Die - 3D Zero

Mit dem Stempelset „Kleine runde Zahlen & Co.“ bekommst du eine vielseitige Mischung aus Zahlen, Zeichen und kleinen Symbolen im charmanten runden Design. Neben den Zahlen findest du unter anderem Herz, Stern, Krone, Kleeblatt, Briefumschlag, Tannenbaum sowie verschiedene fröhliche Gesichter. Perfekt für kleine Akzente, Nummerierungen, Adventskalender, Anhänger und viele weitere kreative Projekte. 💡 Tipp: Nutze die Zahlen für Adventskalender, Geburtstage oder kleine Nummerierungen und kombiniere sie mit dem beliebtem Stempelset "Kleines rundes ABC" und der passenden Outline Stanze "Kleines rundes ABC-Outline".Die unterschiedlichen Gesichter eignen sich außerdem wunderbar, um Karten, Tags und kleinen Botschaften im Handumdrehen einen fröhlichen Charakter zu verleihen.Der Stempel hat eine Größe von ca. 9,5 x 5,9 cmDie Kreise haben einen Durchmesser von ca. 1,3 cmDie Illustrationen für dieses Set stammen von der lieben Andrea aka Frau Blütenstempel.  ✅ Produktdetails: • Photopolymer-Stempelset auf A7 Sheet • Präzise Linienführung & klare Abdruckqualität • Vielseitig einsetzbar für Karten, Verpackungen, Planer & mehr • Ideal kombinierbar mit anderen Sets aus unserer Kollektion Für besonders schöne Ergebnisse empfehlen wir die Verwendung der VersaFine Clair Stempelkissen. Damit du sofort loslegen kannst, denk bitte daran: Zur Anwendung benötigst du einen passenden Acrylblock – dieser ist nicht im Lieferumfang enthalten. 💡 Inspiration gesucht? Schau gerne bei unserem [Designteam] vorbei oder lass dich durch unsere [Kreativsammlung] und [Pinterest-Pinnwand] treiben – dort findest du viele tolle Beispiele & Ideen rund um dieses Stempelset. 💕 📅 Veröffentlicht am: 18. September 2026

The ‘Bundle – Capital Alphabet’ consists of a 15-piece letter stamp set (A–O) and a 17-piece stamp set featuring letters P–Z plus special characters. The ‘Capital Alphabet’ bundle combines two stamp sets featuring the complete alphabet in an elegant serif font, along with complementary punctuation and special characters. Create personalised names, heartfelt messages and striking initials for cards, gift wrapping and scrapbooking pages. The large letters ensure your hand-stamped lettering really stands out.💡 Tip: Lay out the letters as a test before stamping to determine spacing and alignment. Combine a name in a bold colour with a short greeting for a personalised card. The letters are approximately 4.2 cm highThe idea for this bundle came from the lovely Sandra, aka Papier und Passion.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in lots of different ways – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 30 October 2026

The ‘Bundle – Capital Alphabet – Outline’ consists of a 15-piece die-cut set of letters A–O and a 17-piece die-cut set featuring letters P–Z plus special characters. The ‘Capital Alphabet – Outline’ bundle combines the two outline die-cut sets, featuring all letters from A to Z as well as additional punctuation and special characters. To complement the ‘Capital Alphabet’ stamp sets, you can die-cut your stamped letters with precision – without having to cut them out by hand. This allows you to create personalised names, words and initials for cards, gift wrapping and scrapbooking pages.💡 Tip: Cut out the letters from coloured paper as well and position them slightly behind the stamped letters. This gives your lettering a lovely shadow effect. The letters are approx. 4.7 cm highThe idea for this bundle came from the lovely Sandra, aka Papier und Passion.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 30 October 2026

With the ‘3D Two’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D ‘2’, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Line the numbers with tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:. Two full-surface dies (approx. 4.0 x 5.7 cm each). Two frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm). Outer border (approx. 16.4 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional shim or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

With the ‘3D Five’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D five, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Line the numbers with tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:: Five solid dies (each approx. 4.0 x 5.7 cm), five frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 16.4 x 2.1 cm & 14.3 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do take a look and be inspired! 📅 Published on: 16 September 2026

With the ‘3D Seven’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D seven, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Place the numbers on tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:: Seven solid panels (approx. 4.0 x 5.7 cm each), seven frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 12.9 x 2.1 cm & 10.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not take a look and get inspired! 📅 Published on: 16 September 2026

With the ‘3D Eight’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D eight, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Line the numbers with tracing paper or acetate and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies have the following dimensions:: Eight solid shapes (approx. 4.0 x 5.7 cm), eight frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 18.4 x 2.1 cm), inner border (approx. 3.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

With the ‘3D One’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D ‘1’, offering you brilliant design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are the following sizes: One solid (approx. 2.6 x 5.7 cm each) One frame (approx. 2.6 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 18.2 x 2.1 cm) The finished 3D number measures approx. 2.6 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

With the ‘3D Three’ die-cut, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D Three, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly attractive when decorated. 💡 Tip : Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are as follows:: three solid shapes (approx. 4.0 x 5.7 cm), three frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) and outer borders (approx. 14.0 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

