Stamp set - Designline - Bullet Journal

The bundle will be available as a ‘Wednesday Special’ on 16 September 2026 from 7.00 pm to 11.45 pm at a special price of €62; after that, it will cost €80. The offer is valid whilst stocks last. !!!Pre-order!!! We expect the dies to arrive at the end of October 2026 The “Bundle – 3D Numbers Zero to Nine” consists of 9 die-cut sets.With the “3D Numbers Zero to Nine” bundle, you’ll receive all the numbers from 0 to 9 and can create your own three-dimensional number combinations. Whether it’s a birthday, anniversary, year or a very special milestone – the individual numbers can be combined in countless ways and, thanks to their three-dimensional shape, make a real eye-catcher. Using different papers and colours, you can redesign them time and time again to suit any occasion. 💡 Tip: Combine several 3D numbers to create birthday numbers such as 18, 30 or 50, design years or personal lucky numbers. The numbers look particularly lovely when made from patterned paper, metallic cardstock or adorned with small floral and festive decorative elements. Or place the numbers on a backing of acetate film or tracing paper and fill them with shaker elements for a cool effect.  The finished 3D numbers are approx. 5.7 cm high and approx. 1.5 cm deep The dies are compatible with standard die-cutting and embossing machines (DieCut systems).You can use them for card, felt, fabric and shrink film.Material: 100% steelWe’ve compiled lots of ideas for this bundle on our Pinterest board and in our creative collection. Do have a look and get inspired.Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D One’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D ‘One’, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies come in the following sizesOne full-surface die (approx. 2.6 x 5.7 cm each) One frame (approx. 2.6 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 18.2 x 2.1 cm) The finished 3D number measures approx. 2.6 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve gathered lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the die-cuts to arrive at the end of October 2026With the ‘3D Four’ die, you can create a three-dimensional number that turns your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D four, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Four full-surface dies (approx. 4.0 x 5.7 cm each) Four frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 20.0 x 2.1 cm) Inner border (approx. 2.6 x 2.1 cm)The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100 % steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It is extremely versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an extra layer of backing or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not take a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026 With the ‘3D Seven’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D seven, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Seven solid-colour numbers (approx. 4.0 x 5.7 cm each) Seven frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 12.9 x 2.1 cm & 10.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the die-cuts to arrive at the end of October 2026With the ‘3D Zero’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D zero, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizesZero – full-surface (approx. 4.0 x 5.7 cm)Zero with frame (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm)Outer border (approx. 17.7 x 2.1 cm)Inner border (approx. 8.0 x 2.1 cm)The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Eight’ die, you can create a three-dimensional number that turns your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D eight, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Eight solid-filled (approx. 4.0 x 5.7 cm) Eight framed (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 18.4 x 2.1 cm)Inner border (approx. 3.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Six & Nine’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D six or nine, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are the following sizes:Six/Nine full-surface (approx. 4.0 x 5.7 cm each) Six/Nine framed (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 13.5 x 2.1 cm & 10.0 x 2.1 cm) Inner border (approx. 3.9 x 2.1 cm)The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Five’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled into a sturdy 3D five, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place transparent paper or acetate film behind the numbers and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Five full-size (approx. 4.0 x 5.7 cm each) Five frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 16.4 x 2.1 cm & 14.3 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Two’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D ‘2’, offering you brilliant design options for birthdays, anniversaries, year dates or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Two full-size (approx. 4.0 x 5.7 cm each) Two frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 16.4 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve gathered lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

!!!Pre-order!!! We expect the dies to arrive at the end of October 2026With the ‘3D Three’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D three, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place transparent paper or acetate film behind the numbers and fill them with shaker elements for a cool effect. You can customise the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are available in the following sizes:Three full-size (approx. 4.0 x 5.7 cm) Three frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 14.0 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and be inspired! 📅 Published on: 16 September 2026

