Stamp set - Designline - Carolas Weihnachtssprüche IV
€13.95
Available, delivery time: 5 days
Product information "Stamp set - Designline - Carolas Weihnachtssprüche IV"
The "Designline - Carolas Weihnachtssprüche IV" photopolymer stamp set
consists of 2 stamps on an A6 sheet.
A beautiful poem for your Christmas mail.
With this great saying you can quickly
Christmas cards, to the saying it needs
there is not much more to it.
The stamps in this set have the following sizes
Denkt euch, ich habe das
Christkind gesehen!
Es kam aus dem Walde,
das Mützchen voll
Schnee,
mit rotgefrorenem Näschen.
Die kleinen Hände taten
ihm weh,
denn es trug einen Sack,
der war gar schwer,
schleppte und polterte
hinter ihm her.
Was drin war, möchtet ihr
wissen?
Ihre Naseweise, ihr
Schelmenpack,
denkt ihr, er wäre offen
der Sack?
Zugebunden bis oben hin!
Doch war gewiss etwas
Schönes drin!
Es roch so nach Äpfeln
und Nüssen! (ca. 9,1 x 12,4 cm)
Anna Ritter (ca. 3,0 x 0,9 cm)
Carola from Carolas Bastelstübchen drew the illustrations for this set for us.
To use the stamps, you need acrylic blocks, which are not included in this offer.
We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.
In addition to the stamp set - Designline - Carolas Weihnachtssprüche IV we have other sets designed by artists. You can find them under the heading "Designline".
Published on: 09 December 2022
| Designer: | Carolas Bastelstübchen |
|---|
Mehr Weihnachtliches
Using the punch ‘Cookie Box – Large’ you can create a beautiful gift box for home-baked biscuits, little treats and sweet surprises. The individual die-cut pieces can be assembled into a practical box and decorated however you like. Ideal for Christmas, small gifts or thoughtful treats from the kitchen.💡 Tip: Make the box from sturdy cardstock and decorate it with festive lettering, ribbons or small tags. This turns your home-baked treats into a very special gift. The individual die-cut pieces have the following dimensions:Base (approx. 24.0 x 12.0 cm)Long side at the bottom (approx. 29.0 x 9.7 cm)Long side, top (approx. 29.1 x 6.0 cm)Short side, bottom (approx. 12.0 x 9.7 cm)Short side, top (approx. 12.1 x 6.0 cm)Top section (approx. 24.1 x 12.1 cm)Rectangle to be cut out (approx. 19.3 x 6.9 cm)The finished box measures approx. 24.1 x 12.1 x 8.0 cmThe idea for this box comes from the lovely Sandra, aka Papier und Passion. The die is made from 100% steel and fits all standard die-cutting and embossing machines when used with long cutting mats (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 15 November 2026
The "Bundle - Punch Set - Designline - Designline - Haus Stülpbox - Large" consists of a 2-piece punch set and a single punch.With this punch set you can create beautiful boxes in the shape of houses.Either you can take a closed lid or one with a window. The punches have the following sizes Bottom part (approx. 11,5 x 14,8 cm)Lid (approx. 11,8 x 15,1 cm)Lid with window (approx. 11,8 x 15,1 cm)Size of window (approx. 5,8 x 9,1 cm)The finished box measures approx. 7,8 x 11,6 x 2,0 cm.The idea for these punches come from dear Stephanie Kasper aka Papierschorsch. The punches work with standard punching and embossing machines (DieCut systems).You can use them for cardboard, felt, fabric, shrink wrap.Material: 100 % steelWe have collected many ideas for this bundle on our Pinterest pinboard and in our creative collection . Take a look and get inspired.Published on: 01 August 2023
Using the punch ‘Star Box – Large’ you can create a beautiful three-dimensional star-shaped gift box. The unique shape makes the box a real eye-catcher and offers space for small gifts, sweet surprises and thoughtful tokens. Ideal for Christmas, festive decorations or special occasions.💡 Tip: Make the Star Box from sturdy cardstock or elegant metallic paper and decorate it with small tags, bows or festivelettering. Several star boxes in coordinated colours look particularly lovely. The individual die-cuts have the following dimensions:Base (approx. 19.0 x 18.9 cm)Top section (approx. 20.0 x 20.0 cm)The die is made from 100% steel and fits all standard A4-format die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 11 November 2026
