Stamp set - Befüll mich
€13.95
Available, delivery time: 5 days
Product information "Stamp set - Befüll mich"
The "Befüll mich" photopolymer stamp set
consists of 22 stamps on a large A6 sheet.
Glasses or domes which are filled with small balls;
Gingerbread houses, little trees, etc.
would like to be.
The small motifs can also be very
well on water slide foil for candles
stamp and enchant your Christmas decoration.
The individual stamps have the following sizes
Wide glass (approx. 3.5 x 3.8 cm)
Tall glass (approx. 2.7 x 4.6 cm)
Dome (ca. 2,0 x 3,3 cm)
Dome with bow (ca. 2,3 x 4,2 cm)
small glass (ca. 1,8 x 1,5 cm)
round fir tree (ca. 1,2 x 1,6 cm)
fir tree with balls (ca. 1,4 x 2,1 cm)
fir tree with star (ca. 1,0 x 2,3 cm)
Fir tree (ca. 1,1 x 2,3 cm)
Fir tree with heart (ca. 1,4 x 2,3 cm)
Gingerbread house 1 (ca. 1,3 x 2,1 cm)
Gingerbread house 2 (approx. 1,2 x 1,9 cm)
Gingerbread house 3 (ca. 1,1 x 1,3 cm)
House on small table (ca. 0,9 x 2,4 cm)
Sock (ca. 1,5 x 2,1 cm)
bell (ca. 0,9 x 1,8 cm)
oblong ball (approx. 0.4 x 2.3 cm)
oblong ball 2 (approx. 0.7 x 2.9 cm)
oblong ball 3 (approx. 0.6 x 1.8 cm)
sphere (ca. 0,7 x 2,3 cm)
stars 1 (approx. 0.7 x 1.0 cm)
Stars 2 (approx. 0.8 x 1.0 cm)
You can find the matching dies HERE.
To use the stamps you need acrylic blocks, which are not included in this offer.
We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.
Published on: 01 August 2022
Mehr Weihnachtliches
Mit der Wortstanze "Festtage" könnt ihr eure weihnachtlichen Layouts beschriften und in Kombination mit passenden Stempeln oder einem handschriftlichen Journaling im Handumdrehen euer Dezember Daily fertigstellen. Die Stanze hat folgende Größe: 65 mm x 32 mm Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 06. August 2021
Das Licht der Liebe zum Weihnachtsfest als Stanzteil auf Deiner Weihnachtskarte. Mit einer Gesamthöhe von 77 mm und 57mm Breite passt es toll auf eine Grußkarte und nur mit wenig Aufwand ist eine sehr edle Karte gezaubert. Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 10. September 2021
Mit unserer "gepierctes Haus vom Nikolaus" Stanze lassen sich Briefe, Karten oder Boxen gestalten. Das besondere bei dieser Stanze ist, das nichts ausgestanzt wird, sondern kleine Punkte in das das Papier gestochen (gepierct) werden. Du erhältst also kein Stanzteil, sondern es entsteht ein Muster auf dem Werkstück. In diesem Fall ergeben die Punkte den Umriss vom "Haus vom Nikolaus". Gepierctes Haus vom Nikolaus ist ca. 3,60 cm hoch und 2,45 cm breit. Wer vermeiden möchte, dass sich der Rand der Stanze mit auf der Papier prägt, der kann beim Stanzen diese Prägematte verwenden. Bei uns hat es super funktioniert. Der Aufbau bei unserer Standard BigShot war wie folgt: Multipurpose Plattform, die Adapterplatten 1 und 2 aufklappen, die Stanzplatte auf die Plattform legen, dann die Stanze mit dem Muster nach oben auf die Stanzplatte legen. Auf die Stanzform das Papierstück, darauf die Prägematte, auf die Matte die nächste Stanzplatte und dann alles zusammen durch die Maschine kurbeln. Bei uns hat sich so der Rand der Stanze nicht mit eingeprägt. Die Pärgematte ist nicht Teil dieses Artikels, sie ist separat erhältlich. Achtung: Die kleinen Punkte zum Piercen des Papiers sind sehr spitz, bitte vorsichtig hantieren. Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Neben der "Gepierctes Haus vom Nikolaus" haben wir noch andere Stanzen in ähnlicher Machart. Diese findet ihr HIER. Veröffentlicht am: 27. September 2019
