Die - Meeresbewohner Set

A great 4-piece punch set for the maritime summer, shells are just part of it. Who does not know the great vacation pictures of the coast with collected shells? With this punch set, such images can be quite wonderfully set in scene on layouts. The punches have the following sizes Shell 1 (approx. 4.7 x 1.3 cm) Shell 2 (approx. 2.4 x 3.0 cm) Shell 3 (approx. 3.0 x 3.0 cm) Shell 4 (approx. 4.1 x 1.9 cm) For a better punching result please separate the punches before use. You will find the link to a tutorial one paragraph below. Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies.  HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common punching and embossing machines (DieCut systems).You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelMade in USA On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 15. July 2022

Die - Designline - Fröhliches Oktopus Set 🐙⚓🌞💙 Add some good humour to your projects with this cute die-cut set! Three cute octopuses in different sizes frolic happily through the water - with matching little sailor hats for extra maritime charm. Perfect for summery cards, cheerful layouts or wrapped greetings with a seaside flair. 🐙 3 octopuses in different sizes ⚓ With matching sailor hats 🌞 Guaranteed good vibes for summer projects 🎨 Ideal for cards, packaging & layouts 💙 Can be combined with seaweed, waves or boats A playful set that will make your crafting world smile!The individual punches have the following sizesOctopus (approx. 3.6 x 3.3 cm)Octopus (approx. 5.7 x 5.5 cm)Octopus (approx. 8.4 x 8.0 cm)Cap (approx. 0.6 x 0.6 cm)Cap (approx. 1.1 x 1.0 cm)Cap (approx. 1.6 x 1.4 cm) The punch is made of 100 % steel and fits all standard punching and embossing machines (e.g. Big Shot & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 18. July 2025

Die - Designline - Großer SeeigelA beautiful sea urchin foryour layout from the last vacationat the sea. The punches have the following sizesbackground (approx. 8.4 x 7.9 cm)overlay (approx. 7.6 x 7.1 cm) The idea for this punch set comes from the lovely Anni from  Flebbeart. The punch works with the common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 18. August 2023

🐋⚓🧢🧣🌊 Two beautiful whales in a boatman look in different sizes bring maritime charm to your craft world. Included: a cool hat and a scarf, perfect for decorating for a stylish sailor look! The fine embossing gives the whales structure and lightness. 🐋2 whales in different sizes 🧢With boatswain's cap & scarf ⚓Perfect for maritime projects & sailor greeting cards 🌊Fine details thanks to embossing 🎁Ideal for packaging, cards & decorations Whether as a small greeting from the sea or a fun eye-catcher on layouts - these whales are ready to go! ⛵💙The individual punches have the following sizesWhale (approx. 9.3 x 5.7 cm)Whale (approx. 6.0 x 3.3 cm)Hat (approx. 2.3 x 1.6 cm)Hat (approx. 1.5 x 1.0 cm)Scarf (approx. 2.4 x 1.8 cm)Scarf (approx. 3.6 x 2.8 cm) The punch is made of 100 % steel and fits all standard punching and embossing machines (e.g. Big Shot & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 08 August 2025

Die - Designline - Fischchen Trio mit Streifen 🐟💙⚓🌞🎨✨ Three cheerful little fish with stripes and a sweet smile - They'll swim straight into your hearts and onto your nautical projects! 🐟 S triped fish in three different sizes 💙 With a smile on their face - easy to fall in love with ⚓ Perfect for summery cards, packaging & layouts 🌞 Brings lightness and good humour to craft projects 🎨 Ideal for combining with other nautical sets ✨ A charming eye-catcher on any craft project A little swarm full of charm - for great creative fun! 🐠💌The individual punches have the following sizesFish (approx. 3.7 x 1.9 cm)Fish (approx. 5.1 x 2.5 cm)Fish (approx. 6.1 x 3.0 cm) The punch is made of 100 % steel and fits all standard punching and embossing machines (e.g. Big Shot & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 25. July 2025

