Skip to main content Skip to search Skip to main navigation

Product information "Die - Mini Anhänger - Zahlen"

"Die - Mini Anhänger - Zahlen: With these dies, you can create designs on letters, cards, or boxes. You will receive a set of 10 (ultra) small pendant dies, intended for embellishing your cards. This allows you to cut out small decorations from color-matching paper for your crafts. The pre-cut hole allows our 0.3mm thread to be easily threaded, and with a steady hand, the 0.5mm thread can also fit through.

Mini Pendant 1: Approximately 0.55cm wide and 1.47cm high

Mini Pendant 2: Approximately 0.85cm wide and 1.48cm high

Mini Pendant 3: Approximately 0.89cm wide and 1.52cm high

Mini Pendant 4: Approximately 0.91cm wide and 1.46cm high

Mini Pendant 5: Approximately 0.85cm wide and 1.50cm high

Mini Pendant 6: Approximately 0.89cm wide and 1.50cm high

Mini Pendant 7: Approximately 0.89cm wide and 1.50cm high

Mini Pendant 8: Approximately 0.87cm wide and 1.50cm high

Mini Pendant 9: Approximately 0.89cm wide and 1.48cm high

Mini Pendant 0: Approximately 0.88cm wide and 1.51cm high

The die works with standard die-cutting and embossing machines (DieCut systems). You can use it with cardboard, felt, fabric, and shrink film.

You can find inspiration on Pinterest and in our creative collection.

To achieve better punching results, separate the dies before use. You will find a link to a guide on how to do this one paragraph below.

Attention: This die is a set of 10 individual dies connected by fine metal bridges. These bridges can be easily separated with a side cutter to obtain the individual die shapes. Marion has also written a small guide on how to separate the bridges most effectively.

Material: 100% steel Made in the USA

If you like the 'Mini Pendants - Numbers' dies, take a look at our small medallions as well. You can find them HERE.

Published on: March 13, 2020."

Please enter a valid email address.
Please enter a valid question.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Mehr Alphabete & Zahlen

Stamp set - Heikes Welt - Zahlen und Co
Stamp set - Heikes Welt - Zahlen und Co

🔢 A colourful set full of possibilities - with numbers, symbols and small highlights for your very personal projects. Whether for birthdays, advent calendars, scrapbooking or children's birthdays - the varied number stamps can be wonderfully combined and creatively staged. 🎁 Included in the set: - numbers 0-9 in different, lovingly designed fonts - playful gift packages & bows - a curious squirrel 🐿️ - a pylon with a wink & a flying plastera flying plaster 🩹 ✨ perfect for: - children's cards, birthday numbers & invitations - advent calendars & small gifts - creative journaling or decorating ideas A set that is fun - with charm, character & many uses. 🎨🖋️ The individual stamps in this set have the following sizes: 0 (approx. 1.1 x 1.4 cm)1 (approx. 0.6 x 1.3 cm)2 (approx. 1.0 x 1.3 cm)3 (approx. 1.0 x 1.4 cm)4 (approx. 1.0 x 1.3 cm)5 (approx. 1.0 x 1.4 cm)6 (approx. 1.0 x 1.4 cm)7 (approx. 1.0 x 1.4 cm)8 (approx. 1.1 x 1.4 cm)9 (approx. 1.0 x 1.4 cm)Gift (approx. 1.6 x 1.5 cm)Gift (approx. 1.3 x 1.3 cm)Ice cream cone (approx. 1.6 x 3.6 cm)Squirrel (approx. 4.0 x 4.5 cm)Gift (approx. 1.8 x 1.9 cm) The punch is made of 100% steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 26. September 2025

Regular price: €6.90
New
Stempelset - Kleine runde Zahlen & Co.
Stempelset - Kleine runde Zahlen & Co.

