Die - Decorate it - Adventsleuchter

Die - Mini Anhänger: With these punches, you can create letters, cards, or boxes. You will receive a set of 4 (ultra) small pendant punches designed to embellish your cards. This way, you can punch out small decorations from color-coordinated paper for your crafting projects. The punched hole allows our 0.3mm thread to be threaded easily, and with a steady hand, the 0.5mm thread will also fit. Mini Circle Pendant: approximately 1.15 cm wide and 1.40 cm high Mini Heart Pendant: approximately 1.18 cm wide and 1.45 cm high Mini Hexagon Pendant: approximately 1.00 cm wide and 1.40 cm high Mini Star Pendant: approximately 1.00 cm wide and 1.30 cm high We have collected many great ideas for this punch on Pinterest and in our creative collection. Take a look and get inspired. The punch works with common die-cutting and embossing machines (DieCut systems). You can use it on cardboard, felt, fabric, and shrink film. To achieve better punching results, separate the two punches before using them. You will find a link to a guide a paragraph further below. Note: This punch is a set of 4 individual punches connected by thin metal tabs. These can be easily separated using wire cutters to obtain the individual punch shapes. Marion has also written a small guide on how to separate the tabs most effectively HERE. Material: 100% steel Made in the USA If you like the "The - Mini Pendants" punches, take a look at our small medallions as well. You can find them HERE. Published on: August 1, 2019

Die - Decorate it - Hängedeko mit SternenA cute Christmas mobilewith hanging baubles and stars.You can use it to add a Christmassy touch to the windowof the coffee mug box, for example.The punch measures approx. 3.5 x 5.1 cm. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 13. December 2024

Die - Waldbewohner - Fuchs SetCute little foxes roam throughthe winter forest:They are very suitable for winterly layouts and cards. The punches have the following sizesFox (approx. 4.4 x 2.9 cm)Fox (approx. 4,9 x 3,0 cm)Fox (approx. 4,0 x 3,5 cm)The punch works with the most common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelWe have collected lots of great ideas for this punch on Pinterest and in our creative collection. Have a look and get inspired.Published on: 13 October 2023

Die - Decorate it - Socken Long socks to decorate the fireplacefor Christmas.The individual punches in this set have the following sizes Sock approx. 1.3 x 5.0 cm Sock approx. 1.1 x 4.0 cm Sock approx. 1.2 x 4.8 cm The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 18. December 2024

"Die - Geo Negativ - Kreis II" With this enchanting Geo negative circle IIyour works will be especially dreamy. The card layer with the punched out geo negative circleyou can so great with colorful paper background.With this punch you get NO punched out part! The punch has a diameter of about 6.5 cm. The punch works with the popular punching and embossing machines (DieCut systems).You can use it for cardboard, felt, fabric, shrink film.Material: 100% steelOn Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and be inspired.Published on: August 01, 2022

Mit unserer "gepierctes Haus vom Nikolaus" Stanze lassen sich Briefe, Karten oder Boxen gestalten. Das besondere bei dieser Stanze ist, das nichts ausgestanzt wird, sondern kleine Punkte in das das Papier gestochen (gepierct) werden. Du erhältst also kein Stanzteil, sondern es entsteht ein Muster auf dem Werkstück. In diesem Fall ergeben die Punkte den Umriss vom "Haus vom Nikolaus". Gepierctes Haus vom Nikolaus ist ca. 3,60 cm hoch und 2,45 cm breit. Wer vermeiden möchte, dass sich der Rand der Stanze mit auf der Papier prägt, der kann beim Stanzen diese Prägematte verwenden. Bei uns hat es super funktioniert. Der Aufbau bei unserer Standard BigShot war wie folgt: Multipurpose Plattform, die Adapterplatten 1 und 2 aufklappen, die Stanzplatte auf die Plattform legen, dann die Stanze mit dem Muster nach oben auf die Stanzplatte legen. Auf die Stanzform das Papierstück, darauf die Prägematte, auf die Matte die nächste Stanzplatte und dann alles zusammen durch die Maschine kurbeln. Bei uns hat sich so der Rand der Stanze nicht mit eingeprägt. Die Pärgematte ist nicht Teil dieses Artikels, sie ist separat erhältlich. Achtung: Die kleinen Punkte zum Piercen des Papiers sind sehr spitz, bitte vorsichtig hantieren. Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Neben der "Gepierctes Haus vom Nikolaus" haben wir noch andere Stanzen in ähnlicher Machart. Diese findet ihr HIER. Veröffentlicht am: 27. September 2019

