Stempelset - Kartendesign - Weihnachtsmotive

The "Hintergrund - Winterbeeren" stamp set is a photopolymer stamp measuring approximately 13.70 cm x 9.42 cm. It features a beautiful delicate background design for winter-themed cards or packaging. To use the stamps, you will need acrylic blocks, which are not included in this offer. We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired. Published on: August 1, 2021.

The "Kleine Weihnachtsmotive II" photopolymer stamp set consists of 26 stamps on a large A6 sheet.In this set you will find many small Christmas motifs that can be easily stamped again quickly on a gift tag or on aCard can be stamped who something is missing.You will find the following stamps on this stamp set:Flag: approx. 1.8cm x 0.9cmGift 1: about 2.5cm x 1.8cmGift 2: ca. 2,5cm x 1,4cmholly leaves: ca. 1,7cm x 1,5cmbanner: ca. 1,0cm x 5,5cmpendant: ca. 1,3cm x 2,9cmcandle 1: ca. 1,0cm x 2,0cmbranch 1: ca. 0,6cm x 1,7cmtwig 2: ca. 0,6cm x 1,8cmChristmas tree ball 1: ca. 1,0cm x 2,3cmsnow glass: ca. 1,4cm x 2,2cmcandle 2: ca. 0,9cm x 2,1cmbranch with leaves 1: ca. 0,5cm x 1,6cmbranch with leaves 2: ca. 0,7cm x 1,6cmstar 1: ca. 1,4cm x 1,2cmChristmas tree ball 2: ca. 1,0cm x 0,9cmfir tree: ca. 1,2cm x 1,8cmcap 1: ca. 1,3cm x 2,2cmcap 2: ca. 1,6cm x 2,1cmstar 2: ca. 1,0cm x 1,0cmcup 1: ca. 1,7cm x 1,4cmcup 2: ca. 1,6cm x 1,7cmcap 3: ca. 1,6cm x 2,2cmgloves: ca. 1,6cm x 2,8cmtwig with berries 1: ca. 1,0cm x 1,1cmbranch with berries 2: ca. 1,7cm x 1,9cmTo use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.You can find more sets in this series here.Published on: 01 August 2021

The "Wichtelgrüße" Photopolymer stamp set consists of 13 stamps on a large A6 sheet.Sweet greetings from the gnomes you will find in this set and their caps they just put down over the letters....You will find the following stamps on this stamp set:- Weihnachtszeit (mit Mütze)- Adventszeit (mit Mütze)- Feiertage (mit Mütze)- Weichnachten (mit Mütze)- Nikolaus (mit Mütze)- Festtage (mit Mütze)- Advent (mit Mütze)- Wichtelwunderland (mit Mütze)- Christkind (mit Mütze)- Fröhliche (ohne Mütze)- vom (ohne Mütze)- Frohe (ohne Mütze)- Glückliche (ohne Mütze)All stamp impressions are about 15mmm high and up to 95 mm long.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: 01 August 2021

Das “Mit ganz viel Herz" Photopolymer Stempelset besteht aus 11 Stempeln auf einem A6 Sheet. Liebe Grüße mit ganz viel Herzen verschicken - mit diesem Set kein Problem. Ein rechteckiger Stempel mit vielen Herzen und einer Reihe Platz in der Grüße eingesetzt werden können. Folgende Stempel findet ihr in diesem Set: Rechteckiger Stempel mit Herzen: ca. 8,5cm x 5,0cm Reihe mit 4 Herzrahmen: ca. 5,1cm x 1,1cm Reihe mit 4 Herzen: ca. 5,1cm x 1,1cm kleine Herzen: ca. 4,2cm x 1,4cm FÜR DICH HURRA GUTSCHEIN DU BIST TOLL MIT VIEL HERZ ETWAS HÜFTGOLD DU BIST EIN GOLDSTÜCK Damit die Stempel verwendet werden können benötigt Ihr Acrylblöcke, die nicht mit in diesem Angebot beinhaltet sind. Viele Ideen zu diesem Stempelset haben wir auf unserer Pinterest-Pinnwand und in unserer Kreativ-Sammlung zusammengetragen. Schaut doch mal vorbei und lasst Euch inspirieren.   Veröffentlicht am: 30. April 2021

Die "gepunktete Doodle Schneeflocke" ist ein toller Blickfang auf euren weihnachtlichen Projekten. Sei es eine Karte, ein Geschenkanhänger oder ein Layout - diese Schneeflockenstanze ist immer eine gute Wahl. Das Besondere bei dieser Stanze ist, das nichts ausgestanzt wird, sondern kleine Punkte in das das Papier gestochen (gepierct) werden. Du erhältst also kein Stanzteil, sondern es entsteht ein Muster auf dem Werkstück. Die Stanze hat einen ca. Durchmesser von 78 mm Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 06. August 2021

