Brushmarker - Lipstic Red

Karin - BrushMarker Pro - Olive Green; The pens contain 2.4 ml of colour. They are manufactured using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. In addition, they are equipped with a Japanese, very strong and super-flexible nylon tip.   Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water. Tips for use The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper.   Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use.   Please do not expose the Brushmaker PRO to excessive sunlight or heat.  Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.

Karin - BrushMarker Pro - Cocoa; The pens contain 2.4 ml of colour. They are manufactured using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. In addition, they are equipped with a Japanese, very strong and super-flexible nylon tip.   Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water. Tips for use The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper.   Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use.   Please do not expose the Brushmaker PRO to excessive sunlight or heat.  Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.

Karin - Brushmarker PRO - Blender; the colourless blender helps to create colour gradients and shading. The pens contain 2.4 ml of colour. They are produced using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. They are also equipped with a Japanese, very strong and super-flexible nylon tip. Contains intense dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to colour in with water. Tips for use The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brush markers Pro give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper.Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the brushmarkers after each use.Please do not expose the Brushmarkers PRO to excessive sunlight or excessive heat. Please remember that colour deviations from the original shade are possible, as the display may vary depending on the screen settings.

Die - Designline - Kleine SternenboxAn enchanting box that is NOT closed.On the upper edge on each sidea big star on each side. The box makesvery well as a decoration on afestive table.The punch has a size of approx. 20.5 x 12.8 cm. The finished box has a size of approx. 5.0 x 5.0 x 8.0 cm (height incl. star).The idea for this punch comes from Sandra Möller from Papier und Passion.The punch works with all standard die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelWe have collected lots of great ideas for this punch on Pinterest and in our creative collection. Have a look and get inspired.Published on: 17 November 2023

The "Basic - Pool - Tupfen + Sternchen - Beidseitig bedruckt" design paper sheet measures 30.5 x 30.5 cm, has a paper thickness of 200 g/m² and a matt finish. We use our high-quality design paper to design greetings cards, for scrapbooking and in box making. We recommend the good quality, as the paper has beautiful folded corners and edges after the folding process. We hope you enjoy this beautiful paper.Attention: Due to its size, the paper can only be sent as a parcel. The paper cannot be exchanged!You can find inspiration at Pinterest and in the creative collection. Take a look and let yourself be inspired.Please remember, color deviations from the original shade are possible, as the display may vary depending on the screen settings.Published on: 19. July 2024

Die - Doodle Tannenwald 🌲❄️🎄🖌️ A magical set with 9 different fir trees - drawn in a lovely doodle style. Perfect for creating a beautiful fir forest for your Christmas or winter projects. 🎄Variety of tree shapes for individual scenes 🖌️Doodle style - charming & playful ❄️Ideal for cards, packaging & layouts 🎁Can be combined with houses, animals & snowy landscapes Bring a wintry, magical atmosphere to your craft projects with these cute fir trees!The individual punches in this set have the following sizesFir tree (approx. 1.1 x 3.1 cm)Fir tree (approx. 1.1 x 3.0 cm)Fir tree (approx. 1.8 x 4.2 cm)Fir tree (approx. 2.0 x 2.3 cm)Fir tree (approx. 3.1 x 6.3 cm)Fir tree (approx. 2.6 x 4.4 cm)Fir (approx. 2.0 x 2.4 cm)Fir (approx. 2.1 x 3.6 cm)Fir (approx. 1.6 x 2.8 cm) The die-cutter works with all standard die-cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 01 August 2025