Die - Eukalyptus Set

Using the punch ‘Little Leaf Wreath’ , you can create a delicate wreath from a variety of leaves and twigs. Additional individual leaves and small clusters of leaves can be used to complement the design beautifully or on their own. The natural design is perfect for autumnal cards with heartfelt messages, gift wrapping and many other occasions.💡 Tip: Die-cut the individual leaves from different coloured papers and arrange them on the wreath. Using adhesive foam pads creates additional layers and a particularly lively 3D effect. Natural variety for your creative projects The dies come in the following sizes:Leaf wreath (diameter approx. 8.8 cm)Leaf (approx. 0.5 x 1.1 cm)Leaf (approx. 0.5 x 1.1 cm)Leaf (approx. 0.7 x 1.2 cm)Leaf (approx. 0.6 x 1.3 cm)Leaf (approx. 1.6 x 1.9 cm)Leaf (approx. 1.6 x 1.9 cm)Leaf (approx. 1.5 x 1.9 cm)Sheet (approx. 1.5 x 1.9 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an extra layer of backing or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 18 September 2026

With the ‘Pumpkin – Fan-shaped – Large’ die, you can create impressive three-dimensional pumpkins that are guaranteed to be the centrepiece of any autumnal decoration. By assembling the individual die-cut pieces, you’ll create a beautiful, voluminous pumpkin with a stunning fan-shaped effect – ideal for table decorations or autumnal arrangements.You’ll need around 24 die-cut pieces to create a particularly beautifully filled pumpkin. Depending on your choice of paper, colour gradient and pattern, each pumpkin takes on its very own character.✨ Creative tip Combine different colours of card or patterned design paper and add small accents with leaves, twigs, bows or jute ribbon. The large pumpkin looks particularly lovely when used alongside the ‘Pumpkin – fanned – small’ die to create autumnal decorations with varying sizes and plenty of depth. The individual dies have the following dimensions: Pumpkin (approx. 8.7 x 16.0 cm each), Stem (approx. 1.9 x 3.1 cm), . The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 4 September 2026

With the ‘Little Garden Hangings’ die-cut set, you can create enchanting little hangings that add a lovely garden charm to your creative projects. The cute designs – a little gnome with a watering can, a gnome seen from behind, a snail and a mushroom – are perfect as decorative tags or little eye-catchers. Whether for spring, summer or autumn projects, these little tags add a touch of whimsy and inspire creative designs.✨ Creative tip Make the little pendants from coloured cardstock and embellish them with ribbons, cord or small wooden beads. They look particularly pretty on gift wrappings, floral bouquets or homemade jams, and lend every project a lovely, fairy-tale garden charm. The individual dies come in the following sizes: Gnome with watering can (approx. 3.1 x 3.6 cm) Gnome (approx. 1.9 x 3.6 cm) Snail (approx. 2.5 x 2.2 cm) Mushroom (approx. 1.8 x 3.2 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 4 September 2026

With the ‘Pumpkin – Fan-shaped – Small’ die-cut, you can conjure up beautiful three-dimensional pumpkins in no time at all, adding a very special touch to your autumn projects. By assembling the individual die-cut pieces, you create a decorative, fan-shaped pumpkin with impressive volume – perfect for autumnal home décor.You’ll need around 24 die-cut pieces to create a beautifully full pumpkin. Depending on your choice of paper and colour scheme, you can create ever-changing, unique autumn highlights.✨ Creative tip: Die-cut the individual elements in different shades – from cream to mustard yellow to rusty orange – and combine them to create a vibrant pumpkin with a natural colour gradient. Complemented with twigs, leaves, bows or jute ribbon, you can create beautiful autumnal arrangements that are guaranteed to catch everyone’s eye. The individual dies are as follows: Pumpkin (approx. 10.1 x 6.7 cm each) Stem (approx. 2.3 x 3.8 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it is suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 4 September 2026

Christmas-themed window & tags for festive craft projectsWith the ‘Holly Window and Tags’ die, you can create beautiful Christmas accents for cards, gift wrapping and small gifts. The decorative holly window with leaves and berries is complemented by various small pendant motifs, offering you plenty of options for personalised Christmas projects. The heart, deer, crown, star and moon each feature a small eyelet, making them perfect for use as pendants. Whether attached individually to a gift ribbon, used as decoration on cards or combined with the delicate holly window – the motifs create a lovely and festive look.👉 Tip: Place coloured, glossy or transparent paper behind the holly window to create beautiful contrasts. You can die-cut the small tags from metallic, glittery or coloured cardstock and attach them to your gifts with fine thread or a cord. A versatile Christmas die-cutting set for festive details – a delicate holly window, enchanting tags and plenty of possibilities for lovingly crafted Christmas projects. The dies come in the following sizes: Holly window (approx. 4.7 x 5.0 cm) Heart tag (approx. 2.2 x 2.8 cm) Deer tag (approx. 2.2 x 2.8 cm)Crown tag (approx. 2.5 x 1.8 cm)Star tag (approx. 2.9 x 3.3 cm)Moon tag (approx. 2.3 x 2.9 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional layer of backing or a die-cutting aid. 📌 Looking for inspiration? We’ve gathered lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 4 September 2026