Mit dem Stempelset „Kleine runde Zahlen & Co.“ bekommst du eine vielseitige Mischung aus Zahlen, Zeichen und kleinen Symbolen im charmanten runden Design. Neben den Zahlen findest du unter anderem Herz, Stern, Krone, Kleeblatt, Briefumschlag, Tannenbaum sowie verschiedene fröhliche Gesichter. Perfekt für kleine Akzente, Nummerierungen, Adventskalender, Anhänger und viele weitere kreative Projekte. 💡 Tipp: Nutze die Zahlen für Adventskalender, Geburtstage oder kleine Nummerierungen und kombiniere sie mit dem beliebtem Stempelset "Kleines rundes ABC" und der passenden Outline Stanze "Kleines rundes ABC-Outline".Die unterschiedlichen Gesichter eignen sich außerdem wunderbar, um Karten, Tags und kleinen Botschaften im Handumdrehen einen fröhlichen Charakter zu verleihen.Der Stempel hat eine Größe von ca. 9,5 x 5,9 cmDie Kreise haben einen Durchmesser von ca. 1,3 cmDie Illustrationen für dieses Set stammen von der lieben Andrea aka Frau Blütenstempel.  ✅ Produktdetails: • Photopolymer-Stempelset auf A7 Sheet • Präzise Linienführung & klare Abdruckqualität • Vielseitig einsetzbar für Karten, Verpackungen, Planer & mehr • Ideal kombinierbar mit anderen Sets aus unserer Kollektion Für besonders schöne Ergebnisse empfehlen wir die Verwendung der VersaFine Clair Stempelkissen. Damit du sofort loslegen kannst, denk bitte daran: Zur Anwendung benötigst du einen passenden Acrylblock – dieser ist nicht im Lieferumfang enthalten. 💡 Inspiration gesucht? Schau gerne bei unserem [Designteam] vorbei oder lass dich durch unsere [Kreativsammlung] und [Pinterest-Pinnwand] treiben – dort findest du viele tolle Beispiele & Ideen rund um dieses Stempelset. 💕 📅 Veröffentlicht am: 18. September 2026

Regular price: €6.90
Stempelset - Schmale Zahlen
Stempelset - Schmale Zahlen

🔢 The stamp set is perfect for anyone who loves clear, modern and handwritten-looking numbers. These delicate, elegant numbers can be used to personalise projects - simple, stylish and versatile. 💡 Possible uses The numbers can be combined in a variety of ways and are perfect for: Birthday cards and anniversaries Advent calendar Date stamps in bullet journals or planners Numbering in mini albums Countdown projects and DIY decorations ❤️ Delicate, modern design with a clear design language Ideal for combining with script stamps or symbols Easy positioning thanks to transparent design Perfect for creative projects with a personal touch The individual numbers are approx. 3.8 cm high.The idea for these stamps comes from Andrea Moritz aka Frau Blütenstempel. ✅ Product details: - Photopolymer stamp set on P6 sheet (10.5 x 10.5) - Precise lines & clear imprint quality - Versatile use for cards, packaging, planners & more - Can be ideally combined with other sets from our collection For particularly beautiful results, we recommend using the VersaFine Clair ink pads. So that you can get started right away, please remember: You will need a matching acrylic block for use - this is not included. 💡 Looking for inspiration? Take a look at our [design team] or browse through our [creative collection] and [Pinterest board] - you'll find lots of great examples and ideas for this stamp set. 💕 📅 Published on: 21. November 2025

Regular price: €10.95
Die - 3D Zero
Die - 3D Zero

With the ‘3D Zero’ die-cut, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D zero, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies have the following dimensions:Zero – Full-surface (approx. 4.0 x 5.7 cm)Zero – Frame (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm)Outer border (approx. 17.7 x 2.1 cm)Inner border (approx. 8.0 x 2.1 cm)The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

Regular price: €12.95
Die - 3D Two
Die - 3D Two

With the ‘3D Two’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D ‘2’, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Line the numbers with tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:. Two full-surface dies (approx. 4.0 x 5.7 cm each). Two frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm). Outer border (approx. 16.4 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional shim or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

Regular price: €12.95
Die - 3D Five
Die - 3D Five

With the ‘3D Five’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D five, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Line the numbers with tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:: Five solid dies (each approx. 4.0 x 5.7 cm), five frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 16.4 x 2.1 cm & 14.3 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do take a look and be inspired! 📅 Published on: 16 September 2026

Regular price: €12.95
Die - 3D Screens
Die - 3D Screens

With the ‘3D Seven’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D seven, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Place the numbers on tracing paper or acetate film and fill them with shaker elements for a cool effect. Using patterned paper, metallic cardstock or small decorative elements, you can design the numbers to suit the occasion. The individual dies are the following sizes:: Seven solid panels (approx. 4.0 x 5.7 cm each), seven frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 12.9 x 2.1 cm & 10.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not take a look and get inspired! 📅 Published on: 16 September 2026

Regular price: €12.95
Die - Schmale Ziffern - Klein
Die - Schmale Ziffern - Klein

