Die - Kranzbausatz mit Häuschen

Using the die ‘Pop-Up Card – House with a Heart’ you can create a special card where, when opened, a charming house pops up in 3D. The little windows and the heart in the roof add lovely touches. Depending on how you design it, the card is perfect for a housewarming, wedding, birthday, Christmas or simply to send a warm greeting.💡 Tip: Line the windows with tracing paper or coloured cardstock. A few subtle touches of light and some personalised lettering will make the pop-up house a real eye-catcher. The die-cut measures approx. 10.0 x 14.0 cmThe idea for this die comes from the lovely Stephie Kasper, also known as Papierschorsch. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 23 October 2026

The "Polar Grüße" Photopolymer stamp set consists of 16 stamps on a large A6 sheet. The two cute polar bears send you cuddly greetings from the polar.You will find the following stamps on this stamp set:Snowflake sky: approx. 9.3cm x 3.5cm1st snowflake: ca. 0,3cm x 0,3cm2nd snowflake: ca. 1,8cm x 1,5cm3rd snowflake: approx. 1,4cm x 1,5cm4th snowflake: approx. 0,8cm x 0,9cm5th snowflake: ca. 0,9cm x 1,0cm6th snowflake: ca. 0,5cm x 0,5cm7th snowflake: ca. 0,8cm x 0,8cm8. snowflake: ca. 1,2cm x 1,0cmpolar bears: ca. 7,4cm x 5,9cm- KUSCHELIGE- SCHNEEFLOCKIGE- WEIHNACHTSZEIT- WINTERZEIT- BRRR!- VERSCHNEITETo use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: 01 August 2021

Ein Stanzen Duo, mit einer Schrift in 2 Varianten. Zum einen die Worte Frohe Weihnachten in der gepunkteten Schrift ist mit den Pop up Sternen, als ein wundervoller Hingucker auf jeder Weihnachtskarte. Dazu noch die Worte Frohe Weihnachten in der gepunkteten Schrift, ohne ein zusätzliches Element, ein schönes Element für schlichte und elegante Karten. Das besondere bei dieser Stanze ist, das nichts ausgestanzt wird, sondern kleine Punkte in das das Papier gestochen (gepierct) werden. Du erhältst also kein Stanzteil, sondern es entsteht ein Muster auf dem Werkstück. In diesem Fall werden die Worte Frohe Weihnachten ins Papier gestochen. Achtung: Diese Stanze passt nur der länge nach durch die Standard BigShot. Bitte unbedingt die Größe beachten. Das Wort mit den Pop Up Sternen ist ca. 16,41 cm lang und 2,23 cm hoch Das Wort ohne zusätzliches Element ist ca. 16,92 cm lang und 1,14 cm hoch Hilfe zur Verwendung: Wer vermeiden möchte, dass sich der Rand der Stanze mit auf der Papier prägt, der kann beim Stanzen diese Prägematte verwenden. Bei uns hat es super funktioniert. Der Aufbau bei unserer Standard BigShot war wie folgt: Multipurpose Plattform, die Adapterplatten 1 und 2 aufklappen, die Stanzplatte auf die Plattform legen, dann die Stanze mit dem Muster nach oben auf die Stanzplatte legen. Auf die Stanzform das Papierstück, darauf die Prägematte, auf die Matte die nächste Stanzplatte und dann alles zusammen durch die Maschine kurbeln. Bei uns hat sich so der Rand der Stanze nicht mit eingeprägt. Die Pärgematte ist nicht Teil dieses Artikels, sie ist separat erhältlich. Achtung: Die kleinen Punkte zum Piercen des Papiers sind sehr spitz, bitte vorsichtig hantieren. Achtung: Diese Stanze ist ein Set aus 2 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend. Inspirationen findet ihr auf Pinterest und in unserer Kreativsammlung. Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Neben der "gepunktet zur Hochzeit" haben wir noch andere Stanzen in ähnlicher Machart im Shop. Diese findet ihr HIER. Veröffentlicht am: 01. August 2020

Die - Tanne mit Schneemann - Ist eine Negativstanze. Die Stanzung schneidet das Papier raus und hinterlässt eine Tannenform in der ein kleines Kind und ein Schneemann zu sehen sind. Ihr erhaltet kein ausgestanztes Motiv, sondern eine Stanzung im Negativ. Schneeflockenherz - negativ - groß ist ca. 5,75 cm hoch und ca. 4,69 cm breit In unserer Kreativsammlung und auf Pinterest haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Mögt ihr unsere Stanze "Tanne mit Schneemann" aber wünscht euch ein anderes Design? Dann schaut euch mal DIESE Stanzen an. Veröffentlicht am: 01. August 2020

