Ink pen - black - 0.50 mm

Double-sided adhesive tape on a roll. The width of the adhesive strip is 6mm and the total length on the roll is 10m. This tape is permanent / non-removable. Thickness: 6mm Content: 10m 

Double-sided adhesive tape on a roll. The width of the adhesive strip is 12 mm and the total length on the roll is 10 metres. This tape is permanent / non-removable. Thickness: 12 mm Content: 10 m

Adhesive pads from Scrapbook Adhesives, a total of 236 round spacers in different sizes are included in one pack. There are 2 different sizes included 6 mm x 6 mm and 12 mm x 12 mm. The height of the 3D pads is approx. 2 mm, with the double-sided adhesive pads you can conjure up great 3D effects. They stick strongly and permanently.Made in DenmarkNo. 01226

Karin - BrushMarker Pro - goldfarbend; The pens contain 2.4 ml of colour. They are manufactured using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. In addition, they are equipped with a Japanese, very strong and super-flexible nylon tip.   Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water. Tips for use The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper.   Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use.   Please do not expose the Brushmaker PRO to excessive sunlight or heat.  Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.