A Nuvo glue from Tonic Studios - Nuvo deluxe adhesive This craft glue has a fine tip and can therefore also be used for finer dots and glue lines. After 24 hours drying time, the glue becomes clear and transparent. And just like the Nuvo Drops, the glue also comes with a glitter stone on the lid. 60ml in a bottle with a fine tip
Double-sided adhesive tape on a roll. The width of the adhesive strip is 12 mm and the total length on the roll is 10 metres. This tape is permanent / non-removable.
Thickness: 12 mm
Content: 10 m
Adhesive pads from Scrapbook Adhesives, a total of 126 square spacers are in one pack. The size of the individual spacers is 11 mm x 12 mm. The height of the 3D pads is approx. 2 mm, with the double-sided adhesive pads you can conjure up great 3D effects. They are strong and permanent. Made in Denmark No. 01610
The double-sided adhesive tape - Jeje product - a 15 m roll, 10 cm wide. It is highly transparent, acid-free and has a strong hold. You can tear or cut the tape. The width of the roll is also really great, at 10 cm this is sufficient for many of our punching motifs, so you only need to cut off a small piece the width of the punch and use it as mentioned below, which makes the roll very economical.
The glue roll is great for using loose glitter, which you can find HERE.
For use with: the Big Shot, Big Shot Pro, Vagabond and other punching machines.
One possible use:
Cut a piece of the adhesive paper to the size you need for your project. Peel off the protective layer to expose the adhesive, using the handy easy peel-off section along the length of the film. Apply the adhesive paper to the back of the material to be punched and make sure that there are no creases or air bubbles.
Punch the desired material as usual. Once you have removed your die-cut part from the die-cutter, simply remove the protective layer from the back and stick the motif onto the workpiece.