With the daisy border punch, you can create delicate floral borders for your creative projects in no time at all. The dainty daisy border is perfect for adding a natural, spring-like touch to your projects. Additional individual flowers and leaves offer you plenty of opportunities to customise the border or add small floral accents. This allows you to create new, lovely arrangements time and time again.✨ Creative tip : Punch out the floral border from white cardstock and colour the daisies in delicate pastel shades or classic white-and-yellow combinations. With the additional flowers and leaves, you can extend the border, create small floral arrangements or add individual accents. The border punch also looks particularly lovely when combined with the daisy wreath for harmoniously coordinated spring and summer projects. The individual punches have the following sizes: Border punch (approx. 15.4 x 1.8 cm) Flower (approx. 1.2 x 1.2 cm) Flower (approx. 1.1 x 1.2 cm)Flower (approx. 0.9 x 0.8 cm) Flower (approx. 1.0 x 0.8 cm) Flower (approx. 1.1 x 0.9 cm) Flower (approx. 1.2 x 0.9 cm) Leaf (approx. 0.7 x 0.4 cm)Leaf (approx. 0.8 x 0.4 cm) Leaf (approx. 1.1 x 0.5 cm) Leaf (approx. 1.1 x 0.5 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 4 September 2026

With the ‘Daisy Wreath’ die, you can create beautiful floral wreaths full of lightness and natural charm in no time at all. The delicate wreath, made up of lots of little daisies, is complemented by additional individual flowers and leaves, so you can decorate and expand it to suit your own personal style.Whether for spring or summer decorations – this delicate floral wreath lends every project a romantic and natural charm.✨ Creative tip: Die-cut the wreath from white cardstock and colour the flowers with alcohol markers or watercolours. With the additional flowers and leaves, you can highlight individual areas or create a particularly lush floral wreath. In the centre, lovely lettering, monograms or small motifs find their perfect place, turning every project into a very special eye-catcher. The individual dies come in the following sizes: Daisy wreath (diameter approx. 8.4 cm) Flower (approx. 1.0 x 0.8 cm) Flower (approx. 1.3 x 0.9 cm)Flower (approx. 1.0 x 0.9 cm), Flower (approx. 1.2 x 1.1 cm), Flower (approx. 1.2 x 1.2 cm), Flower (approx. 1.2 x 0.9 cm), Leaf (approx. 1.1 x 0.5 cm)Leaf (approx. 1.1 x 0.4 cm) Leaf (approx. 0.8 x 0.4 cm) Leaf (approx. 0.8 x 0.4 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve gathered lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 4 September 2026

 Verleihe deinen kreativen Projekten einen Hauch von nostalgischem Charme mit dem Photopolymer Stempelset „Vintage Love II“. Die kunstvoll gestalteten Vintage-Motive vereinen Schmetterlinge, botanische Elemente, Schriftfragmente und dekorative Strukturen zu einem harmonischen Set, das sich perfekt für Mixed-Media-Projekte und stilvolle Hintergründe eignet.Ob als dezenter Hintergrund, markanter Blickfang oder in Kombination mit weiteren floralen und Vintage-Motiven – dieses Stempelset eröffnet unzählige Möglichkeiten für individuelle Karten, Scrapbook-Seiten und kreative Journals.✨ Kreativ-TippStemple einzelne Motive in unterschiedlichen Brauntönen, Grau oder Schwarz und kombiniere sie mit Distress Ink, Aquarellfarben oder Schablonen. Mehrere Abdrucke übereinander erzeugen wunderschöne Vintage-Layering-Effekte und verleihen deinen Projekten eine einzigartige Tiefe und einen authentischen Shabby-Chic-Look. Die einzelnen Stempel haben folgende GrößenHintergrund mit Schmetterling (ca. 5,7 x 6,5 cm)länglicher Hintergrund (ca. 3,0 x 8,6 cm)kleiner Hintergrund (ca. 2,6 x 5,1 cm)Pflanze (ca. 3,6 x 6,5 cm)Gräser (ca. 2,4 x 4,5 cm)Die Idee für dieses Stempelset stammt von Steffi Glende aka StilfeinDesign. ✅ Produktdetails: • Photopolymer-Stempelset auf A6 Sheet • Präzise Linienführung & klare Abdruckqualität • Vielseitig einsetzbar für Karten, Verpackungen, Planer & mehr • Ideal kombinierbar mit anderen Sets aus unserer Kollektion Für besonders schöne Ergebnisse empfehlen wir die Verwendung der VersaFine Clair Stempelkissen. Damit du sofort loslegen kannst, denk bitte daran: Zur Anwendung benötigst du einen passenden Acrylblock – dieser ist nicht im Lieferumfang enthalten. 💡 Inspiration gesucht? Schau gerne bei unserem [Designteam] vorbei oder lass dich durch unsere [Kreativsammlung] und [Pinterest-Pinnwand] treiben – dort findest du viele tolle Beispiele & Ideen rund um dieses Stempelset. 💕 📅 Veröffentlicht am:  28. August 2026

