Die - Riesengroßer Christbaumanhänger II

Unser "Im Rahmen - Weihnachten" Photopolymer Stempelset besteht aus 9 Stempeln auf einem A6 Sheet. Eingerahmte Weihnachtsgrüße für eure kreativen Projekte. Egal ob ihr einen Geschenkanhänger oder eine Grußkarte gestalten möchtet, dieses Set bietet euch viele Möglichkeiten. Viele Inspirationen mit diesem Stempelset sammeln wir auf unserer Pinterest Pinnwand und auf unserer Kreativ-Sammlung. Schaut doch mal vorbei und lasst euch inspirieren. Das Set beinhaltet folgende Stempel: Schöne Festtage: ca. 4,90 x 1,87 cm Frohe Weihnachten: ca. 5,07 x 2,09 cm Schöne Weihnachten mit Zweig: ca. 6,07 x 4,06 cm Herz: ca. 0,98 x 0,67 cm glückliche Weihnachten: ca. 2,13 x 0,95 cm Friedliche Weihnachtszeit: ca. 5,43 x 2,80 cm fröhliche Weihnachten: ca. 6,79 x 3,23 cm Frohes Fest: ca. 4,96 x 3,25 cm mini Herz: ca. 0,23 x 0,16 cm Damit die Stempel verwendet werden können benötigt Ihr Acrylblöcke, die nicht mit in diesem Angebot beinhaltet sind. Die hochwertigen Stempel sind darauf selbsthaftend. Um das beste Ergebnis beim Abstempeln zu erzielen, betupft den Stempel mit der Stempelfarbe und drückt diesen dann gleichmäßig mit nicht zuviel Kraft aufs Papier. Sollte die Klebekraft der Stempel durch Staubpartikel oder Fingerabdrücke irgendwann nachlassen, könnt ihr diese einfach mit etwas sanfter Seifenlauge reinigen. Damit erhalten sie ihre Klebekraft zurück. Neben dem Stempelset "Im Rahmen - Weihnachten" haben wir noch viele weitere weihnachtliche Sets im Shop. Diese findet ihr HIER. Veröffentlicht am: 01. August 2019

Die - Stand-PillowboxA magical packagingwith lots of space for little things.The punch has a size of approx. 14.8 x 16.5 cmThe finished box has a size of approx. cm The punch works with the common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 09 August 2023

Die - Milchkarton - quadratischA great punch for a package in which gifts can be lovingly packaged.Closing the box is very easywith our paper clips. The punch has a size of approx. 14.9 x 16.2 cm.The finished milk carton has a size of approx. 7.0 x 7.0 x 10.5 cm. The punch works with standard punching and embossing machines (DieCut systems).You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 02 December 2022

"Die - Mini Anhänger - Zahlen: With these dies, you can create designs on letters, cards, or boxes. You will receive a set of 10 (ultra) small pendant dies, intended for embellishing your cards. This allows you to cut out small decorations from color-matching paper for your crafts. The pre-cut hole allows our 0.3mm thread to be easily threaded, and with a steady hand, the 0.5mm thread can also fit through. Mini Pendant 1: Approximately 0.55cm wide and 1.47cm high Mini Pendant 2: Approximately 0.85cm wide and 1.48cm high Mini Pendant 3: Approximately 0.89cm wide and 1.52cm high Mini Pendant 4: Approximately 0.91cm wide and 1.46cm high Mini Pendant 5: Approximately 0.85cm wide and 1.50cm high Mini Pendant 6: Approximately 0.89cm wide and 1.50cm high Mini Pendant 7: Approximately 0.89cm wide and 1.50cm high Mini Pendant 8: Approximately 0.87cm wide and 1.50cm high Mini Pendant 9: Approximately 0.89cm wide and 1.48cm high Mini Pendant 0: Approximately 0.88cm wide and 1.51cm high The die works with standard die-cutting and embossing machines (DieCut systems). You can use it with cardboard, felt, fabric, and shrink film. You can find inspiration on Pinterest and in our creative collection. To achieve better punching results, separate the dies before use. You will find a link to a guide on how to do this one paragraph below. Attention: This die is a set of 10 individual dies connected by fine metal bridges. These bridges can be easily separated with a side cutter to obtain the individual die shapes. Marion has also written a small guide on how to separate the bridges most effectively. Material: 100% steel Made in the USA If you like the 'Mini Pendants - Numbers' dies, take a look at our small medallions as well. You can find them HERE. Published on: March 13, 2020."

The mini pendants luck: the 4 small luck pendants with a maximum height of 16 mm are perfect little eye-catchers on cards and on boxes. Soon you will also find examples from our design team. In our creative collection and on Pinterest we have collected many great ideas for this punch. Take a look and let yourself be inspired. For a better punching result, separate the two punches from the use. You can find the link to instructions on how to do this one paragraph below. Note: This punch is a set of several individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual die cuts. Marion also wrote a little tutorial HERE on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100% steel Made in USA Published on: 10. March 2021