The "Bundle - Punch Set - Designline - Designline - Haus Stülpbox - Medium" consists of a 2-piece punch set and a single punch.With this punch set you can create beautiful boxes in the shape of houses.Either you can take a closed lid or one with a window. The punches have the following sizes Bottom part (approx. 9.7 x 12.7 cm)Lid (approx. 10.0 x 13.0 cm)Lid with window (approx. 10.0 x 13.0 cm)Size of window (approx. 5.0 x 7.9 cm)The finished box measures approx. 6.6 x 9.9 x 1.7 cm.The idea for these punches come from dear Stephanie Kasper aka Papierschorsch. The punches work with standard punching and embossing machines (DieCut systems).You can use them for cardboard, felt, fabric, shrink wrap.Material: 100 % steelWe have collected many ideas for this bundle on our Pinterest pinboard and in our creative collection . Take a look and get inspired.Published on: 01 August 2023
⭐✨🎄 A beautifully elegant star for the Christmas season 🎅❄️ - perfect for adding a festive eye-catcher to your decorations. Whether 5 points or 6 points, the star looks simply gorgeous ✨. 📌 Highlights: ⭐ Versatile: optionally with 5 or 6 points 🎄 Elegant design with inner star ✂️ 12 punched parts are required for 6 points 🌟 Perfect for window decorations, gifts or the Christmas tree 🎨 Creative ideas: 🎁 As a decorative tag for gift wrapping 🏡 For atmospheric home decorations - individually or as a set ✨ Particularly festive with glitter cardboard or transparent paper 🎄 Beautiful on the Christmas tree or in the window 👉 With the folding star with inner star - medium ⭐ you can conjure up an elegant and festive atmosphere for the most wonderful time of the year in no time at all ✨🎄.The punch measures approx. 32.5 x 22.5 cmA 6-pointed star measures approx. 65 cm. The punch is made of 100% steel and fits all standard A4 format punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest - why not take a look and get inspired! 📅 Published on: 03 October 2025
The Die - Fir tree fanfold brings a whole fir forest to your craft table 🎄. With just one punching process, you can create a row of fir trees that can be wonderfully unfolded, folded and further processed as a fanfold. Whether you use the trees as a background on cards, as standing table decorations, as a small winter landscape on packaging or for light and window decorations - the possibilities are almost limitless 💫. The clear, timeless fir tree design goes equally well with classic Christmas, Scandinavian and modern projects. With a little colour, glitter or artificial snow, the trees can be transformed into little winter dreams in no time ❄️ Design highlights: 🌲 Several fir trees in a continuous row (leporello look) 🎄 Ideal for folding, shortening, layering & decorating ✨ Perfect as a background or stand-alone decorative element 💎 Works great with kraft paper, glitter and metallic cardboard 💖 Perfectly suited for: 🎄 Christmas & winter cards 🎁 Gift wrapping & banderoles 🏠 Table and window decorations, small winter landscapes 📜 Scrapbooking, mini albums & mixed media projects ✨ S pecial features: ⭐ Punches several Christmas trees in one go 🎨 Versatile - from minimalist to playful 💎 Clean cuts for clear contours 💫 Can be ideally combined with house punches, stars & lettering With the Die - Christmas tree leporello, you can conjure up atmospheric winter worlds, cosy decorations and special card layouts in no time at all 💖. A must-have for anyone who loves fir trees, forest motifs and the magic of Christmas. ✨The punch has a size of approx. 29.4 x 11.5 cmThe folded Leporello has a size of approx. 9.8 x 11.5 cm. The punch is made of 100% steel and fits in all standard punching and embossing machines in Combination with long cutting plates (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 28. November 2025
🍂 Intricate trees for creative folding art With the "Autumn Tree Leporello" die-cutter, you can create impressive, interlinked tree motifs with fine, lifelike branches - perfect for folding cards, decorative elements or mini albums. The integrated leporello design creates a beautiful, three-dimensional row of trees that can be unfolded, set up or used as a continuous motif. Ideal for seasonal themes such as autumn, nature, forest or family, but also for year-round paper art projects with botanical flair. 🌟 Ideas for use Leporello cards with a tree landscape Autumn or nature themes for cards and albums Window decorations, paper silhouettes or table centrepieces Scrapbooking and mixed media projects 💡 Tip Combine different shades of paper in green, brown or gold to create natural colour gradients - this makes the branches look lively and three-dimensional.The punch has the following size approx. 29.5 x 12.2 cmWhen folded, the Leporello has a size of approx. 9.8 x 12.2 cm. The idea for this punch comes from Annika Flebbe aka Flebbeart. The punch is made of 100% steel and fits all standard punching and embossing machines in Combination with long cutting plates (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 12. December 2025
