Stempelset - Knusperhäuschen für Anhänger - Nur noch so lange der Vorrat reicht

The "Kranz mit Haus" photopolymer stamp set consists of 2 stamps on a 9.5 cm x 10.5 cm sheet.A little house with two branches that go away to both sides and form a wreath.You will find the following stamps on this stamp set:Wreath with house: approx. 9,8cm x 7,7cmHouse: approx. 3,3cm x 2,8cmSo that the stamps can be used you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: 01 August 2021

Acrylic block - rectangular - 3.0 x 3.5 cmThe rectangular acrylic block has a size of 3.0 x 3.5 cm and a thickness of 2.0 cm.The block has circumferential finger grooves (recessed grips) for easy handling.The printed grid makes it easier for you to place the stamps straight, to place the stamps straight.Our stamps adhere easily to this block and are just as easy toand can be removed and stored just as easily.Published on: 24 March 2023

Acrylic block - round - 7 cmThe round acrylic block has a diameter of 7 cm and a thickness of 2.0 cm.The block has circumferential finger grooves (recessed grips) for easy handling.The printed grid makes it easier for you to place the stamps straight, to place the stamps straight.Our stamps adhere easily to this block and are just as easy toand can be removed and stored just as easily.Published on: 24 March 2023

Acrylblock - rund - 3,5 cmThe round acrylic block has a diameter of 3.5 cm and a thickness of 2.0 cm. The block has circumferential finger grooves (recessed grips) for easy handling.The printed grid makes it easier for you to place the stamps straight. Our stamps adhere easily to this block and are just as easy to remove and store again.Published on: 21. February 2025

Acrylic block - rectangular - 16.0 x 6.0 cmThe rectangular acrylic block has a size of 16.0 x 6.0 cm and a thickness of 2.0 cm.The block has circumferential finger grooves (recessed grips) for easy handling.The printed grid makes it easy to place the stamps straight, to place the stamps straight.Our stamps adhere easily to this block and are just as easy toand can be removed and stored just as easily.Published on: 24 March 2023

Die - Mini Anhänger II: With these dies, you can create designs on letters, cards, or boxes. You will receive a set of 4 (ultra) small pendant dies, designed to decorate your cards. This way, you can punch out small decorations from color-coordinated paper for your craft project. The punched-out eyelet allows our 0.3mm thread to be easily threaded, and with a steady hand, the 0.5mm thread can also fit through. Mini Circle Pendant: approximately 1.15cm wide and 1.40cm tall (with pop-up hearts) Mini House Pendant: approximately 0.85cm wide and 1.50cm tall (with pop-up stars) Mini Fir Tree Pendant: approximately 0.51cm wide and 1.75cm tall Mini Star Pendant: approximately 1.10cm wide and 1.60cm tall We have gathered many great ideas for using this die on Pinterest and in our creative collection. Take a look and get inspired. The die works with common die-cutting and embossing machines (DieCut systems). You can use it on cardboard, felt, fabric, and shrink film. For better die-cutting results, separate the two dies before using. You will find a link to a tutorial for this a paragraph below. Attention: This die is a set of 4 individual dies connected by fine metal tabs. These tabs can be easily separated using a side cutter to obtain the individual die shapes. Marion has also written a small guide on how to separate the tabs best, which you can find HERE. Material: 100% steel Made in USA If you like the "Die - Mini Pendants II", check out our small medallions as well. You can find them HERE. Published on: August 1, 2019  

Habt Ihr Lust auf was Süßes? In diesem sechsteiligen Stanzenset findet Ihr eine große Torte, eine kleine Torte, zwei Cupcakes, einen Donut und einen Herzpieker als Topping. Ob als Hochzeitstorte auf einer Karte oder als Einladung zum Kaffee, sie passen immer perfekt. Die einzelnen Stanzen haben folgende Größen große Torte: ca. 5,5 cm x 6,7 cm kleine Torte: ca. 2,2 cm x 2,3 cm Cupcake mit Herz: ca. 1,3 cm x 1,5 cm Cupcake: ca. 1,3 cm x 1,4 cm Donut: ca. 1,4 cm x 0,9 cm Herzpieker: ca. 1,1 cm x 1,7 cm Ihr könnte die kleine Torte, die Cupcakes und den Donut auch in der süßen Törtchen Platte platzieren. Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100 % Stahl Made in USA Veröffentlicht am: 18. Juni 2021

Mit der Stanze "Laternen Haus mit Herz in klein" bekommt ihr eine süße kleine Stanze in Hausform. Die Stanze hat folgende Größe: ca. 30 mm x 32 mm Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 06. August 2021

Cut & Emboss Folder - Fähnchen - Weihnachten - 11 x 15,5 cmBeautiful little flags with embossed patterns, which are simply the "icing on the cake"on your works:You crank the folder through the punching and embossing machine and it is embossed and punched at the same time. The individual tags are approximately 2.0 x 5.0 cm in size.The folder works with all standard die cutting and embossing machines (DieCut systems).For more inspiration, visit our design team. Published on: 15. September 2023

Cut & Emboss Folder - Schlichte Skandi Anhänger - 11 x 15.5 cm With this great Cut & Emboss Folder you can emboss and punch out 3 pendantswith different patterns in one step. Please place the folder CROSS into the die-cutting and embossing machine and crankit through and it will emboss and die-cut at the same time. The pendants measure approx. 4.5 x 8.1 cmThe folder works with all standard die-cutting and embossing machines (DieCut systems),but only with the normal plate and not with the magnetic plate.For more inspiration, visit our design team. Published on: 15. December 2023