Stamp set - Weihnachtsregenbögen

The "Designline - Annis Tannenbäume" photopolymer stamp set consists of 7 stamps on a large A5 sheet. Beautiful fir trees for your Christmas post or for the December Daily. The individual stamps have the following sizes Christmas tree (approx. 4.3 x 9.0 cm)Christmas tree (approx. 4.7 x 7.3 cm)Christmas tree (approx. 4.1 x 9.1 cm)Christmas tree (approx. 4.2 x 8.4 cm)Fir tree (approx. 5.1 x 7.7 cm)Fir tree (approx. 5.3 x 6.3 cm)Fir tree (approx. 4.6 x 7.0 cm)The illustrations for this set are by Annika Flebbe from Flebbe Art. You will need acrylic blocks to use the stamps, which are not included in this offer. We have collected lots of ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and let yourself be inspired. Published on: 20. September 2024

The "Designline - Carolas Weihnachtsmelodien II- Morgen Kinder" photopolymer stamp set consists of 5 stamps on a large A6 sheet. A beautiful stamp with the lyrics "Morgen Kinder wirds was geben" (Tomorrow children, there will be something). It features different fonts, cute houses, trees, and stars. It's the eye-catcher for your Christmas cards or gift tags. The lyrics of the classic song "Alle Jahre wieder" (Every year again) are kept simple and straight, perfect as a banner. This stamp set also includes three modern and beautiful fir trees. The stamps have the following sizes: "Morgen Kinder wirds was geben...": approximately 4.8 x 12.4 cm "Alle Jahre wieder...": approximately 13.6 x 1.2 cm Striped fir tree: approximately 1.6 x 3.3 cm Fir tree with star: approximately 1.6 x 3.6 cm Fir tree with heart: approximately 1.6 x 3.2 cm Carola from Carolas Bastelstübchen has illustrated the artwork for this set. To use the stamps, you will need acrylic blocks, which are not included in this offer. We have compiled many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and be inspired. In addition to the "Designline - Carolas Weihnachtsmelodien II- Morgen Kinder" stamp set, we also have other sets designed by artists. You can find them under the category "Designline". Published on: November 12, 2021

Die - Riesengroßer Christbaumanhänger I A very magical punch set with which you can create beautiful large pendants for your wintry home decor:If you put the punched out motifs on top of each other,you get a beautiful 3D landscape.Our "Large Circle Stamps" fit exactly on the edgeof the pendants. The punches in this set have the following sizes Pendant with moon (approx. 10,0 x 11,5 cm) Pendant with a house (approx. 10.0 x 11.5 cm) Circle with houses and fir trees (diameter approx. 10.0 cm) The punch works with standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 18. November 2022

Using the punch ‘Fir Branches’ , you’ll get two differently designed sprigs with delicate needles. These natural motifs are incredibly versatile and can be used for Christmas cards, winter-themed gift wrapping, tags, wreaths and festive decorations. Whether used individually or combined, they create a timeless, natural look.💡 Tip: Die-cut the branches in various shades of green and natural tones and arrange them so they overlap slightly. Small dots or metallic accents transform them into a festive Christmas decoration.The dies come in the following sizes:Twig (approx. 8.5 x 5.7 cm)Twig (approx. 4.5 x 8.9 cm)The idea for this die came from the lovely Andrea, aka Frau Blütenstempel. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 2 October 2026

Using the punch ‘Layered Ball’ , you can create a decorative Christmas bauble consisting of several harmoniously layered sections. The delicate, ornamental patterns combine to form a richly detailed design with a beautiful sense of depth. A small hanging element completes the set, turning the bauble into a special centrepiece for your Christmas decorations.💡 Tip: Die-cut the layers from different white, natural or metallic papers and glue them precisely on top of one another. With a fine ribbon, you can use the finished bauble straight away as a festive hanger. The die has the following dimensions:Ball background (diameter approx. 11.3 cm)Ball, 1st layer (diameter approx. 11.0 cm)Ball, 2nd layer (diameter approx. 10.7 cm)Ball, 3rd layer (diameter approx. 10.4 cm)Hanger (approx. 1.1 x 2.5 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It is extremely versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an extra layer of backing or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 9 October 2026

Using the die-cut ‘Large Fir Wreath Tag’ you can create a decorative round pendant featuring a delicate fir wreath. A multi-part bow and small berries complete the set and can be arranged as you like. The pendant is perfect for festive Christmas decorations.💡 Tip: Die-cut the wreath in various shades of green and combine it with red berries and a bow made from metallic paper. There’s space in the empty centre for some lettering or a personal message. The dies are the following sizes:Background with tag (approx. 11.0 x 11.6 cm)Fir wreath (diameter approx. 10.4 cm)Bow (approx. 7.1 x 2.3 cm)Ribbon loops (approx. 2.0 x 5.3 cm each)Berry (diameter approx. 1.3 cm)Berry (diameter approx. 1.2 cm)Berry (diameter approx. 1.2 cm)Berry (diameter approx. 1.0 cm)Berry (diameter approx. 1.0 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It is incredibly versatile – it is suitable for, amongst other things: ✔ ️ Card ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 9 October 2026

Using the punch ‘Star Rosette’ , you can create a striking, folded star-shaped rosette. The two long strips already have pre-marked fold lines and can be assembled into a rosette once folded. An additional small star adds a decorative finishing touch to the set. Perfect for cosy decorations during the festive season.💡 Tip: Die-cut the strips from patterned or double-sided printed paper, fold them along the lines and assemble them into the star rosette. You can place the small star on top as a decorative centrepiece. A decorative star with a special 3D effect. The punches come in the following sizes:Strips (approx. 4.5 x 18.5 cm each)Star (approx. 2.7 x 2.6 cm)The finished rosette has a diameter of approx. 9.0 cm The die is made from 100 % steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Card ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 2 October 2026