With the ‘3D Four’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D four, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies have the following dimensions:: Four full-surface dies (approx. 4.0 x 5.7 cm each), four frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 20.0 x 2.1 cm) Inner border (approx. 2.6 x 2.1 cm). The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

With the ‘3D Six & Nine’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D six or nine, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies have the following dimensions:: Six/Nine solid (approx. 4.0 x 5.7 cm each); Six/Nine frame (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm); outer border (approx. 13.5 x 2.1 cm & 10.0 x 2.1 cm) Inner border (approx. 3.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ Card ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

Using the die-cut ‘Alphabet with a delicate border’ you get the complete alphabet from A to Z as well as a & symbol. Each letter consists of a clear base shape with a delicate outline, so you can use the elements individually or in multiple layers. Perfect for names, personalised lettering, headings and personalised messages on cards, packaging and scrapbooking projects.💡 Tip: Die-cut letters and frames from different coloured papers and assemble them together. This creates modern contrasts and beautiful layering effects. Modern letters for every occasion. The dies come in the following sizes:The letters, including the frame, are approx. 6.7 cm high The letters are approx. 6.5 cm tall without the frame The idea for these dies came from the lovely Andrea, aka Frau Blütenstempel. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it is suitable for, amongst other things: ✔ ️ Card ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 9 October 2026

⭐ ✨ Classic, elegant and versatile The "Star - 12-pointed" die-cutter is a real must-have for anyone who wants to add festive accents to their craft projects. With its harmonious shape and clear lines, the die-cutter is perfect for Christmas cards, gift wrapping, decorations and many other creative ideas. The 12-pointed star looks particularly elegant as a central motif, background element or as a sparkling highlight in combination with transparent paper or metallic card. 🎁 Versatile in use 🎄 Christmas decoration: for pendants, window decorations or table decorations 💌 C ard & scrapbooking projects: as a highlight or frame motif 🎁 Gift decorations: on boxes, tags or packaging 🌟 Can be combined: ideally with the Christmas medallion, fir forest or angel punches 💡 Tip Cut out the star twice and offset the shapes slightly against each other - this creates a wonderful, sparkling 3D effect that will make your Christmas projects even more festive. The individual punches have the following size: Star (approx. 2.1 x 2.1 cm)Star (approx. 3.1 x 3.1 cm)Star (approx. 4.6 x 4.6 cm)Star (approx. 6.6 x 6.6 cm)Star (approx. 8.6 x 8.6 cm) The punch is made of 100% steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 05 December 2025

The add-on ‘House Front 1 – Small’ complements the “Papierschorsch’s World of Houses – Basic Set – Small” with a charming façade featuring a classic pointed gable, six arched windows and a small heart. You can use this to create your own unique paper houses for decorations, small gift wrappings and atmospheric miniature worlds.💡 Tip: Line the heart and individual windows with different coloured paper to give the house front a lively and personalised look. The die measures approx. 5.5 x 10.0 cmThe idea for this die-cut series comes from the lovely Stephie, aka Papierschorsch.  The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front 2 – Small’ complements the “Papierschorsch’s World of Houses – Basic Set – Small” with a striking façade featuring a classic stepped gable and four arched windows. This allows you to create a variety of paper houses for small gift wrappings, decorations and customised rows of houses.💡 Tip: Die-cut the house front from patterned paper with a brick or stone effect and line the windows with a contrasting colour. The die measures approx. 5.5 x 10.4 cmThe idea for this die-cut series came from the lovely Stephie, aka Papierschorsch The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co).It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front 3 – Small’ complements the ‘Papierschorsch’s World of Houses – Basic Set – Small’ with an elegant façade featuring a curved gable, straight-lined windows and a decorative star. The distinctive shape adds variety to your rows of little houses and is perfect for festive decorations and lovely gift wrapping.💡 Tip: Place metallic or glitter paper behind the star to make it a sparkling centrepiece of your house front. The die measures approx. 5.5 x 10.2 cm.The idea for this die-cut series comes from the lovely Stephie, aka Papierschorsch.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co).It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid.📌 Looking for inspiration?We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front 4 – Small’ complements the ‘Papierschorsch’s World of Houses – Basic Set – Small’ with a simple house front featuring a sloping roof, two windows and a charming heart. The timeless design is ideal for small gift boxes, decorations and personalised house scenes for a wide range of occasions.💡 Tip: Create the roof area using patterned paper or give it a special texture using an embossing die. The die measures approx. 6.3 x 9.8 cm. The idea for this die-cut series comes from the lovely Stephie, aka Papierschorsch.  The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front II – Large’ complements the ‘Papierschorsch’s World of Houses – Basic Set – Large’ with a clean-lined façade featuring a wide roof, two windows and a large heart as a special eye-catcher. The timeless design is perfect for decorations and lovingly crafted house projects for a wide range of occasions.💡 Tip: Place glitter, metallic or coloured transparent paper behind the heart to personalise the house front. The die measures approx. 12.4 x 19.4 cmThe idea for this die-cut series comes from the lovely Stephie, aka Papierschorsch. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ shrink wrap 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front I – Large’ complements the ‘Papierschorsch’s World of Houses – Basic Set – Large’ with a striking façade featuring a tall stepped gable and four large arched windows. This allows you to create impressive paper houses and varied rows of houses.💡 Tip: Line the windows with warm yellow tracing paper and add small curtains or window decorations for a particularly cosy look. The die measures approx. 11.0 x 20.5 cm The idea for this die-cut series comes from the lovely Stephie, aka Papierschorsch. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and be inspired! 📅 Published on: 19 October 2026