⭐🎁 ‘Star Ornaments Box’ die – small gift packaging with a big impact With the ‘Star Ornaments Box’ die, you can create extraordinary gift packaging in the shape of a star ornament in no time at all. Whether as a thoughtful gift, an Advent calendar, a place card or a Christmas tree decoration – this box turns small gifts into something truly special. Thanks to the built-in hanger, the finished box can be hung decoratively on the Christmas tree, on presents or on an Advent calendar, becoming a festive eye-catcher in its own right. ✨ What makes this die-cut special : ⭐ Original gift box in the shape of a star pendant 🎀 With built-in hanger for decorating and gift-giving ✂️ Precise die-cut results for easy assembly 🎨 Plenty of space for stamping, decorating and personalising 🌿 Highlights : Perfect for little surprises and monetary gifts Ideal as Christmas tree decorations or Advent calendar tags Versatile for Christmas, winter and other festive occasions Combines beautifully with Christmas stamps, tags and decorative elements 💡 Perfect for : Small gift boxes 🎁 Advent calendars ⭐ Cash gifts 💌 Christmas tree decorations 🎄 Table decorations ✨ Small gifts 💝 👉 Tip : Decorate the star-shaped box with festive stamp designs, bows, tags or glitter paper. Adding numbers for an Advent calendar or a personal message also turns each box into a lovely, one-of-a-kind creation. A creative packaging idea with a special charm – festive, versatile and perfect for little surprises that come from the heart ⭐🎁🎄✨💛 The die measures approx. 24.9 x 14.0 cm.The finished box measures approx. 12.0 x 11.0 x 3.7 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines when used with long cutting mats (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 1 August 2026

With the Small Basic Set , you can create the basic shape of a three-dimensional little house, as well as a matching front façade complete with windows and a chimney. This allows you to create enchanting little houses for decorations, gift ideas and personalised miniature worlds. The set can be combined in many different ways with the matching add-ons from the ‘Papierschorsch’s House World – Small’ .💡 Tip: Line the windows with tracing paper and illuminate the finished little house with a small LED light to create a cosy atmosphere. The individual die-cuts have the following dimensions:Base & side (approx. 18.2 x 6.9 cm)Front of house (approx. 5.5 x 10.0 cm)The finished little house measures approx. 5.5 x 5.5 x 10.0 cmThe idea for this die-cut set comes from the lovely Stephie, also known as Papierschorsch. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front 3 – Small’ complements the ‘Papierschorsch’s World of Houses – Basic Set – Small’ with an elegant façade featuring a curved gable, straight-lined windows and a decorative star. The distinctive shape adds variety to your rows of little houses and is perfect for festive decorations and lovely gift wrapping.💡 Tip: Place metallic or glitter paper behind the star to make it a sparkling centrepiece of your house front. The die measures approx. 5.5 x 10.2 cm.The idea for this die-cut series comes from the lovely Stephie, aka Papierschorsch.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co).It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid.📌 Looking for inspiration?We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front 4 – Small’ complements the ‘Papierschorsch’s World of Houses – Basic Set – Small’ with a simple house front featuring a sloping roof, two windows and a charming heart. The timeless design is ideal for small gift boxes, decorations and personalised house scenes for a wide range of occasions.💡 Tip: Create the roof area using patterned paper or give it a special texture using an embossing die. The die measures approx. 6.3 x 9.8 cm. The idea for this die-cut series comes from the lovely Stephie, aka Papierschorsch.  The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front 2 – Small’ complements the “Papierschorsch’s World of Houses – Basic Set – Small” with a striking façade featuring a classic stepped gable and four arched windows. This allows you to create a variety of paper houses for small gift wrappings, decorations and customised rows of houses.💡 Tip: Die-cut the house front from patterned paper with a brick or stone effect and line the windows with a contrasting colour. The die measures approx. 5.5 x 10.4 cmThe idea for this die-cut series came from the lovely Stephie, aka Papierschorsch The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co).It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 19 October 2026

With the dies ‘Stephie’s Houses II’ you can create beautiful, intricately detailed townhouses that are perfect for your cards, gift wrapping or winter decorations . The charming houses with curved gables and little heart and window details bring your craft projects to life – whether on their own, as a row of houses or combined with other sets. These dies are incredibly versatile and go perfectly with seasonal themes such as Christmas, spring or city motifs. 💡 Tip Combine ‘Stephie’s Houses II’ with ‘Stephie’s Houses III’ or other house dies to create an entire neighbourhood – particularly lovely with tracing paper and LED lights. The dies are the following sizes:small house (approx. 1.3 x 2.3 cm)medium house (approx. 1.9 x 3.3 cm)large little house (approx. 2.8 x 4.8 cm)The idea for these dies comes from Stephanie Kasper, also known as Papierschorsch.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it is suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 19 October 2026

The add-on ‘House Front 1 – Small’ complements the “Papierschorsch’s World of Houses – Basic Set – Small” with a charming façade featuring a classic pointed gable, six arched windows and a small heart. You can use this to create your own unique paper houses for decorations, small gift wrappings and atmospheric miniature worlds.💡 Tip: Line the heart and individual windows with different coloured paper to give the house front a lively and personalised look. The die measures approx. 5.5 x 10.0 cmThe idea for this die-cut series comes from the lovely Stephie, aka Papierschorsch.  The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 19 October 2026