Die - Fähnchen mit Streupunkten - Weihnachten ist ein Stanzen Duo. Ihr könnte mit diesen tollen Hinguckern Euer Papierprojekt super schön verzieren. Die Fähnchen können gefalzt werden, damit Ihr das Ende der Fähnchen umknicken könnt und sie so wunderbar über die Kante der Karte platzieren könnt. Darauf abgebildet ist einmal eine Glocke und ein Engel. Beide Fähnchen sind ja: ca. 4,9 cm hoch und ca.2,0 cm breit. Achtung: Diese Stanze ist ein Set aus 2 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Inspirationen findet ihr bei Pinterest und in unserer Kreativsammlung. Mögt ihr unsere Stanze "Fähnchen mit Streupunkten - Weihnachten" aber wünscht euch ein anderes Design? Dann schaut euch mal DIESE Stanzen an. Veröffentlicht am: 01. August 2020
Die Motivstanze "Moderner Weihnachtsbaum" ist eine tolle Ergänzung eurer weihnachtlichen Stanzen. Sie wirkt durch ihre Form sehr modern. Die Stanze hat folgende Größe: ca. 55 mm x 31 mm Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 06. August 2021
Das “Mit ganz viel Herz" Photopolymer Stempelset besteht aus 11 Stempeln auf einem A6 Sheet. Liebe Grüße mit ganz viel Herzen verschicken - mit diesem Set kein Problem. Ein rechteckiger Stempel mit vielen Herzen und einer Reihe Platz in der Grüße eingesetzt werden können. Folgende Stempel findet ihr in diesem Set: Rechteckiger Stempel mit Herzen: ca. 8,5cm x 5,0cm Reihe mit 4 Herzrahmen: ca. 5,1cm x 1,1cm Reihe mit 4 Herzen: ca. 5,1cm x 1,1cm kleine Herzen: ca. 4,2cm x 1,4cm FÜR DICH HURRA GUTSCHEIN DU BIST TOLL MIT VIEL HERZ ETWAS HÜFTGOLD DU BIST EIN GOLDSTÜCK Damit die Stempel verwendet werden können benötigt Ihr Acrylblöcke, die nicht mit in diesem Angebot beinhaltet sind. Viele Ideen zu diesem Stempelset haben wir auf unserer Pinterest-Pinnwand und in unserer Kreativ-Sammlung zusammengetragen. Schaut doch mal vorbei und lasst Euch inspirieren. Veröffentlicht am: 30. April 2021
Das Stanzen Duo "Gestreifte Tannen", besteht aus zwei Stanzen im Negativ-Look. Die Stanzung schneidet hierbei das Papier raus und hinterlässt einen gestreiften Tannenbaum als Negativ stehen. Tannenbaum - groß ist ca. 7,07 x 3,87 cm Tannenbaum - mittel ist ca. 4,74 x 2,52 cm Die Stanze funktioniert mit den gängigen "DieCut Systemen". Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Achtung: Diese Stanze ist ein Set aus 2 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend. Material: 100% Stahl Made in USA Inspirationen findet ihr bei Pinterest und in unserer Kreativsammlung. Neben der "Gestreifte Tannen" haben wir noch weitere tolle Saisonstanzen im Shop. Diese findet ihr HIER. Veröffentlicht am: 01. Aug 2020
The - Designline - Christmas bauble - Ufo A magical Christmas bauble that will turn your Christmas mailand packages into something very special and elegant.The punches in this set have the following sizes Ufo background (approx. 6.6 x 4.2 cm) Ufo overlay (approx. 6.6 x 4.2 cm) Eyelet (approx. 0.9 x 1.0 cm) "Ribbon" (approx. 0.1 x 8.1 cm) The idea for this punch set comes from the lovely Andrea aka Frau Blütenstempel. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected lots of great ideas for this die-cutter. Take a look and let yourself be inspired. Published on: 18. November 2022
Using the punch ‘Decorate it – Stamps – Gifts’ you can create two cute gift parcels with lovely bow details. The small motifs are perfect for decorating stamps, Christmas cards, gift tags and festive wrapping.💡 Tip: Combine the gifts with the punches ‘Stamp Sheets with Overlays I and II’. The little parcels made from coloured paper look particularly lovely with bows in a matching contrasting colour. The individual dies are the following sizes:Gift (approx. 1.3 x 1.8 cm)Gift (approx. 1.5 x 1.4 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 13 November 2026
Die - Decorate it - AdventsleuchterA beautiful, simple candlestick for the Advent season. It fits perfectlyon top of our fireplace. The punch has a size of approx. 3.7 x 2.7 cm. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 18. December 2024