🌸Give your little shops and boxes a blossoming charm! With the ‘Shop Roof Flower Vines’ die, you can create beautiful floral roof decorations that are perfectly matched to the bakery box and many other shop fronts. The two delicate flower vines nestle decoratively along the edges of the roof and give your creative projects a lovely, detailed look. Whether it’s a flower shop, café, market stall or small gift box – these floral elements let you create enchanting eye-catchers in no time at all. Highlights🌸 Suitable for the bakery box and many other shop fronts 🏡 Two delicate floral tendrils for the left and right sides of the roof ✂️ Ideal for die-cutting from coloured card, patterned paper or parchment Creative tip Die-cut the floral tendrils from different coloured card and attach individual blooms slightly raised using a small foam adhesive pad. This creates a beautiful 3D effect that makes your shop front look particularly lively and inviting. 🌸🏡 The individual dies are available in the following sizes: Flower tendril (approx. 7.3 x 5.8 cm) Flower tendril (approx. 7.7 x 6.8 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 28 August 2026

🌸 With the ‘Zinnia Set’ die-cut set, you can add beautiful floral touches to your craft projects in no time at all. The four delicate zinnias in various sizes are perfect for creating natural floral arrangements, summery cards and lovely decorations. Whether used individually as a delicate focal point or combined to form a lush bouquet – the intricately detailed blooms lend your projects an elegant and vibrant look. ✨ What’s in it for you 🌸 Four delicate zinnias in various sizes 🌿 Intricate blooms and leaves for a natural look 💐 Ideal for combining into bouquets and floral arrangements 🎨 Beautiful for colouring or die-cutting from coloured cardstock ✂️ Suitable for all standard die-cutting and embossing machines ❤️ Perfect for 💌 Greeting and congratulatory cards 🎁 Gift wrapping and tags 📖 Scrapbooking and journaling 🌼 Spring and summer projects 🌸 Multi-layered floral decorations ✨ Creative tip Die-cut the zinnias from different coloured cardstock and combine them to create a casual bouquet. Using a bit of foam tape or several layers of paper creates beautiful 3D effects that make your cards and gift wrappings look particularly lively. 🌸💚 The individual dies are the following sizes: Flower (approx. 3.2 x 8.4 cm) Flower (approx. 3.4 x 7.9 cm) Flower (approx. 2.2 x 5.7 cm) Flower (approx. 2.4 x 5.5 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things, : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 28 August 2026

🌸 With the ‘Blumenshop Deko’ set, you can create a lovingly decorated florist’s shop, down to the very last detail! This comprehensive set contains numerous delicate decorative elements – from flowers and plants to wreaths and flower pots, right through to a table and a hanging flower pot. The dies are perfectly matched to the Bakery Box and other shop fronts, transforming them in no time at all into a blossoming flower shop full of charm. Highlights🌸 Perfect for the Bakery Box and creative shop fronts 🪴 Extensive set with lots of floral decorative elements 🌿 Featuring flowers, plants, wreaths, plant pots, a watering can, a table, a hanging basket and other accessories ✂️ Ideal for detailed miniature scenes and 3D projects ✨ Beautiful to create using coloured card, patterned paper or watercolour paper. Creative tip Mix and match the individual plants, flower pots and accessories however you like and set up your very own flower shop. With different shades of green, colourful blooms and little highlights, you’ll create a lively scene that instantly evokes that springtime feeling and invites you to linger. 🌼🪴🌿 The individual die-cuts are the following sizes: Hanging plant (approx. 2.5 x 3.3 cm) Flower (approx. 1.6 x 3.1 cm) Flower (approx. 1.4 x 2.7 cm) Feather grass (approx. 1.6 x 3.2 cm)Twig (approx. 1.0 x 3.0 cm)Table (approx. 2.4 x 1.6 cm)Plant (approx. 1.2 x 1.2 cm)Pot with plant (approx. 3.3 x 2.0 cm)Twig (approx. 1.3 x 3.5 cm)Vase (approx. 0.8 x 1.6 cm)Jug (approx. 1.4 x 2.1 cm)Wreath (approx. 2.8 x 2.6 cm)Handle (approx. 1.5 x 0.8 cm)Handle (approx. 0.5 x 0.2 cm)Bucket (approx. 1.5 x 1.6 cm)Plant (approx. 1.5 x 1.7 cm)Plant (approx. 1.6 x 1.4 cm)Grass (approx. 2.1 x 2.0 cm) Flower (approx. 0.8 x 1.8 cm) Flower (approx. 0.8 x 2.0 cm) Flower (approx. 0.8 x 1.4 cm) Flower (approx. 1.3 x 2.4 cm)Pot (approx. 0.9 x 0.8 cm)Pot (approx. 0.9 x 0.8 cm)Pot (approx. 1.0 x 0.8 cm)Pot (approx. 1.1 x 0.8 cm)Grass (approx. 2.0 x 3.2 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 28 August 2026