Using the die-cut ‘Layered Snowflake’ , you can create a striking snowflake made up of several coordinated layers. The various intricate patterns can be used individually or combined to form a detailed design. Perfect for winter decorations.💡 Tip: Die-cut the individual layers from different white, blue or metallic papers and glue them on top of one another, slightly offset. Using foam adhesive pads creates a particularly beautiful 3D effect.The dies come in the following sizes:Background (diameter approx. 10.5 cm)1st overlay (diameter approx. 10.0 cm)2nd overlay (diameter approx. 9.8 cm)3rd overlay (diameter approx. 9.6 cm)Tag (approx. 1.1 x 2.5 cm), glued together (approx. 1.1 x 1.2 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It is highly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 2 October 2026

Using the punch ‘Layered Bell’ , you can create a beautiful Christmas bell made up of several coordinated layers. The delicate floral ornament gives the design a particularly elegant look, whilst the different layers add depth and create exciting colour combinations. Thanks to the small eyelet, the bell also makes a wonderful pendant.💡 Tip: Die-cut the layers from different types of white, kraft or metallic paper and glue them on top of one another. With a thin ribbon, the bell becomes a special pendant for a Christmas tree, a present or a decoration.The die-cut comes in the following sizes:Bell background (approx. 6.9 x 8.2 cm)Bell 1st layer (approx. 6.6 x 7.3 cm)Bell, 2nd layer (approx. 6.3 x 7.0 cm)Bell, 3rd layer (approx. 6.0 x 6.7 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It is extremely versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer of backing or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 2 October 2026

Using the die-cut ‘Advent Calendar Stackable Box’ you can create little boxes that can be stacked and arranged to form a personalised Advent calendar. Each box has space for a little surprise, sweets or personal messages. Whether as a tower, pyramid or a little Christmas scene – you can design the calendar exactly as you like.💡 Tip: Use cardstock in two or three coordinating colours and label each box with a clearly visible Advent calendar number.The individual dies have the following dimensionsSides (approx. 15.0 x 16.7 cm)Base (approx. 6.7 x 14.0 cm)Lid half (approx. 6.7 x 10.4 cm)Lid half (approx. 6.7 x 8.0 cm)The finished box measures approx. 6.7 x 6.7 x 14.0 cm.The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not take a look and get inspired! 📅 Published on: 2 October 2026

🎄 With the ‘December Diary – Advent Calendar Numbers’ die-cut set, you can create numbers for personalised Advent calendars, diaries or festive scrapbooking projects in no time at all. The clear numbers in a circular design and the matching stars offer endless combination possibilities – for a creative, personal and festive run-up to Christmas.The set includes the numbers 1 to 24 in stylish circular frames, 3 stars in various sizes, 1 round tag die-cut with a hole as a background for the numbers.✨ Tip:Use glitter paper, metallic card or transparent film for festive effects – or layer the numbers with coloured backgrounds for a fantastic 3D look. The dies in this set come in the following sizesCircle for hanging (diameter approx. 3.2 cm)Circle with numbers (diameter approx. 2.8 cm)Star (approx. 1.4 x 1.3 cm)Star (approx. 2.0 x 1.9 cm)Star (approx. 2.9 x 2.8 cm)The idea for these dies came from Melanie Hoch, also known as Kreativsüchtig. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly intricate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 2 October 2026

With the stamp set ‘Taglayering – Christmas’ , you can create projects featuring modern and natural Christmas motifs. Delicate twigs, wreaths, fir trees, stars, snowflakes and decorative patterns can be combined in countless ways and stamped on top of one another in multiple layers. This allows you to create ever-changing festive designs.💡 Tip: Stamp the motifs in different shades, slightly offset or on top of one another. Layering looks particularly beautiful with natural shades of green and beige, as well as individual gold or black accents. Versatile motifs for creative Christmas projects. The stamps come in the following sizes:Twig (approx. 3.3 x 4.5 cm)Garlands (approx. 2.6 x 1.0 cm)Heart (approx. 0.5 x 0.7 cm)Snowflake (approx. 0.9 x 0.9 cm)Striped background (approx. 2.5 x 4.0 cm)Star (approx. 0.5 x 0.5 cm)Pine branch (approx. 2.3 x 3.8 cm)Wreath (diameter approx. 4.0 cm)Star (approx. 1.9 x 1.9 cm)Fir tree (approx. 1.5 x 1.9 cm)Snowflake (approx. 1.2 x 1.2 cm)Fir tree (approx. 1.9 x 2.9 cm)Fir tree (approx. 1.0 x 2.1 cm)Snowflake (approx. 1.7 x 1.7 cm)Wreath (diameter approx. 3.5 cm)Fir tree (approx. 3.3 x 5.1 cm)Sparkling star (approx. 0.3 x 0.5 cm)The illustrations for this set are by the lovely Carola, also known as Carolas Bastelstübchen. ✅ Product details: • Photopolymer stamp set on an A6 sheet • Precise lines & crisp stamping quality • Versatile for use on cards, gift wrapping, planners and more • Ideal for combining with other sets from our collection For particularly beautiful results, we recommend using VersaFine Clair ink pads. To get started straight away, please note: you’ll need a suitable acrylic block – this is not included. 💡 Looking for inspiration? Feel free to check out our [Design Team] or browse through our [Creative Collection] and [Pinterest board] – there you’ll find lots of great examples and ideas for this stamp set. 💕 📅 Published on: 2 October 2026