 parts and 14 parts. With the punch set - Elegant Alphabet you get a versatile alphabet that impresses with its calm, elegant font ✨🤍. The letters look modern and classic at the same time and can be used wonderfully for names, words, initials or short messages. The set goes perfectly with our "Elegant Alphabet" stamp sets, but can of course also be used on its own - for maximum design freedom. The letters can be punched out individually and are ideal for: 🖋️ personalised cards 🎁 Gift tags & packaging 📓 Scrapbooking & journaling 🎉 Occasions such as weddings, birthdays, babies & anniversaries ↪So_279 ↪So_279 ➟ AnniversariesAnniversaries ✨ Subtle lettering in clean & simple designs The punches look particularly beautiful in metallic paper, vellum or classic cardstock - tone-on-tone or with a layered effect. 💖 Perfect for: 🔤 Names, initials & words 💌 Cards & envelopes 🎁 Personalised gifts 📓 Layouts & Cover ✨ elegant projects for the whole year ✨ special features: ⭐ elegant, timeless typeface 💎 clean cuts & clear linesclear lines 🎨 can be combined in many ways with stamps & punches 🔠 ideal for personalising ✨ can be used individually or in a word The Elegant Alphabet punch set gives your projects style, clarity and a very personal touch - a real basic for any creative collection ✨🔤🤍. The individual punches in this set have the following sizesA (approx. 4.3 x 4.2 cm)B (approx. 3.2 x 4.1 cm)C (approx. 3.5 x 4.3 cm)D (approx. 3.9 x 4.2 cm)E (approx. 3.1 x 4.6 cm)F (approx. 2.8 x 4.5 cm)G (approx. 4.0 x 4.7 cm)H (approx. 3.5 x 4.1 cm)I (approx. 1.6 x 4.1 cm)J (approx. 2.3 x 4.2 cm)K (approx. 3.5 x 4.1 cm)L (approx. 2.8 x 4.4 cm)M (approx. 5.0 x 4.2 cm)N (approx. 3.2 x 4.1 cm)O (approx. 4.1 x 4.2 cm)P (approx. 2.9 x 4.1 cm)Q (approx. 6.1 x 5.4 cm)R (approx. 3.7 x 4.1 cm)S (approx. 2.5 x 4.4 cm)T (approx. 3.0 x 4.4 cm)U (approx. 3.3 x 4.2 cm)V (approx. 4.1 x 4.2 cm)W (approx. 5.9 x 4.2 cm)X (approx. 3.1 x 4.1 cm)Y (approx. 3.2 x 4.2 cm)Z (approx. 2.9 x 4.8 cm). (diameter approx. 0.7 cm), (approx. 0.8 x 1.2 cm)- (approx. 2.2 x 0.5 cm)? (approx. 2.1 x 3.3 cm; diameter approx. 0.7 cm)! (approx. 0.6 x 3.2 cm; diameter approx. 0.7 cm)& (approx. 3.8 x 4.6 cm) The idea for this punch set comes from the lovely Annika Flebbe from Flebbe Art. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 16. January 2026

❄️✨ With the 3D snowflake punch, you can add magical wintry accents to your craft projects. The set consists of several diamond shapes of different sizes that are perfectly coordinated and can be put together in no time at all to create an impressive, three-dimensional snowflake. The clear, geometric lines give the snowflake a modern and elegant look - ideal for Christmas decorations, festive tags, cards or window decorations. Layering the different sizes creates an impressive 3D effect that will turn your projects into real eye-catchers. ⭐ Product details ❄️ Several diamond shapes in graduated sizes 📏 Perfect fit for a harmonious 3D look ✂️ Precise punched edges for neatly aligned elements 🎨 Suitable for paper, card, glitter paper, transparent paper and metallic materials 💛 Special features ✨ Ideal for 3D snowflakes, pendants & filigree winter decorations 🎄 Beautiful for Christmas cards, gift decorations and scrapbooking 🧊 Modern, geometric style - elegant and timeless 🧩 Can be used in a variety of ways: individually, layered or as a decorative element on layouts 💡 Also perfect for XXL decorations, window pictures or mobile crafts ❄️ Conclusion The 3D snowflake punch is a must-have for all winter and Christmas crafters who want to combine modern elegance with creative 3D effects. In just a few simple steps, you can create an artistic snowflake that enhances any DIY project and spreads winter flair. ✨❄️💙 The punch has the following size approx. 10.0 x 10 cm.You will need 6 punched parts for a finished 3D snowflake. The punch is made of 100% steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 13. December 2025