Die Wortstanze "Feiertage" ist eine schöne Ergänzung eures Bestandes an weihnachtlichen Basisstanzen. Kombiniert den Schriftzug einfach mit passenden Stempeln und gestaltet so wundervolle Weihnachtskarten. Die Stanze hat folgende Größe: 66 mm x 35 mm Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 06. August 2021

Ihr liebt es zum Nikolaustag kleine Präsente zu werkeln und schön zu verpacken? Oder ihr verschickt gern ein paar Nikolausgrüße per Post? Dann habt ihr mit dieser Wortstanze den perfekten Partner an eurer Seite. Die Stanze hat folgende Größe: 60 mm x 31 mm Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 06. August 2021

The "Winter - Misteltraum" photopolymer stamp setconsists of 10 stamps on a large A5 sheet.Mistletoe branches simply belong in the winter.So beautiful branches with small berriesfit into the cold season.In this set you will find a border, a frame,a background stamp, three single mistletoe branches,three small stars and the word "Winterzauber".You can use it to create magical cards and packagingfor the winter birthday children conjure.The individual stamps in this set have the following sizesBorder: approx. 13.7 x 1.6 cmFrame: approx. 9.8 x 7.0 cmBackground stamp: approx. 13.8 x 9.5 cmmistletoe 1: ca. 0,6 x 0,9 cmmistletoe 2: ca. 1,0 x 1,2 cmmistletoe 3: ca. 1,5 x 1,8 cmstar 1: ca. 0,2 x 0,2 cmstar 2: ca. 0,3 x 0,3 cmStar 3. ca. 0,5 x 0,5 cmWinter magic: ca. 6,4 x 1,2 cmThe best results are achieved with the VersaFine Clair stamp pads.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: December 17, 2021

The "Winter - Rahmenfreuden" photopolymer stamp setconsists of 14 stamps on a large A5 sheet.Beautiful small branches, umbels and flowers tosmall frames or wreaths are so beautiful.Now you can stamp such frames and wreaths alsostamp on your works.Dreamlike beautiful and delicate.Use the frames for example for layoutsin combination with pictures or youstamp them on cards with great greetings.The individual stamps in this set have the following sizesBorder: approx. 13,7 x 1,6 cmSquare frame: approx. 6.5 x 6.5 cmRound frame: Diameter approx. 6.5 cmRectangular frame: about 9.8 x 7.0 cmsmall pine branch: ca. 3,1 x 1,8 cmsmall berry branch: ca. 2,9 x 1,5 cmsmall cedar branch: ca. 2,8 x 1,3 cmbig pine branch: ca. 4,0 x 2,2 cmbig berry branch: ca. 4,5 x 2,4 cmbig cedar branch: ca. 3,5 x 1,7 cmumbel 1: ca. 0,6 x 0,6 cmumbel 2: ca. 0,9 x 0,9 cmumbel 3: ca. 0,9 x 0,9 cmumbel 4: approx. 1,3 x 1,3 cmThe best results are achieved with the VersaFine Clair stamp pads.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: December 25, 2021

The "Winter - Rahmenfreuden Ilex" photopolymer stamp setconsists of 12 stamps on a large A5 sheet.Beautiful green holly branches with the bright red berries,Are so beautiful eye-catchers in the dreary season.Stamped on cards and layouts they let yourWorks look very noble.Use the frames for example for layoutsin combination with pictures or youstamps them on cards with great greetings.The individual stamps in this set have the following sizesBorder: approx. 13.7 x 1.6 cmSquare frame: approx. 6.5 x 6.5 cmRound frame: Diameter approx. 6.5 cmRectangular frame: about 9.8 x 7.0 cmPine branch: ca. 3,9 x 2,1 cmBerry branch: ca. 4,5 x 1,8 cmtwig with two berries: ca. 1,0 x 1,3 cmsmall fine twig: ca. 3,5 x 1,8 cmbig fine branch: ca. 3,5 x 1,8 cmcedar branch 1: ca. 1,8 x 1,8 cmcedar branch 2: ca. 1,8 x 1,8 cmcedar branch 3: ca. 2,5 x 1,2 cmThe best results are achieved with the VersaFine Clair stamp pads.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: December 25, 2021