Die - Muschel - AnhängerkärtchenA beautiful maritime tagto unfold in the shape of a shell.A great eye-catcher for maritime decorations.The punch has a size of approx. 7.7 x 14.8 cm.The tag card has a size of approx. 7.7 x 7.4 cm.The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film.  Material: 100 % steel On Pinterest and in our creative collection we have collected lots of great ideas for this punch. Take a look and let yourself be inspired. Published on: 19. July 2024

Die - Großer KrebsA beautiful large crabwith lots of embossed details.Beautiful as a backgroundon layouts with pictures fromlast vacation by the sea.The die-cutter has a size of approx. 10.5 x 6.8 cm The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film.  Material: 100 % steel On Pinterest and in our creative collection we have collected lots of great ideas for this punch. Take a look and let yourself be inspired. Published on: June 07, 2024

The "Designline - Color me - Muscheln" photopolymer stamp setconsists of 6 stamps on an A5 sheet.Beautiful shells and sayings that can becan be wonderfully colored and yourmaritime works complement.The stamps have the following sizes Muschel (ca. 6,0 x 6,3 cm)Muschel (ca. 6,0 x 7,3 cm)Muschel (ca. 7,2 x 4,8 cm)Muschel (ca. 5,7 x 3,6 cm)Shells... a love letter in the sand. (approx. 9,0 x 3,9 cm)The secret of a happy life is to go to the sea once in a while. (approx. 12,7 x 6,7 cm)The illustrations for this set are by Annika Flebbe of Flebbe Art.To use the stamps you need acrylic blocks, which are not included in this offer.We've collected lots of ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.In addition to the stamp set "Designline - Color me - Muscheln" we have other sets designed by artists. You can find them under the heading "Designline".

Die Anker Duo - gestitched Stanze ist ein Set aus zwei Stanzen. Es wird ein Ankermuster ins das Papier durch Stitchlinie "gemalt" und das Papier bleibt vollständig. Es wird kein Anker herausgestanzt. Der große Anker hat eine Höhe von 5,1 cm und eine Breite von 4,8 cm Der kleine Anker hat eine Höhe von 3,4 cm und ist 3,0 cm breit. In Kürze findet Ihr hier auch Beispiele von unserem Designteam. In unserer Kreativsammlung und auf Pinterest haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Achtung: Diese Stanze ist ein Set aus 2 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend. Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 25. Dezember 2020

Die - Designline - Möwen Freunde🐦⚓😄🌊🎣💬 What would a maritime summer's day be without a few cheeky seagulls? With our seagull friends, you can bring humorous lightness and Nordic charm to your projects - the little feathered creatures are perfect for cards, packaging and summery layouts. 🐦 F unny seagulls in various poses ⚓ Maritime look for holiday projects & love of the sea 😄 With a cheeky look & lots of personality 🌊 Ideal for cards, packaging or decorations with a coastal flair 🎣 A must-have for anyone who loves the sea - and can't be mad at seagulls! 💬 C ackling guaranteed - these seagulls bring good humour to paper! Whether cheeky, charming or simply adorable - these seagulls steal hearts instead of fries! 🐟💕The individual punches have the following sizesSeagull (approx. 5.6 x 4.6 cm)Seagull (approx. 4.9 x 4.0 cm)Seagull (approx. 3.0 x 5.3 cm)Seagull (approx. 5.0 x 5.0 cm)Scarf knot (approx. 1.6 x 1.5 cm)Bib/tie (approx. 2.0 x 2.8 cm) The punch is made of 100 % steel and fits all standard punching and embossing machines (e.g. Big Shot & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 25. July 2025

