Skip to main content Skip to search Skip to main navigation

Product information "Brushmarker - goldfarbend"

Karin - BrushMarker Pro - goldfarbend; The pens contain 2.4 ml of colour. They are manufactured using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. In addition, they are equipped with a Japanese, very strong and super-flexible nylon tip.
 
Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water.
Tips for use

The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper.
 
Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use.
 
Please do not expose the Brushmaker PRO to excessive sunlight or heat.
 
Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.

Please enter a valid email address.
Please enter a valid question.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Skip product gallery

Other crafters also bought

silver metallic
DecoBrush - Metallic - Silver

Karin - DecoBrush - Metallic Silver Markers contain 2.4 ml of non-toxic colour based on metallic pigments that provide excellent coverage on black and white surfaces. They are produced using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously monitored. DecoBrush metallic markers are permanent, lightfast and waterproof on various surfaces such as paper, wood, etc. after drying. Particularly suitable for somewhat rough surfaces. Shake before use to ensure colour uniformity and smooth operation. Repeat until the colour in the marker housing is uniformly mixed. Shaking is not necessary if the marker has been in use for the last hour. Very rough and absorbent surfaces may require the application of several coats of paint. Tip: The pens should be stored in a horizontal position. And always with the cap closed. When storing markers in a vertical position (tip up or down) for longer periods of time, shake the marker until the colour is even in the casing. Then use a small amount until the correct colour is achieved. Please do not expose the DecoBrush - Metallic Marker to excessive sunlight or excessive heat. Please remember that colour deviations from the original shade are possible, as the display may vary depending on the screen settings.

Regular price: €3.00
50-Sepia-074
Brushmarker - Sepia

Karin - BrushMarker Pro - Sepia; The pens contain 2.4 ml of colour. They are manufactured using "Liquid Ink" technology. This means that the colour intensity remains unchanged until the last drop and the ink output can be continuously controlled. They are twice as efficient as conventional filter markers. In addition, they are equipped with a Japanese, very strong and super-flexible nylon tip.   Contains intense, dye-based colours. The colours can be mixed together and lightened (tone transitions). Water-based ink, acid-free, environmentally friendly and non-toxic, made in the EU. Very easy to paint with water. Tips for use The brushmarkers are suitable for both hand lettering (on smooth paper) and watercolouring (on watercolour paper). As the brushmarkers give off a lot of colour, or rather are very juicy, it is better to use a smooth paper with a high grammage. If you want to watercolour with the pen, you should not allow the paint to dry completely before you paint it with the brush / water tank brush. This creates more beautiful and flowing transitions. For example, do not fill the entire surface of your motif with colour, but only colour in where you want the intensity to be strongest with the marker and then paint from there with the brush / water. If you hold the tip of the brushmarker on the paper for too long, the pen will lose a lot of colour and there is a risk that it will bleed through the paper.   Tip: The pens should be stored in an upright position with the head (tip) facing upwards and always with the cap closed. If stored in any other way, the tips could run or even leak. If the tip dries out due to prolonged unsealed storage, simply close the marker and put it to one side with the tip pointing downwards for about an hour. However, to prevent the tips from drying out and to ensure the longest possible use, you should close the Brushmarker after each use.   Please do not expose the Brushmaker PRO to excessive sunlight or heat.  Please remember that colours may differ from the original shade as the display may vary depending on the screen settings.

Regular price: €2.50
Mini Clip - silberfarbend - 20 Stück
Mini Clip - silberfarbend - 20 Stück

Mini Clip - silberfarbend - 20 StückBeautiful mini clips to hold collected workstogether or simply as a decorative element on projects. The mini clips measure approx. 8 mm x 13 mm x 6 mm You can find inspiration on Pinterest and in the creative collection. Take a look and let yourself be inspired.Please remember, colour deviations from the original shade are possible, as the display may vary depending on the screen settings.Published on: 28. March 2025

Regular price: €4.95
Die - Fir Wreath Pendant - Large
Die - Fir Wreath Pendant - Large

Using the die-cut ‘Large Fir Wreath Tag’ you can create a decorative round pendant featuring a delicate fir wreath. A multi-part bow and small berries complete the set and can be arranged as you like. The pendant is perfect for festive Christmas decorations.💡 Tip: Die-cut the wreath in various shades of green and combine it with red berries and a bow made from metallic paper. There’s space in the empty centre for some lettering or a personal message. The dies are the following sizes:Background with tag (approx. 11.0 x 11.6 cm)Fir wreath (diameter approx. 10.4 cm)Bow (approx. 7.1 x 2.3 cm)Ribbon loops (approx. 2.0 x 5.3 cm each)Berry (diameter approx. 1.3 cm)Berry (diameter approx. 1.2 cm)Berry (diameter approx. 1.2 cm)Berry (diameter approx. 1.0 cm)Berry (diameter approx. 1.0 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It is incredibly versatile – it is suitable for, amongst other things: ✔ ️ Card ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 9 October 2026

Regular price: €24.95