A new façade for your little house. With the ‘Papierschorsch’s World of Houses – Add-On – House Front 1 – Medium’ die-cut, you can design a special house front to match the ‘Papierschorsch’s World of Houses – Basic Set – Medium’. The façade, featuring a chimney, lots of little windows and a decorative star, gives your little house a charming, wintry look.💡 Tip: Place tracing paper behind the windows and the star, and place an LED light inside the finished little house. This creates a cosy glow for your winter decoration. The die-cut measures approx. 8.2 x 15.0 cmThe idea for this die comes from the lovely Stephie Kasper, also known as Papierschorsch. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 12 October 2026

A distinctive façade with a stepped gable. Using the ‘Papierschorsch’s World of Houses – Add-On House Front 3 – Medium’ die-cut, you can create a unique house front to match the ‘Papierschorsch’s World of Houses – Basic Set – Medium’. The striking stepped gable and the delicate arched windows lend the little house a charming, traditional character and add variety to your world of houses.💡 Tip: Line the windows with tracing paper and combine the façade with different colours and textures. An LED light inside creates a cosy glow. The die-cut measures approx. 8.2 x 15.5 cm The idea for this die comes from the lovely Stephie Kasper, aka Papierschorsch.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 12 October 2026

Using the die ‘Papierschorsch’s World of Houses – Add-On – House Front 6 – Medium’ you can create another house front to match the “Papierschorsch’s World of Houses – Basic Set – Medium”. The tall pointed roof with a chimney and the numerous clear windows give the little house a simple, modern look.💡 Tip: Combine this house front with the other façades in the series to create a varied little row of houses. Using different paper colours gives each little house its own unique character. The die-cut measures approx. 8.2 x 15.0 cm The idea for this die came from the lovely Stephie Kasper, also known as Papierschorsch.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 12 October 2026

With the ‘Papierschorsch’s World of Houses – Add-On – House Front 7 – Medium’ die-cut, you can create another façade to match the ‘Papierschorsch’s World of Houses – Basic Set – Medium’. The tall stepped gable and the three arched windows give the little house a clean, classic look and add variety to your world of houses. 💡 Tip: Decorate the simple façade with small twigs, stars, flowers or lettering, depending on the season. This way, you can redesign the little house time and time again. The die-cut measures approx. 8.2 x 15.5 cm The idea for this die comes from the lovely Stephie Kasper, also known as Papierschorsch.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 12 October 2026

An elegant façade with a curved gable. Using the ‘Papierschorsch’s World of Houses – Add-On – House Front 4 – Medium’ die-cut, you can create another house front to match the ‘Papierschorsch’s World of Houses – Basic Set – Medium’. The curved gable, the tall rows of windows and the decorative star give the little house an elegant yet festive look.💡 Tip: Another fantastic house front. Use it to create a unique world of houses thanks to the elegant façade. Backed with tracing paper and an LED light, it makes for a beautiful decoration. The die-cut measures approx. 8.2 x 15.3 cm The idea for this die comes from the lovely Stephie Kasper, aka Papierschorsch.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 12 October 2026

With the ‘3D Five’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D five, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Line the numbers with tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:: Five solid dies (each approx. 4.0 x 5.7 cm), five frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 16.4 x 2.1 cm & 14.3 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do take a look and be inspired! 📅 Published on: 16 September 2026

With the ‘3D Six & Nine’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D six or nine, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies have the following dimensions:: Six/Nine solid (approx. 4.0 x 5.7 cm each); Six/Nine frame (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm); outer border (approx. 13.5 x 2.1 cm & 10.0 x 2.1 cm) Inner border (approx. 3.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ Card ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

With the ‘3D Two’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D ‘2’, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Line the numbers with tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:. Two full-surface dies (approx. 4.0 x 5.7 cm each). Two frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm). Outer border (approx. 16.4 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional shim or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

With the ‘3D Seven’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D seven, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Place the numbers on tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:: Seven solid panels (approx. 4.0 x 5.7 cm each), seven frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 12.9 x 2.1 cm & 10.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not take a look and get inspired! 📅 Published on: 16 September 2026

With the ‘3D Four’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D four, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies have the following dimensions:: Four full-surface dies (approx. 4.0 x 5.7 cm each), four frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 20.0 x 2.1 cm) Inner border (approx. 2.6 x 2.1 cm). The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

With the ‘3D One’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D ‘1’, offering you brilliant design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are the following sizes: One solid (approx. 2.6 x 5.7 cm each) One frame (approx. 2.6 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 18.2 x 2.1 cm) The finished 3D number measures approx. 2.6 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026