DecoBrush - Metallic - Black

Karin - DecoBrush - Metallic Silver Markers contain 2.4 ml of non-toxic colour based on metallic pigments that provide excellent coverage on black and white surfaces. They are produced using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously monitored. DecoBrush metallic markers are permanent, lightfast and waterproof on various surfaces such as paper, wood, etc. after drying. Particularly suitable for somewhat rough surfaces. Shake before use to ensure colour uniformity and smooth operation. Repeat until the colour in the marker housing is uniformly mixed. Shaking is not necessary if the marker has been in use for the last hour. Very rough and absorbent surfaces may require the application of several coats of paint. Tip: The pens should be stored in a horizontal position. And always with the cap closed. When storing markers in a vertical position (tip up or down) for longer periods of time, shake the marker until the colour is even in the casing. Then use a small amount until the correct colour is achieved. Please do not expose the DecoBrush - Metallic Marker to excessive sunlight or excessive heat. Please remember that colour deviations from the original shade are possible, as the display may vary depending on the screen settings.

Karin - BrushMarker Pro - Black; The pens contain 2.4 ml of colour. They are manufactured using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. In addition, they are equipped with a Japanese, very strong and super-flexible nylon tip.   Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water. Tips for use The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper.   Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use.   Please do not expose the Brushmaker PRO to excessive sunlight or heat.  Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.

Karin - DecoBrush - Metallic Red Gold Markers contain 2.4 ml of non-toxic colour based on metallic pigments that provide excellent coverage on black and white surfaces. They are produced using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously monitored. DecoBrush metallic markers are permanent, lightfast and waterproof on various surfaces such as paper, wood, etc. after drying. Particularly suitable for somewhat rough surfaces. Shake before use to ensure colour uniformity and smooth operation. Repeat until the colour in the marker housing is uniformly mixed. Shaking is not necessary if the marker has been in use for the last hour. Very rough and absorbent surfaces may require the application of several coats of paint. Tip: The pens should be stored in a horizontal position. And always with the cap closed. When storing markers in a vertical position (tip up or down) for longer periods of time, shake the marker until the colour is even in the casing. Then use a small amount until the correct colour is achieved. Please do not expose the DecoBrush - Metallic Marker to excessive sunlight or excessive heat. Please remember that colour deviations from the original shade are possible, as the display may vary depending on the screen settings.

Karin - DecoBrush - Metallic Blue Markers contain 2.4 ml of non-toxic colour based on metallic pigments that provide excellent coverage on black and white surfaces. They are produced using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously monitored. DecoBrush metallic markers are permanent, lightfast and waterproof on various surfaces such as paper, wood, etc. after drying. Particularly suitable for somewhat rough surfaces. Shake before use to ensure colour uniformity and smooth operation. Repeat until the colour in the marker housing is uniformly mixed. Shaking is not necessary if the marker has been in use for the last hour. Very rough and absorbent surfaces may require the application of several coats of paint. Tip: The pens should be stored in a horizontal position. And always with the cap closed. When storing markers in a vertical position (tip up or down) for longer periods of time, shake the marker until the colour is even in the casing. Then use a small amount until the correct colour is achieved. Please do not expose the DecoBrush - Metallic Marker to excessive sunlight or excessive heat. Please remember that colour deviations from the original shade are possible, as the display may vary depending on the screen settings.

The 3D Christmas tree - small is a real highlight for all your winter and Christmas projects. A wonderfully intricate Christmas tree with a star ⭐ is created in just one punching process, which transforms into a stable 3D shape simply by folding forwards and backwards. Perfect for modern, minimalist decorations or lovely accents in your handicrafts. Whether individually, as a family of trees or in combination with little houses, lights or snowy landscapes - these little trees instantly bring winter magic into your home. ❄️✨ How it works: 1️⃣ Punch out the motif once 2️⃣ Carefully bend the struts forwards and backwards 3️⃣ Align the star - your standing 3D tree is ready 🎄 Also ideal for paper in wood-effect, white, kraft, metallic or glittering winter colours. 💖 Perfectly suitable for: 🏠 Winter & Christmas decorations (windowsill, shelf, table) 🎁 Gift wrapping & tags 📦 Advent trays & tabletop decorations 📓 Scrapbooking & dioramas ✨ Small decoration sets for markets & gifts ✨ S pecial features: ⭐ One die-cut part - ready for immediate use 🌲 Easy to fold, stable standing 💎 Filigree tree structure with star tip 🎨 Suitable for many types of paper: Cardboard, glitter paper, kraft paper, metallic 💫 Can be combined with cottage, pine forest & landscape punches With the Die - 3D Christmas tree (small), you can create atmospheric, modern Christmas decorations in no time at all that are light, elegant and incredibly versatile - a small work of art with a big impact. 🎄✨The die-cutter measures approx. 8.1 x 11.1 cm. The punch is made of 100% steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 29. November 2025