The "Doppeltes Weihnachten" photopolymer stamp set consists of 6 stamps on a 9.5 cm x 10.5 cm sheet.In this stamp set, the middle word is written large and thick and then it goes up and down in a staggered manner.You will find the following stamps on this stamp set:FROHES FEST: ca. 7,2cm x 3,6cmWEIHNACHTEN: ca. 7,9cm x 3,1cmFROHE: ca. 3,5cm x 0,7cmsmall star: ca. 0,4cm x 0,4cmbig star: ca.0,8cm x 0,8cmstar of 3: approx. 1,0cm x 1,1cmTo use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Have a look and let yourself be inspired.Published on: 01 August 2021

The "Designline - Kleiner Winterwald" photopolymer stamp setconsists of 6 stamps on a large  A7 sheet.A wonderful little stamp set with amagical winter landscape that looks like a snow globe. The stamps have the following sizesWinter landscape (approx. 7.2 x 4.6 cm)Star (diameter approx. 0.7 cm)Star (diameter approx. 1.0 cm)Snowflake (diameter approx. 0.8 cm)Merry Christmas (approx. 5.2 x 1.1 cm)Merry Christmas (approx. 5.0 x 1.3 cm) Steffi from StilfeinDesign_kreativ drew the illustrations for this set for us.To use the stamps, you will need acrylic blocks, which are not included in this offer.We have collected lots of ideas for this stamp set on our Pinterest pinboard and in our creative collection. Take a look and let yourself be inspired.Published on: December 08, 2023

The "Mistelzweige" Photopolymer stamp set consists of 2 stamps on a large A7 sheet. A mistletoe is a symbol of eternal love. Send heartfelt greetings to your loved ones with the mistletoe stamps on a card. The individual stamps have the following sizes: Large mistletoe (approx. 4.9 x 7.6 cm) Small mistletoe (approx. 2.5 x 3.8 cm) To use the stamps, you will need acrylic blocks, which are not included in this offer. We have gathered many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and be inspired. Published on: August 1, 2022

The "Designline - Frohes Fest" photopolymer stamp setconsists of 6 stamps on a large A7 sheet.Beautiful lettering for the Christmas season andfor gift tags also for other celebrations.The individual stamps in this set have the following sizesWunscherfüller (ca. 5,3 x 1,4 cm)Frohes Fest (ca. 5,0 x 1,1 cm)Gutschein (ca. 3,7 x 1,2 cm)Himmliches Feiertage (ca. 7,9 x 1,5 cm)Fröhliche Weihnachten (ca. 8,3 x 1,2 cm)The beautiful stamps are illustrated by dear Andrea Moritz aka Frau Blütenstempel.The best results are achieved with the stamp pads VersaFine Clair.So that the stamps can be used you need acrylic blocks, which are not included in this offer.We've gathered lots of ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: 01 August 2022

Das “Elchgrüße" Photopolymer Stempelset besteht aus 7 Stempeln auf einem A7 Sheet. Besonders auffällig sind die Sprüche, welche einem ein Grinsen aufs Gesicht zaubern. Dazu bekommt ihr 2 niedliche Gesichter, bei denen eines ein Schmunzeln zeigt. Viele Ideen zu diesem Stempelset haben wir in unserer Kreativ-Sammlung zusammengetragen. Schaut doch mal vorbei und lasst Euch inspirieren. Das Set beinhaltet folgende Stempel: Ladebalken: ca. 4,58 x 0,58 cm Weihnachten wird..: ca. 5,74 x 0,38 cm Feiertagsvorfreude wird...: ca. 6,44 x 0,51 cm Wunschzettel wird ...: ca. 5,44 x 0,51 cm Elchpost: ca. 3,65 x 0,96 cm Hirschgesicht natur: ca. 2,35 x 2,35 cm Hirschgesicht schmunzelnd: ca. 2,35 x 2,08 cm Damit die Stempel verwendet werden können benötigt Ihr Acrylblöcke, die nicht mit in diesem Angebot beinhaltet sind. Die hochwertigen Stempel sind darauf selbsthaftend. Um das beste Ergebnis beim Abstempeln zu erzielen, betupft den Stempel mit der Stempelfarbe und drückt diesen dann gleichmäßig mit nicht zuviel Kraft aufs Papier. Sollte die Klebekraft der Stempel durch Staubpartikel oder Fingerabdrücke irgendwann nachlassen, könnt ihr diese einfach mit etwas sanfter Seifenlauge reinigen. Damit erhalten sie ihre Klebekraft zurück. Das Stempelset "Elchgrüße" lässt sich wunderbar mit der Elch-Randstanze kombinieren. Diese findet ihr HIER. Veröffentlicht am: 1. Sep 2017