Using the die-cut ‘Papierschorsch’s World of Houses – Inner Box – Small’ you can create a matching box for the little houses in the series. Combined with the “Papierschorsch’s World of Houses – Basic Set – Small” , your paper house will become a lovely gift box for little surprises, sweets or monetary gifts.💡 Tip: Die-cut the inner box from sturdy cardstock and the house front from decorative paper – this creates a lovely contrast and gives the little house extra stability. The individual dies have the following dimensions:Base (approx. 7.0 x 7.0 cm)House inner box (approx. 11.3 x 11.3 cm)The finished inner box measures approx. 5.3 x 5.3 x 9.3 cmThe idea for this die-cut set comes from the lovely Stephie, aka Papierschorsch. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 19 October 2026

🏘️ With the "Layer houses for standard tags" die-cutter, you can conjure up beautiful, wintry and urban motifs on your gift tags in no time at all! This filigree punch set is perfect for giving your tags, cards or packaging a special depth and atmosphere - ideal for the Christmas season, housewarming or loving greetings in between. ✂️ Design & contents The set contains two detailed layer punches that are perfectly matched to standard tag sizes Basic-038: Two variations of house silhouettes with distinctive gables, windows and small heart details Fine lines for precise cuts and an elegant cityscape Coordinated layer shapes - ideal for layering for added dimension and contrast Compatible with standard tag punches - Basic 038 - can be perfectly combined and extended The design is reminiscent of a small old town or a wintry village - ideal for atmospheric paper projects with a heart 💡 Possible applications Gift tags: as a beautiful layer over coloured or glittery background papers Cards & packaging: as a foreground motif on Christmas cards or gift boxes Decorative element: for Advent calendars, mini houses or light projects Scrapbooking: as a delicate detail on wintry or urban page layouts Combine different colours and types of paper to create a new, individual cottage motif every time. ❤️ Special features Detailed cottage motifs with charming heart and window details Perfect for Christmas, winter, housewarming or atmospheric stationery projects Can be combined with the basic pendant punch or other layer designs Easy to use - for crafting beginners and professionals alike ✨ Tip: Punch the house motifs out of white card and place them on a dark or glittery background - this creates a dreamy winter village in miniature format that will be an eye-catcher on any gift!The punches have the following size: Attachment (approx. 6.5 x 11.1 cm)Attachment (approx. 6.5 x 11.1 cm) The punch is made of 100% steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 28. November 2025

Die - Doodle Tannenwald 🌲❄️🎄🖌️ A magical set with 9 different fir trees - drawn in a lovely doodle style. Perfect for creating a beautiful fir forest for your Christmas or winter projects. 🎄Variety of tree shapes for individual scenes 🖌️Doodle style - charming & playful ❄️Ideal for cards, packaging & layouts 🎁Can be combined with houses, animals & snowy landscapes Bring a wintry, magical atmosphere to your craft projects with these cute fir trees!The individual punches in this set have the following sizesFir tree (approx. 1.1 x 3.1 cm)Fir tree (approx. 1.1 x 3.0 cm)Fir tree (approx. 1.8 x 4.2 cm)Fir tree (approx. 2.0 x 2.3 cm)Fir tree (approx. 3.1 x 6.3 cm)Fir tree (approx. 2.6 x 4.4 cm)Fir (approx. 2.0 x 2.4 cm)Fir (approx. 2.1 x 3.6 cm)Fir (approx. 1.6 x 2.8 cm) The die-cutter works with all standard die-cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 01 August 2025

Enamel Dots - Vintage HellblauThree different motifs glossy in different sizeson a 10.5 x 14.7 cm sheet.Great, three-dimensional, self-adhesive motifs for designingDesign your cards, packaging, layouts etc.There are 160 enamel dots in a set.Please remember that colours may differ from the original as the display may vary depending on the screen settings.For more inspiration visit our design team again.Published on: 08 August 2024

The ‘Mushrooms – Double-sided’ sheet of designer paper measures 30.5 x 30.5 cm, has a weight of 200 g/m² and a matt finish. We use our high-quality design paper for creating greeting cards, for scrapbooking and for making boxes. We recommend this high-quality paper as it produces neat folded corners and edges after folding. We hope you enjoy using this lovely paper.Please note: Due to its size, the paper can only be dispatched as a parcel. This paper is non-returnable!You can find inspiration on Pinterest and in our creative collection. Do have a look and be inspired.Please bear in mind that colours may differ slightly from the original, as the display can vary depending on your screen settings.Published on: 18 September 2026

Cut & Emboss Folder - Anhänger mit Streifen - Xmas - 11 x 15.5 cmWith this great Cut & Emboss Folder you can punch out three different tags with embossed patterns and all in one step. Please place the folder CROSS into the die-cutting and embossing machine and crankit through and it will emboss and die-cut at the same time. The individual tags are approx. 4.5 x 8.3 cm in size.The folder works with all standard die-cutting and embossing machines (DieCut systems).For more inspiration, visit our design team. Published on: 17. November 2023