Die - Designline - Sternenschachtel The punching set is limited and only available while stocks last. A beautiful star box with three different motifs to close.The individual punches in this set have the following sizesBox (approx. 28.7 x 9.9 cm)Base (approx. 10.5 x 10.0 cm)Stars (each approx. 5.1 x 4.9 cm)The finished box has a size of approx. 8.9 x 8.4 x 3.7 cm) The idea for this punch is from the lovely Katharina aka Kathas.Atelier. The punch works with all standard punching and embossing machines in combination with long punching plates. (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and get inspired. Published on: 23. October 2024
The "Bundle - Punch Set - Designline - Designline - Haus Stülpbox - Small" consists of a 2-piece punch set and a single punch.With this punch set you can create beautiful boxes in the shape of houses.Either you can take a closed lid or one with a window. The punches have the following sizes Bottom part (approx. 8,0 x 10,3 cm)Lid (approx. 8,3 x 10,6 cm)Lid with window (approx. 8,3 x 10,6 cm)Size of window (approx. 4,1 x 6,5 cm)The finished box measures approx. 5,5 x 8,1 x 1,4 cm.The idea for these punches come from dear Stephanie Kasper aka Papierschorsch. The punches work with standard punching and embossing machines (DieCut systems).You can use them for cardboard, felt, fabric, shrink wrap.Material: 100 % steelWe have collected many ideas for this bundle on our Pinterest pinboard and in our creative collection . Take a look and get inspired.Published on: 01 August 2023
Die - Faltstern - 8 Zacken - 45 cm A beautiful folding star with 8 points. This is a wonderful way to decorate your home during the cosy Christmas season. First glue each individual point together on the long side and fold the small glue flaps outwards. Then press the individual points flat together and glue the small flaps of one point into a second point. Finally, fan out all the prongs and glue the last two tabs into the prong, preferably with hot glue. The punch measures approx. 18.9 x 21.0 cm. The finished star has a diameter of approx. 45 cm. The punch works with standard punching and embossing machines (DieCut systems) in A4 format. You can use it for cardboard, felt, fabric and shrink film . Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 04 October 2024
Die - Faltstern - 5 Zacken - 40 cmA beautiful folding star with 5 points. A wonderful way to decorate your home during the cosy cosy Christmas season. The punch has a size of approx. 21.6 x 23.7 cm. The finished star has a diameter of approx. 40 cm. The punch works with the standard punching and embossing machines (DieCut systems) in A4 format. You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 13. September 2024
⭐✨🎄 A beautifully elegant star for the Christmas season 🎅❄️ - perfect for adding a festive eye-catcher to your decorations. Whether 5 points or 6 points, the star looks simply gorgeous ✨. 📌 Highlights: ⭐ Versatile: optionally with 5 or 6 points 🎄 Elegant design with inner star ✂️ 12 punched parts are required for 6 points 🌟 Perfect for window decorations, gifts or the Christmas tree 🎨 Creative ideas: 🎁 As a decorative tag for gift wrapping 🏡 For atmospheric home decorations - individually or as a set ✨ Particularly festive with glitter cardboard or transparent paper 🎄 Beautiful on the Christmas tree or in the window 👉 With the folding star with inner star - medium ⭐ you can conjure up an elegant and festive atmosphere for the most wonderful time of the year in no time at all ✨🎄.The punch measures approx. 14.0 x 20.0 cm.A 6-pointed star measures approx. 39,5 cm. The punch is made of 100% steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 05 September 2025
Other crafters also bought