Das “Hintergrund Nautisches Muster" Photopolymer Stempelsetbesteht aus 4 Stempeln auf einem großen A5 Sheet.Ein wunderschöner großer Stempel mit verschiedenen maritimenBegriffen und Motiven für maritime Hintergründe.Passend runden ein Segelschiff und zwei Bauzeichnungen von Booten das Set ab.Damit ihr den großen Stempel richtig gut abstempeln könnt,empfehlen wir euch wegen der Größe eine Stempelhilfe.Die einzelnen Stempel in diesem Set haben folgende GrößenHintergrund maritime Begriffe & Motive (ca. 13,3 x 13,3 cm)Segelschiff (ca. 4,9 x 7,6 cm)Bauzeichnung 1 (ca. 5,0 x 2,0 cm)Bauzeichnung 2 (ca. 3,4 x 2,2 cm)Die besten Ergebnisse werden mit den Stempelkissen VersaFine Clair erzielt.Damit die Stempel verwendet werden können benötigt ihr Acrylblöcke, die nicht mit in diesem Angebot beinhaltet sind.Viele Ideen zu diesem Stempelset haben wir auf unserer Pinterest-Pinnwand und in unserer Kreativ-Sammlung zusammengetragen. Schaut doch mal vorbei und lasst euch inspirieren.Veröffentlicht am: 24. Juni 2022

Das Stanzen-Set besteht aus 4 einzelnen runden Stanzen. In jedem Kreis schwimmen verschiedene Fische, womit wunderschöne maritime Karten, Verpackungen und Layouts gestaltet werden können. Die einzelnen Kreise haben folgende Größen: 1. ca. 5,3 cm Durchmesser 2. ca. 3,8 cm Durchmesser 3. ca. 2,8 cm Durchmesser 4. ca. 2,3 cm Durchmesser Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 28. Mai 2021 423

🌸 “Cosmea Decorative Baskets” die – delicate blooms for your favourite floral projects With the “Cosmea Decorative Baskets” die, you can bring the natural lightness of summer flowers to your cards and craft projects. The delicate cosmea blooms in various sizes are perfect for floral arrangements, subtle accents and lovely decorations. The intricately detailed blooms lend your projects a romantic yet natural charm and can be combined in countless ways. ✨ What makes this die-cut set special : 🌸 Intricate cosmea blooms in various sizes ✂️ Delicate die-cut results with fine floral textures 🌿 Beautiful for floral arrangements and decorations 🎨 Ideal for layering and 3D effects 🌿 Highlights : Perfect for cards and gift wrapping Ideal for spring and summer projects Versatile combinations with leaves, twigs and lettering Natural and elegant look 💡 Perfect for : Greeting and congratulatory cards 💌 Gift wrapping 🎁 Scrapbooking & Journaling 📒 Floral decorations 🌸 Wedding and spring projects 💛 👉 Tip : Die-cut the flowers in various shades and combine them to create lush floral arrangements. Slightly curved petals create particularly beautiful 3D effects. A die-cut set full of summery floral splendour – delicate, elegant and perfect for creative floral projects 🌸✨💛🌿. The die-cuts come in the following sizes: Flower (approx. 2.4 x 3.5 cm)Flower (approx. 2.5 x 4.0 cm) Flower (approx. 3.7 x 3.1 cm) Flower (approx. 2.5 x 2.0 cm) Flower (approx. 3.5 x 5.5 cm) Flower (approx. 3.8 x 6.0 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 17 July 2026