Die - Decorate it - Hängedeko mit SternenA cute Christmas mobilewith hanging baubles and stars.You can use it to add a Christmassy touch to the windowof the coffee mug box, for example.The punch measures approx. 3.5 x 5.1 cm. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 13. December 2024
The "Designline - Partydeko" photopolymer stamp setconsists of 1 stamp on a large A6 sheet.A eooler background stamp the perfectas background on invitation cards for the next party fits. The stamp has a size of approximately 9 x 13.6 cm.The illustrations for this set has Andrea of Mrs. Blossom Stamps drawn for us.So that the stamps can be used you need acrylic blocks, which are not included in this offer.We've gathered lots of ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.In addition to the stamp set - Designline - Party Decoration, we have other sets designed by artists. You can find them under the heading "Designline".Published on: September 23 2022
The "Stempelset - Designline - Karten - Adventskalender - Hintergrund Sterne" photopolymer stamp set consists of 1 stamp on an A6 sheet. A beautiful background stamp with many stars and a shooting star to fulfil wishes.The stamp measures approx. 8.5 x 13.0 cm.The illustrations for this set were drawn for us by Carola from Carolas Bastelstübchen. You will need acrylic blocks to use the stamps, which are not included in this offer. We have collected lots of ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and let yourself be inspired. Published on: 01 August 2024
Ein 3er Set Kreisstanzen, jeder der Kreise hat ein eigenes Motiv. Das Winter Dreierlei ist eine Stanze mit drei einzelnen Kreisen. In dem Kreis bleiben eine wunderschöne Schneeflocke, ein Bärchenkopf und ein Rahmen-Herz stehen. Die ist eine Negativstanze, ihr erhaltet kein ausgestanztes Motiv, sondern eine Stanzung im Negativ. Gestaltet damit entweder wunderschöne Geschenkanhänger oder verseht euren Kartenaufleger mit einem richtigen Blickfang. Besonders schön sind die Kreise wenn sie mit farbigem Papier hinterlegt werden, aber auch ton-in-ton fallen sie direkt ins Auge. In den Beispielen findet ihr erste Anregungen von unserem Designteam. Achtung: Bei dieser Variante ist der Tropfen am Herz nicht gefüllt. Jeder einzelne Kreis ist ca. 4,00 cm hoch und ca. 4,00 breit. In Kürze finden sich hier auch Beispiele von unserem Designteam. In unserer Kreativsammlung und auf Pinterest haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Für ein besseres Stanzergebnis die beiden Stanzen von dem Gebrauch trennen. Den Link zu einer Anleitung dazu findet Ihr einen Absatz weiter unten. Achtung: Diese Stanze ist ein Set aus 3 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend. Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Zum "Winter Dreierlei" lässt sich DIESE Stanze toll kombinieren. Veröffentlicht am: 01. August 2020
Die - Polarbärkreis: A super cute 5-piece punch set. The three polar bears peek out of this cute negative punch . With the matching accessory punches you can "dress" them tops, hat and scarf. The punch has a diameter of about 8.8 cm. Here you will not get a punched out motif with this punch! The punch works with standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelMade in USA On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 21. October 2022
Using the die-cut ‘Decorate it – Stamps – Orange and Nuts’ you can create lovely wintery details. The orange with its leaf and the little nuts lend your stamps, Christmas cards, gift tags and packaging a cosy, natural charm.💡 Tip: Combine the motifs with the punches ‘Stamp Strips with Overlays I and II’ and the other ‘Decorate it – Stamps’ dies. The orange in warm orange tones and the nuts in natural brown tones look particularly lovely. The individual dies are as follows:Orange (approx. 2.7 x 2.1 cm)Nut (approx. 1.7 x 0.8 cm)Nut (approx. 1.8 x 0.8 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it is suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 13 November 2026