🖋️ The VersaFine Clair ink pad from Tsukineko is the perfect choice for detailed stamp impressions. Thanks to its special oil-based pigment ink, it ensures razor-sharp lines and a professional finish. 🖍️ Size: 📏 Pad size: 7.5 x 3.5 cm 📦 Overall size: 9.6 x 5.6 cm 💪 Material: Sturdy felt stamp pad with fabric cover 🌟 Outstanding features: ✅ Ideal for fine & detailed motifs 🎨 ✅ Waterproof after drying 💦 - perfect for watercolour techniques & alcohol markers Alcohol markers ✅ Suitable for various types of paper 📜 - especially on matt paper ✅ Long-lasting & productive ⏳ - No refill necessary thanks to airtight packaging 🔹 Long durability & maximum stamp impressions! The special composition of the ink ensures that this ink pad is extremely economical - according to the manufacturer, more stamp impressions than with any other ink pad! 💡 Note: Due to individual screen settings there may be colour deviations. 🎨🖥️
🖋️ The VersaFine Clair ink pad from Tsukineko is the perfect choice for detailed stamp impressions. Thanks to its special oil-based pigment ink, it ensures razor-sharp lines and a professional finish. 🖍️ Size: 📏 Pad size: 7.5 x 3.5 cm 📦 Overall size: 9.6 x 5.6 cm 💪 Material: Sturdy felt stamp pad with fabric cover 🌟 Outstanding features: ✅ Ideal for fine & detailed motifs 🎨 ✅ Waterproof after drying 💦 - perfect for watercolour techniques & alcohol markers Alcohol markers ✅ Suitable for various types of paper 📜 - especially on matt paper ✅ Long-lasting & productive ⏳ - No refill necessary thanks to airtight packaging 🔹 Long durability & maximum stamp impressions! The special composition of the ink ensures that this ink pad is extremely economical - according to the manufacturer, more stamp impressions than with any other ink pad! 💡 Note: Due to individual screen settings there may be colour deviations. 🎨🖥️
🖋️ The VersaFine Clair ink pad from Tsukineko is the perfect choice for detailed stamp impressions. Thanks to its special oil-based pigment ink, it ensures razor-sharp lines and a professional finish. 🖍️ Size: 📏 Pad size: 7.5 x 3.5 cm 📦 Overall size: 9.6 x 5.6 cm 💪 Material: Sturdy felt stamp pad with fabric cover 🌟 Outstanding features: ✅ Ideal for fine & detailed motifs 🎨 ✅ Waterproof after drying 💦 - perfect for watercolour techniques & alcohol markers Alcohol markers ✅ Suitable for various types of paper 📜 - especially on matt paper ✅ Long-lasting & productive ⏳ - No refill necessary thanks to airtight packaging 🔹 Long durability & maximum stamp impressions! The special composition of the ink ensures that this ink pad is extremely economical - according to the manufacturer, more stamp impressions than with any other ink pad! 💡 Note: Due to individual screen settings there may be colour deviations. 🎨🖥️
🖋️ The VersaFine Clair ink pad from Tsukineko is the perfect choice for detailed stamp impressions. Thanks to its special oil-based pigment ink, it ensures razor-sharp lines and a professional finish. 🖍️ Size: 📏 Pad size: 7.5 x 3.5 cm 📦 Overall size: 9.6 x 5.6 cm 💪 Material: Sturdy felt stamp pad with fabric cover 🌟 Outstanding features: ✅ Ideal for fine & detailed motifs 🎨 ✅ Waterproof after drying 💦 - perfect for watercolour techniques & alcohol markers Alcohol markers ✅ Suitable for various types of paper 📜 - especially on matt paper ✅ Long-lasting & productive ⏳ - No refill necessary thanks to airtight packaging 🔹 Long durability & maximum stamp impressions! The special composition of the ink ensures that this ink pad is extremely economical - according to the manufacturer, more stamp impressions than with any other ink pad! 💡 Note: Due to individual screen settings there may be colour deviations. 🎨🖥️
🖋️ The VersaFine Clair ink pad from Tsukineko is the perfect choice for detailed stamp impressions. Thanks to its special oil-based pigment ink, it ensures razor-sharp lines and a professional finish. 🖍️ Size: 📏 Pad size: 7.5 x 3.5 cm 📦 Overall size: 9.6 x 5.6 cm 💪 Material: Sturdy felt stamp pad with fabric cover 🌟 Outstanding features: ✅ Ideal for fine & detailed motifs 🎨 ✅ Waterproof after drying 💦 - perfect for watercolour techniques & alcohol markers Alcohol markers ✅ Suitable for various types of paper 📜 - especially on matt paper ✅ Long-lasting & productive ⏳ - No refill necessary thanks to airtight packaging 🔹 Long durability & maximum stamp impressions! The special composition of the ink ensures that this ink pad is extremely economical - according to the manufacturer, more stamp impressions than with any other ink pad! 💡 Note: Due to individual screen settings there may be colour deviations. 🎨🖥️