With the ‘Large Dahlia – Negative’ die, you can create elegant backgrounds and fascinating paper art in no time at all. This delicate negative die cuts the fine contours of a magnificent dahlia blossom directly into your paper, creating a modern, stylish look with exceptional depth. Whether used as a subtle background or a central design element, this large blossom adds floral accents to cards, gift wrapping, scrapbook pages and home décor projects.✨ Creative tip Place coloured cardstock, watercolour paper or shimmering parchment behind the die-cut dahlia. This creates a beautiful contrast that really brings out the delicate petals to great effect. Bend the individual petals slightly upwards to create an elegant 3D effect. The die measures approx. 8.1 x 7.9 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things, : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 28 August 2026

This high-quality design paper in mauve, with its stylish pattern, provides a beautiful base for your creative projects. 💛 Whether on cards, in albums or for making boxes – this paper is incredibly versatile and features a stunning print on both sides. ✂️ Product details at a glance : Size: 30.5 x 30.5 cm Paper weight: 200 g/m² Finish: mattPrinted on both sides – for twice the creative possibilities High quality – perfect folds & clean edges 💡 Particularly suitable for : ✔ Greeting cards & packaging ✔ Mini-albums & journals ✔ Box-making & decorative projects The paper is sturdy yet easy to work with – ideal for use with folding and die-cutting machines. 📦 Shipping information : Due to its size, this paper can only be sent as a parcel. ℹ️ Non-returnable. 📸 Looking for inspiration? You’ll find lots of creative ideas in our [Creative Collection] and on [Pinterest] – do have a look! 📅 Published on : 17 July 2026 📌 Please note : Colours may vary depending on your screen settings.

🌊🐙 ‘Sea Creatures’ die-cut set – a fascinating underwater world for your creative projects With the ‘Sea Creatures’ die-cut set, you can dive into the fascinating world of the oceans. The intricately detailed motifs featuring seahorses, octopuses and jellyfish bring life, movement and maritime charm to your cards, layouts and gift wrappings. The delicate designs are perfect for summery and nautical projects and can be combined beautifully with one another. ✨ This is what makes this set so special : 🌊 Lovingly designed sea creatures in various sizes 🐙 A playful octopus as a special eye-catcher 🐴 Delicate seahorses with beautiful details 🪼 Elegant jellyfish for vibrant underwater scenes ✂️ Intricate die-cut designs with a delicate finish 🌿 Highlights : Perfect for nautical cards and decorations Ideal for layering and 3D effects Beautiful for summery and nautical projects Versatile and easy to combine with other sea and beach motifs 💡 Perfect for : Nautical greeting cards ⚓ Summer and holiday projects ☀️ Scrapbooking & journaling 📒 Gift wrapping 🎁 Creative underwater landscapes 🌊 👉 Tip : Combine the sea creatures with watercolour backgrounds in shades of blue and turquoise, coral motifs or tracing paper to create stunning underwater worlds with plenty of depth. A die-cut set full of marine magic – richly detailed, nautical and perfect for creative underwater adventures 🌊🐙🐴🪼✨💙 The dies come in the following sizes:: seahorse (approx. 2.2 x 5.0 cm), squid (approx. 5.0 x 7.5 cm), jellyfish (approx. 4.4 x 5.3 cm), jellyfish (approx. 2.4 x 7.0 cm), seahorse (approx. 3.0 x 6.9 cm), The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in many different ways – it’s suitable for, amongst other things, : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 17 July 2026