Using the die-cut ‘Decorate it – Stamps – House and Fir Tree’ you can create enchanting little winter scenes. The two cute little houses and the delicate fir tree combine beautifully to add lovely winter touches. Ideal for decorating stamps, Christmas cards, gift tags and festive wrapping.💡 Tip: Combine the designs with the punches ‘Stamp Sheets with Overlays I and II’ and the other ‘Decorate it – Stamps’ motifs to create little winter village scenes. The little houses look particularly lovely in different paper colours and with small 3D effects. The individual dies are as follows:House (approx. 0.9 x 1.0 cm)Church (approx. 2.0 x 1.9 cm)Fir tree (approx. 1.1 x 2.1 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it is suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 13 November 2026
Using the die-cut ‘Decorate it – Stamps – Wreath and Baubles’ you can create beautiful festive details. The delicate wreath and the two Christmas tree baubles in different sizes can be combined in many ways and add a festive touch to stamps, Christmas cards, gift tags and wrapping.💡 Tip: Combine the motifs with the punches ‘Stamp Tear-Off Sheets with Overlays I and II’ and the ‘Decorate it – Stamps’. The wreath in various shades of green and the Christmas baubles made from metallic or glitter paper look particularly elegant. The individual punches are as follows:Wreath (approx. 3.2 x 3.3 cm)Bauble (approx. 1.1 x 1.6 cm)Bauble (approx. 1.4 x 2.0 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 13 November 2026
The ‘Nuts & Co for St. Nicholas Boots’ die-cut set brings the traditional magic of St. Nicholas straight into your craft world. The set includes lovingly designed nuts and oranges that combine beautifully with the ‘St. Nicholas Boots’ die-cut. This way, your paper boots will be filled in true traditional style. 💡 Tip:Whether you go for a natural look in shades of brown and orange, an elegant gold finish, or a colourful design – these motifs give you plenty of creative freedom. The individual dies are the following sizesOrange (approx. 3.3 x 2.6 cm)Nut (approx. 1.6 x 0.8 cm)Nut (approx. 1.0 x 0.9 cm)Nut (approx. 1.4 x 1.3 cm)Nut (approx. 0.8 x 0.8 cm)Nut (approx. 1.2 x 1.0 cm)Nut (approx. 1.3 x 1.1 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 30 October 2026
Mit unserer großen "Klassischer Tannenbaum - gepierct" Stanze lassen sich Briefe, Karten oder Boxen gestalten. Das besondere bei dieser Stanze ist, das nichts ausgestanzt wird, sondern kleine Punkte in das das Papier gestochen (gepierct) werden. Du erhältst also kein Stanzteil, sondern es entsteht ein Muster auf dem Werkstück. In diesem Fall ergeben die locker verteilten Punkte einen großen Tannenbaum. Klassischer Tannenbaum - gepierct ist ca. 10,53 cm hoch und 6,70 cm breit. Wer vermeiden möchte, dass sich der Rand der Stanze mit auf der Papier prägt, der kann beim Stanzen diese Prägematte verwenden. Bei uns hat es super funktioniert. Der Aufbau bei unserer Standard BigShot war wie folgt: Multipurpose Plattform, die Adapterplatten 1 und 2 aufklappen, die Stanzplatte auf die Plattform legen, dann die Stanze mit dem Muster nach oben auf die Stanzplatte legen. Auf die Stanzform das Papierstück, darauf die Prägematte, auf die Matte die nächste Stanzplatte und dann alles zusammen durch die Maschine kurbeln. Bei uns hat sich so der Rand der Stanze nicht mit eingeprägt. Die Pärgematte ist nicht Teil dieses Artikels, sie ist separat erhältlich. Achtung: Die kleinen Punkte zum Piercen des Papiers sind sehr spitz, bitte vorsichtig hantieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Inspirationen findet ihr bei Pinterest und in unserer Kreativsammlung. Mögt ihr unsere Stanze "Klassischer Tannenbaum - gepierct" aber wünscht euch ein anderes Design? Dann schaut euch mal DIESE Stanzen an. Veröffentlicht am: 01. August 2020
