Brushmarker - Sandstone
€2.50
Available, delivery time: 5 days
Product information "Brushmarker - Sandstone"
Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water.
Tips for use
The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper.
Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use.
Please do not expose the Brushmaker PRO to excessive sunlight or heat.
Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.
Other crafters also bought
Karin - DecoBrush - Metallic Copper Markers contain 2.4 ml of non-toxic colour based on metallic pigments that provide excellent coverage on black and white surfaces. They are produced using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously monitored. DecoBrush metallic markers are permanent, lightfast and waterproof on various surfaces such as paper, wood, etc. after drying. Particularly suitable for somewhat rough surfaces. Shake before use to ensure colour uniformity and smooth operation. Repeat until the colour in the marker housing is uniformly mixed. Shaking is not necessary if the marker has been in use for the last hour. Very rough and absorbent surfaces may require the application of several coats of paint. Tip: The pens should be stored in a horizontal position. And always with the cap closed. When storing markers in a vertical position (tip up or down) for longer periods of time, shake the marker until the colour is even in the casing. Then use a small amount until the correct colour is achieved. Please do not expose the DecoBrush - Metallic Marker to excessive sunlight or excessive heat. Please remember that colour deviations from the original shade are possible, as the display may vary depending on the screen settings.
Karin - BrushMarker Pro - Blush; The pens contain 2.4 ml of colour. They are manufactured using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. In addition, they are equipped with a Japanese, very strong and super-flexible nylon tip. Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water. Tips for use The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper. Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use. Please do not expose the Brushmaker PRO to excessive sunlight or heat. Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.
Karin - BrushMarker Pro - Olive Green; The pens contain 2.4 ml of colour. They are manufactured using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. In addition, they are equipped with a Japanese, very strong and super-flexible nylon tip. Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water. Tips for use The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper. Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use. Please do not expose the Brushmaker PRO to excessive sunlight or heat. Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.
Nuvo - Glue Pen Large Flat Tip The Nuvo Large Flat Tip Glue Pen has a specially designed felt nib that glides easily over many surfaces and applies a controlled volume of glue to your crafting surface. Ideal for use with our Nuvo glitter and gilding flakes so you can add elegant detail, making it perfect for your craft projects. This large-tipped glue stick works effortlessly and dries transparent for a flawless finish. ✓ 45g/1.58fl.oz ✓ Water-based ✓ Washable The tip is 15 mm. Brand: Nuvo
Hotfoil Stamp - Frohes Fest mit SternYou will receive a Hotfoil Stamp, which represents a brush stroke with the word "Frohes Fest" and a star in the center. The brush stroke is foiled "Frohes Fest" and the star in the center remain in its original color. With these "punches" you don 't get a die cut piece, but these Hotfoil Stamps are meant to be used to foil the design onto the paper piece using a hot foiling machine and Heat Activated Foil. These Hotfoil Stamps are of a high quality, so it is better if the Hotfoil Stamps warm up along with the machine. We have had the best experience with our Hotfoil Stamps with the following device combinations: BigShot and GoPress and Foil Spellbinders and Glimmer Depending on the wear and tear on the equipment, we recommend you add some cardstock or gray cardstock to the sandwich. The size of the punch is about 9.5 x 2.0 cm. In the examples you can find first ideas from our design team. On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and let yourself be inspired. Material: 100% steel Published on: 29. October 2021