Letters & numbers with a modern striped look With the ‘Alphabet Stripes’ stamp set, you can create custom lettering, names, numbers and personal messages with a truly unique look. The slim letters and numbers, with their striking striped design, look modern, light and unusual – perfect for creative projects where the typography itself becomes the centre of attention. From a quick ‘Hi’ to names and birthday numbers right through to personalised headings: with this alphabet, you have complete creative freedom. Perfect for : Names & initials Birthday and year numbers Personalised greeting cards Gift wrapping & tags Scrapbooking & journaling Headings and short statements Advent calendars & numbering 👉 Tip : Have fun stamping with different colours or stamp individual letters slightly offset. The delicate striped pattern also looks particularly striking in tone-on-tone colours or classic black. Combined with floral or graphic motifs, it creates modern designs that put your very own personal message centre stage. An alphabet for endless ideas – modern, personalised and, with its distinctive striped look, perfect for personalised lettering, names and numbers. The individual stamps have the following dimensions: Letters: height (approx. 2.6 cm) Numbers: height (approx. 2.6 cm) The illustrations for this set are by Carola from Carolas Bastelstübchen. ✅ Product details : • Photopolymer stamp set on an A6 sheet • Precise lines & clear stamping quality • Versatile for use on cards, gift wrapping, planners and more • Combines perfectly with other sets from our collection For particularly beautiful results, we recommend using the VersaFine Clair ink pads. To get started straight away, please remember: you’ll need a suitable acrylic block – this is not included. 💡 Looking for inspiration? Feel free to check out our [Design Team] or browse through our [Creative Collection] and [Pinterest board] – you’ll find lots of great examples and ideas featuring this stamp set. 💕 📅 Published on : 11 September 2026

🔢 ‘Large Numbers with Delicate Frames’ die – numbers with a special impact With the ‘Large Numbers with Delicate Frames’ die, you can create striking displays for birthdays, anniversaries, years and special milestones. The large numbers with their delicate frames create a modern and elegant look, making every number an eye-catcher in your creative projects. Whether it’s a birthday, wedding anniversary, special occasion or countdown – these numbers add a personal and expressive touch to your projects. ✨ What makes this die-cut special : 🔢 Numbers from 0 to 8 for versatile combinations ✨ Delicate frame for a modern and sophisticated look 🖤 Large numbers with a striking effect 🎨 Perfect for layering and shadow effects 🌿 Highlights : Ideal for birthday and anniversary cards Perfect for dates and special occasions Lovely for scrapbooking and memory albums Modern design for numerous creative projects 💡 Perfect for : Birthdays 🎂 Anniversaries & special occasions 💛 Weddings & special milestones 💍 Scrapbooking & journaling 📒 Decorations and gift wrapping 🎁 👉 Tip : Die-cut the numbers several times in different colours and layer them slightly offset on top of one another. This creates beautiful shadow and 3D effects with a special sense of depth. A number die for special moments – modern, versatile and perfect for creative projects with personal significance 🔢✨💛 The numbers, including the frame, are approx. 9.3 cm high. Without the frame, the numbers are approx. 9.0 cm high. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 15 July 2026

🎄✨ Make your advent calendar something very special! With the Advent calendar numbers stamp set you can create personalised paper bags, boxes or envelopes for 24 little surprises - from elegant to playful. Included are: 🔢 Numbers 1-24 in different, lovingly crafted designs 🎁 Small decorative motifs such as stars, twigs and ornaments for additional festive accents Whether classic in black, elegantly embossed or brightly coloured 🎨 - the clear lines ensure a clean imprint and plenty of creative possibilities. With the Advent calendar numbers stamp set, you can conjure up an Advent calendar in no time at all that is not only fun to make, but also a real eye-catcher.The individual stamps have a diameter of approx. 1.5 cm The illustrations for this set were created by the lovely Carola aka Carolas Bastelstübchen.For particularly beautiful results, we recommend using the VersaFine Clair ink pads. So that you can get started right away, please remember: You will need a matching acrylic block - this is not included. 💡 Looking for inspiration? Browse through our [Pinterest board] - you'll find lots of great examples and ideas for this stamp set. 💕 📅 Published on: 29. October 2025