The "Designline - Weihnachten - Icons II" photopolymer stamp set consists of 12 stamps on a large A7 sheet.These small round motifs are so great icons,that just fit everywhere. They are the eye catchers on your creations. The stamps in this set have the following diametersBranch negative (approx. 1,8 cm)Heart negative (ca. 1,8 cm)Gift negative (ca. 1,8 cm)Christmas tree ball negative (ca. 1,8 cm)Gift (ca. 1,8 cm)cap (ca. 1,8 cm)round gift (ca. 1,8 cm)glove (ca. 1,8 cm)star negative (ca. 1,8 cm)house negative (ca. 1,8 cm)Santa Claus sock negative (ca. 1,8 cm)Christmas tree negative (ca. 1,8 cm)The illustrations for this set are by Sandra Möller of Papier und Passion.The best results with the negative stamps are achieved with the stamp pads VersaFine Clairerzielt.So that the stamps can be used, you need acrylic blocks, which are not included in this offer.We've gathered lots of ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.In addition to the stamp set - Designline - Weihnachten - Icons II, we have other sets designed by artists. You can find them under the heading "Designline".Published on: 07 October 2022

Die - Decorate it - Kamindeko - Häuser Cute little houses that can be wonderfullylined up on the fireplace.The individual punches in this set have the following sizes House approx. 1.3 x 2.6 cm House approx. 1.1 x 2.1 cm House approx. 0.9 x 2.5 cm House approx. 1.5 x 2.0 cm The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and get inspired. Published on: 18. December 2024

Die - Decorate it - Kamin - Girlanden Colourful garlands that light up the fireplaceadd a lot of cosiness to your living room.The individual punches in this set have the following sizes Garland length approx. 9.6 cm Garland length approx. 9.6 cm The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and get inspired. Published on: 18. December 2024

🏠 Bakery box - lovingly designed mini house for crafting and giving as a gift 🍞 A touch of nostalgia The bakery box is a charming house-shaped die-cutter - with intricate details such as windows, a door and decorative elements. The design is reminiscent of a small village bakery and can be wonderfully integrated into winter landscapes, decorative villages or gift sets. Ideal for craft sessions with children, creative decoration enthusiasts or DIY fans. 🎁 Versatile in use 🍪 Gift packaging: perfect for biscuits, small baked goods or sweet surprises 🎄 Christmas decoration: as part of a mini Christmas village or Advent arrangements 🕯️ Table decorations: lovingly designed as place cards or gifts for guests 🌸 All year round: also beautiful as a spring or Easter house with pastel-coloured paper The individual punches have the following sizesBase (approx. 13.0 x 11.0 cm)Front (approx. 13.0 x 16.7 cm)Side (approx. 13.0 x 15.1 cm)Back (approx. 13.0 x 13.3 cm)Lid (approx. 13.0 x 13.9 cm)The finished closed box has a size of approx. 13.0 x 11.0 x 12.4 cm The punch is made of 100% steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 05 December 2025

Die - Decorate it - GirlandenDecorate your Advent houses or other house boxes with beautifulgarlands and make them look enchanted.The die-cuts have the following sizesGarland 1 (approx. 7.0 x 2.3 cm)Garland 2 (approx. 5.3 x 4.6 cm)Garland 3 (approx. 3.0 x 1.2 cm)Garland 4 (approx. 8.0 x 1.0 cm)Garland 5 (approx. 7.0 x 1.3 cm)Garland 6 (approx. 7.0 x 1.0 cm)Garland 7 (approx. 9.5 x 5.0 cm) The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film.  Material: 100 % steel On Pinterest and in our creative collection we have collected lots of great ideas for this punch. Take a look and let yourself be inspired. Published on: 29. November 2023

Die - Decorate it - Socken Long socks to decorate the fireplacefor Christmas.The individual punches in this set have the following sizes Sock approx. 1.3 x 5.0 cm Sock approx. 1.1 x 4.0 cm Sock approx. 1.2 x 4.8 cm The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 18. December 2024