Die - Schmale Ziffern - KleinA great 15-piece punch set withlarge narrow numbers and special characters.The punches are perfect for layouts or for cards for special birthdays.The punches have a height of about 3.5 cm.The punch works with the most popular die cutting and embossing machines (DieCut systems). You can use them for cardboard, felt, fabric, shrink wrap.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 11. August 2023

Regular price: €12.95
Die - 3D One
Die - 3D One

With the ‘3D One’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D ‘1’, offering you brilliant design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip : Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are the following sizes: One solid (approx. 2.6 x 5.7 cm each) One frame (approx. 2.6 x 5.7 cm) (frame thickness approx. 0.3 cm) Outer border (approx. 18.2 x 2.1 cm) The finished 3D number measures approx. 2.6 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things, : ✔️ card ✔️ felt ✔️ fabric ✔️ shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

Regular price: €12.95
Die - 3D Three
Die - 3D Three

With the ‘3D Three’ die-cut, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D Three, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly attractive when decorated. 💡 Tip : Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies are as follows:: three solid shapes (approx. 4.0 x 5.7 cm), three frames (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm) and outer borders (approx. 14.0 x 2.1 cm & 13.5 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

Regular price: €12.95
Die - 3D Four
Die - 3D Four

With the ‘3D Four’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D four, offering you fantastic design possibilities for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies have the following dimensions:: Four full-surface dies (approx. 4.0 x 5.7 cm each), four frame dies (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm), outer border (approx. 20.0 x 2.1 cm) Inner border (approx. 2.6 x 2.1 cm). The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 16 September 2026

Regular price: €12.95
Die - 3D Six & Nine
Die - 3D Six & Nine

With the ‘3D Six & Nine’ die, you can create a three-dimensional number that will turn your creative projects into real eye-catchers. The individual die-cut pieces are assembled to form a sturdy 3D six or nine, offering you fantastic design options for birthdays, anniversaries, years or special milestones. Thanks to its clean lines, the number looks both modern and simple, yet is particularly beautiful when decorated. 💡 Tip: Place the numbers on a sheet of tracing paper or acetate and fill them with shaker elements for a cool effect. You can design the numbers to suit the occasion using patterned paper, metallic cardstock or small decorative elements. The individual dies have the following dimensions:: Six/Nine solid (approx. 4.0 x 5.7 cm each); Six/Nine frame (approx. 4.0 x 5.7 cm) (frame thickness approx. 0.3 cm); outer border (approx. 13.5 x 2.1 cm & 10.0 x 2.1 cm) Inner border (approx. 3.9 x 2.1 cm) The finished 3D number measures approx. 4.0 x 5.7 x 1.5 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ Card ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 16 September 2026

Regular price: €12.95
Skip product gallery

Other crafters also bought

Die - Mini Anhänger Glück
Die - Mini Anhänger Glück

The mini pendants luck: the 4 small luck pendants with a maximum height of 16 mm are perfect little eye-catchers on cards and on boxes. Soon you will also find examples from our design team. In our creative collection and on Pinterest we have collected many great ideas for this punch. Take a look and let yourself be inspired. For a better punching result, separate the two punches from the use. You can find the link to instructions on how to do this one paragraph below. Note: This punch is a set of several individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual die cuts. Marion also wrote a little tutorial HERE on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100% steel Made in USA Published on: 10. March 2021

Regular price: €7.95
Die - Schmale Ziffern - Klein
Die - Schmale Ziffern - Klein

Die - Schmale Ziffern - KleinA great 15-piece punch set withlarge narrow numbers and special characters.The punches are perfect for layouts or for cards for special birthdays.The punches have a height of about 3.5 cm.The punch works with the most popular die cutting and embossing machines (DieCut systems). You can use them for cardboard, felt, fabric, shrink wrap.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 11. August 2023

Regular price: €12.95
Die - Stand-Pillowbox
Die - Stand-Pillowbox

Die - Stand-PillowboxA magical packagingwith lots of space for little things.The punch has a size of approx. 14.8 x 16.5 cmThe finished box has a size of approx. cm The punch works with the common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 09 August 2023

Regular price: €29.95
Die - Fotostreifen Set - groß
Die - Fotostreifen Set - groß

Die - Fotostreifen Set - groß With this great punch set canyour vacation pictures on layoutsperfectly set in scene.The punches have a size of about 18.4 x 4.2 cm  The punch works with standard punching and embossing machines (DieCut systems). You can use them for cardboard, felt, fabric, shrink wrap.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 14. April 2023

Regular price: €18.95