The "Designline - Carolas Adventskalenderzahlen" photopolymer stamp set consists of 47 stamps on a large A5 sheet.Design your own tags for the Advent calendars. Stamp the backgrounds discreetly and then place the numbers and decorative elements on them. This way you can design the tags individually.In this stamp set you will find the following stamps:One (approx. 1.8 x 0.8 cm)Two (approx. 1,9 x 0,8 cm)Three (approx. 1,9 x 0,9 cm)Four (approx. 1.8 x 0.9 cm)Five (approx. 2.1 x 1.2 cm)Six (approx. 2.0 x 1.0 cm)Seven (approx. 2.5 x 0.9 cm)Eight (approx. 1.7 x 1.0 cm)Nine (approx. 2.1 x 0.9 cm)Ten (approx. 2.0 x 0.9 cm)Eleven (approx. 1.1 x 1.0 cm)Twelve (approx. 1.7 x 0.9 cm)Thirteen (approx. 3.5 x 0.9 cm)Fourteen (approx. 3.4 x 0.9 cm)Fifteen (approx. 3.8 x 1.1 cm)Sixteen (approx. 3.8 x 1.0 cm)Seventeen (approx. 3.2 x 0.9 cm)Eighteen (approx. 3.4 x 1.0 cm)Nineteen (approx. 3.9 x 1.0 cm)Twenty (approx. 3.0 x 1.0 cm)Twenty-one (approx. 5.5 x 1.3 cm)Twenty-two (approx. 6.0 x 1.3 cm)Twenty-three (approx. 5.8 x 1.1 cm)Twenty-four (approx. 5.2 x 1.1 cm)Rectangular frame (approx. 6.5 x 3.0 cm)Wood grain (approx. 6.5 x 3.0 cm)Speckles (approx. 6.3 x 3.0 cm)stripes (ca. 6,2 x 3,0 cm)small heart (ca. 0,3 x 0,3 cm)heart (ca. 0,6 x 0,6 cm)mini star (ca. 0,3 x 0,3 cm)small star (ca. 0,5 x 0,5 cm)star (ca. 0,7 x 0,7 cm)big star (ca. 1,0 x 1,0 cm)small berry (ca. 0,1 x 0,1 cm)mistletoe (ca. 0,8 x 1,2 cm)mistletoe with berries (ca. 0,5 x 0,8 cm)3 berries (ca. 0,3 x 0,2 cm)fir twigs (ca. 3,0 x 1,3 cm)3er fir branch (ca. 0,8 x 1,3 cm)2er fir branch (ca. 0,5 x 1,1 cm)fir tree (ca. 0,5 x 0,6 cm)curved fir tree (ca. 0,7 x 0,8 cm)doodle fir tree (ca. 0,5 x 0,6 cm)3 single blobs (diameter approx. 0.2 cm)The illustrations for this set were drawn for us by Carola from Carolas Bastelstübchen.To use the stamps, you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.In addition to the stamp set - Designline - Carolas Adventskalenderzahlen, we have other sets designed by artists. You can find them under the heading "Designline".Published on: 02 September 2022

WOW! - Embossing powder - Ebony - Ultra High "Not another technique" is the first statement when the question "Do you know embossing?" is asked It doesn't take much to find out whether embossing is for you. What you need Any ink pad (the lighter the ink pad, the better the colour of the embossing powder will stand out) A normal toaster from the kitchen (or even better: a hot air gun, which makes it much easier) Embossing powder Application: Simply sprinkle the powder onto the wet stamping ink. Pour the excess back into the tin. Then heat the card in a toaster (or, if available, with a heat gun) so that the powder melts. It will take a moment for the first change to be visible. When the powder melts and bonds with the paper, the WOW effect occurs and a new technique has crept into your heart.As soon as the powder has completely melted, remove the card from the heat, otherwise bubbles may form. If you keep pouring the excess powder back into the embossing tin, the 15ml tin will accompany you through your crafting life for a long time. The requirement for stamped lettering is very low.Embossed stamped objects remain beautiful for a long time and do not smudge like normal stamping ink. Looking for more explanations or inspiration? All embossing-related products HERE. 15ml in a small tin with screw cap

Die - Schmale Ziffern - KleinA great 15-piece punch set withlarge narrow numbers and special characters.The punches are perfect for layouts or for cards for special birthdays.The punches have a height of about 3.5 cm.The punch works with the most popular die cutting and embossing machines (DieCut systems). You can use them for cardboard, felt, fabric, shrink wrap.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 11. August 2023