🌊🐙 ‘Unterseefenster II’ die – creative underwater worlds with a depth effect With the ‘Unterseefenster II’ die, you can create fascinating underwater scenes full of life and maritime details. The decorative window featuring corals, aquatic plants and shells creates a beautiful backdrop, whilst the two octopuses add playful and lively touches. Perfect for nautical cards, scrapbooking projects and creative underwater worlds with a special depth effect. ✨ What makes this die-cut special : 🌊 Decorative underwater window with lots of lovely details 🐙 Two cute octopus motifs in different sizes 🪸 Incorporates coral, aquatic plants and nautical elements ✂️ Delicate die-cut results with impressive detail 🌿 Highlights : Perfect for nautical and summery projects Ideal for layering and window effects Beautiful as an eye-catcher on cards and packaging Versatile and easy to combine with sea and beach motifs 💡 Perfect for : Nautical greeting cards ⚓ Scrapbooking & Journaling 📒 Gift wrapping 🎁 Summer and holiday memories ☀️ Creative underwater scenes 🌊 👉 Tip : Fill the window with watercolour backgrounds in shades of blue and turquoise and use 3D pads to raise the octopuses slightly. This creates stunning underwater scenes with plenty of depth and vibrancy. A die-cut set full of marine magic – rich in detail, playful and perfect for creative underwater adventures 🌊🐙🪸✨💙 The dies come in the following sizes: Window (approx. 4.0 x 8.2 cm)Octopus (approx. 3.7 x 3.6 cm)Octopus (approx. 3.0 x 3.0 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 17 July 2026

🪼 ‘Jellyfish Window’ die – fascinating underwater worlds with a delicate window effect With the ‘Jellyfish Window’ die, you can bring the mysterious beauty of the deep sea to your cards and craft projects. The intricately detailed jellyfish blends harmoniously with a decorative window, creating extraordinary designs full of movement and maritime elegance. Whether as an eye-catcher on cards, as a window element or for creative underwater landscapes – the delicate tentacles and fine details make this die-cut a real highlight. ✨ What makes this die-cut special : 🪼 Intricate jellyfish with delicate tentacles 🪟 Integrated window effect for special card designs 🌊 Perfect for maritime and summery projects 🌿 Highlights : A beautiful eye-catcher for cards and gift wrapping Ideal for layering and depth effects Combines perfectly with seaside and underwater motifs A delicate look with an elegant feel 👉 Tip : Place the window against watercolour backgrounds in shades of blue and turquoise or shimmering paper to emphasise the jellyfish’s mesmerising effect even more. A die-cut full of ocean magic – delicate, elegant and perfect for creative underwater adventures 🪼🌊✨💙The die-cut comes in the following sizes: Window (approx. 6.4 x 8.2 cm) Jellyfish (approx. 5.8 x 6.5 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 17 July 2026

🌿 ‘Eucalyptus’ die-cut set – natural elegance for your creative projects With the ‘Eucalyptus’ die-cut set, you can bring the timeless beauty of those popular eucalyptus sprigs to your cards, gift wrappings and decorations. The delicate leaves and varied branch shapes lend your projects a natural lightness and can be combined in countless ways. Whether as a delicate background, a decorative accent or a floral focal point – the eucalyptus branches suit almost any occasion and any creative style. ✨ What makes this set special : 🌿 Several eucalyptus sprigs in different sizes and shapes ✂️ Delicate die-cut results with fine details 🌸 Timeless design for all year round 🎨 Perfect for layering and floral arrangements 🌿 Highlights : Beautiful for natural and elegant designs Ideal as a background or decorative accent Versatile for combining with flowers, wreaths and lettering Perfect for modern, romantic and seasonal projects 💡 Perfect for : Greeting and congratulatory cards 💌 Wedding cards & invitations 💍 Gift wrapping 🎁 Scrapbooking & journaling 📒 Floral decorations and home décor projects 🌿 👉 Tip : Die-cut the branches in various shades of green or from parchment paper and combine them to create lush floral arrangements with a particularly natural look. A die-cutting set full of natural beauty – delicate, versatile and perfect for elegant creative projects 🌿✨💚 The dies come in the following sizes: Eucalyptus sprig (approx. 3.5 x 6.6 cm) Eucalyptus sprig (approx. 3.9 x 5.9 cm) Eucalyptus sprig (approx. 1.8 x 3.3 cm) Eucalyptus sprig (approx. 3.4 x 8.2 cm) Eucalyptus twig (approx. 1.6 x 4.1 cm) Eucalyptus twig (approx. 1.9 x 3.1 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 17 July 2026