Die "gepunktete Doodle Schneeflocke" ist ein toller Blickfang auf euren weihnachtlichen Projekten. Sei es eine Karte, ein Geschenkanhänger oder ein Layout - diese Schneeflockenstanze ist immer eine gute Wahl. Das Besondere bei dieser Stanze ist, das nichts ausgestanzt wird, sondern kleine Punkte in das das Papier gestochen (gepierct) werden. Du erhältst also kein Stanzteil, sondern es entsteht ein Muster auf dem Werkstück. Die Stanze hat einen ca. Durchmesser von 78 mm Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 06. August 2021
The "Color me - Nikolausmützen - groß" photopolymer stamp setconsists of 5 stamps on a large A6 sheet.Cool Santa Claus hats in different shapesto color. In this set is for each Santa Claus a suitable cap.The individual stamps have the following sizes1st row 1st cap (approx. 4.2 x 5.5 cm)2nd row cap (approx. 4.2 x 4.5 cm)2nd row1st cap (approx. 6.5 x 3.2 cm)3rd row 1st cap (approx. 3.2 x 5.6 cm)2nd row cap (approx. 3.5 x 5.6 cm)You can find the matching dies HERE.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: 01 August 2022
Die - Rentier Dreierlei: A super cute 4-piece punch set. The cute reindeer peek times briefly around the corner and conjure up a smile on the face. Matching the three reindeer squares is still a larger square, so that the windows with frames can be punched out . The punches have the following sizes Square with reindeer (approx. 5.3 x 5.3 cm) Square (approx. 6.0 x 6.0 cm) The punch works with standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelMade in USA We've collected lots of great ideas for this punch on Pinterest and in our creative collection . Take a look and get inspired. Published on: 07 October 2022
Die - Designline - Adventshaus - Tanne With this punch you can cut out the matchingfir trees for the Advent houses. The following design papers are suitable for thisCD-DP-813CD-DP-814CD-DP-815CD-DP-816The two Advent houses are included, 1st Advent house and 2nd Advent house. The die-cuts are approx. 7.5 x 12.5 cm in size The idea for this punch set is from the lovely Sonja Peters aka so.papersblue. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch at Pinterest and in our creative collection . Take a look and let yourself be inspired. Published on: 10. November 2023
Other crafters also bought
The "Große Kaffeeliebe - Motive" photopolymer stamp setconsists of 20 stamps on a large A5 sheet.A beautiful set for all coffee lovers andMilk froth slurper....Great motifs to color with the with magical sayings wonderful can be combined.The individual stamps in this set have the following sizesCoffee pot (approx. 3.9 x 4.7 cm)Thermos flask (approx. 3.0 x 4.5 cm)Coffee cup with flowers (approx. 3.1 x 2.3 cm)Coffee cup with milk foam (ca. 3,3 x 3,0 cm)Coffee cup and woollen blanket (approx. 4.5 x 3.1 cm)to go mug (approx. 2,0 x 2,9 cm)coffee cup and muffin (approx. 3.4 x 2.5 cm)large coffee mug (approx. 3.2 x 2.6 cm)coffee pot with wreath (approx. 2,4 x 3,1 cm)Reading and drinking coffee (approx. 4,1 x 5,7 cm)small coffee mug (ca. 2,1 x 1,7 cm)small coffee cup (approx. 1,8 x 1,8 cm)coffee mug with heart (approx. 2,5 x 2,9 cm)large coffee pot (approx. 4,7 x 4,3 cm)small branch (approx. 0,6 x 1,0 cm)small flower (approx. 0,5 x 0,7 cm)coffee maker (approx. 3.7 x 5.2 cm)to go mug 1 (approx. 2.9 x 5.2 cm)to go mug 2 (approx. 2.9 x 5.2 cm)to go mug 3 (approx. 2.9 x 5.2 cm)The best results are achieved with the VersaFine Clair stamp pads.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and let yourself be inspired.