The "Winter - Traumhafte Zweige" photopolymer stamp setconsists of 9 stamps on a large A5 sheet.Beautiful fine branches combined with small berries andUmbels are so magical.The fine stamp impressions let your cards, packaging and layoutsand layouts look very noble.The individual stamps in this set have the following sizesBorder: approx. 13.7 x 1.6 cmRectangular frame: approx. 9.8 x 7.0 cmBackground stamp: approx. 13.8 x 9.5 cmcedar branch 1: ca. 1,8 x 2,4 cmcedar branch 2: ca. 1,8 x 2,5 cmsmall branch with berries: ca. 1,3 x 2,6 cmbig branch with berries: ca. 2,3 x 4,4 cmstar 1: ca. 0,6 x 0,6 cmstar 2: ca. 0,4 x 0,4 cmThe best results are achieved with the VersaFine Clair stamp pads.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.Published on: December 25, 2021

Mit unserer großen "Klassischer Tannenbaum - gepierct" Stanze lassen sich Briefe, Karten oder Boxen gestalten. Das besondere bei dieser Stanze ist, das nichts ausgestanzt wird, sondern kleine Punkte in das das Papier gestochen (gepierct) werden. Du erhältst also kein Stanzteil, sondern es entsteht ein Muster auf dem Werkstück. In diesem Fall ergeben die locker verteilten Punkte einen großen Tannenbaum. Klassischer Tannenbaum - gepierct ist ca. 10,53 cm hoch und 6,70 cm breit. Wer vermeiden möchte, dass sich der Rand der Stanze mit auf der Papier prägt, der kann beim Stanzen diese Prägematte verwenden. Bei uns hat es super funktioniert. Der Aufbau bei unserer Standard BigShot war wie folgt: Multipurpose Plattform, die Adapterplatten 1 und 2 aufklappen, die Stanzplatte auf die Plattform legen, dann die Stanze mit dem Muster nach oben auf die Stanzplatte legen. Auf die Stanzform das Papierstück, darauf die Prägematte, auf die Matte die nächste Stanzplatte und dann alles zusammen durch die Maschine kurbeln. Bei uns hat sich so der Rand der Stanze nicht mit eingeprägt. Die Pärgematte ist nicht Teil dieses Artikels, sie ist separat erhältlich. Achtung: Die kleinen Punkte zum Piercen des Papiers sind sehr spitz, bitte vorsichtig hantieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Inspirationen findet ihr bei Pinterest und in unserer Kreativsammlung. Mögt ihr unsere Stanze "Klassischer Tannenbaum - gepierct" aber wünscht euch ein anderes Design? Dann schaut euch mal DIESE Stanzen an. Veröffentlicht am: 01. August 2020

🩷 Filigree, versatile and beautiful - the Doilies Set 2 is the perfect addition to your creative stationery! With lovingly designed, detailed lace and wave shapes, this set brings romantic charm to any craft project. ✂️ Description The set contains several round doily motifs in different designs and sizes: Delicate wavy circles with soft contours Playful lace frame with flower motif Fine hole pattern doilies for elegant accents The clear red outlines are ideal for precise cutting with a plotter or die-cutting machine and ensure clean, detailed results. 💡 Application ideas Decorative elements for cards & scrapbooking Backgrounds for sayings, labels or mini pictures Gift packaging, tags or DIY table decorations Combine with other die-cutting sets (e.g. alphabets or numbers) for personalised designs ❤️ Special feature The Doilies Set 2 combines a classic lace look with modern lines - ideal for creative craft projects that combine elegance and craftsmanship. The individual punches have the following sizedoilies (diameter approx. 7.7 cm)doilies (diameter approx. 5.3 cm)doilies (diameter approx. 9.0 cm)The idea for this set comes from Andrea Moritz aka Frau Blütenstempel. The punch is made of 100% steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 26. December 2025

✨🎀This beautiful wreath decoration set brings festive elegance to all your projects 🎄💫. The detailed wreath forms the perfect basis for lovingly designed cards, packaging or layouts - a real eye-catcher for the Christmas season ❤️. Included are: 🌿 a beautiful wreath as the main motif 🎀 a large, elegant bow 🍒 small berries as playful accents ⭐ a pretty star for the final festive touch Whether classic, modern or playful - with the Decorate it - wreath decoration set punch you can conjure up atmospheric projects full of Christmas magic in no time at all ✂️✨. 👉 Perfect for cards 🎄, gift wrapping 🎁 or festive decorations 🕯️ - a must-have for anyone who wants to bring attention to detail to their Christmas creations ❤️The individual punches have the following sizesRibbon (approx. 2.5 x 2.7 cm)Star (approx. 1.1 x 1.0 cm)Small dots (diameter approx. 0.3 cm)Large dots (diameter approx. 0.5 cm)Wreath (approx. 3.6 x 3.6 cm) The punch is made of 100 % steel and fits all standard punching and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest - why not take a look and get inspired! 📅 Published on: 31. October 2025

⭐ Small pleated star pattern for impressive decoration ideas Use the "Pleated star small" punch to create impressive folding patterns that unfold into an elegant star. The sophisticated lines on the inside create a harmonious, rhythmic structure of diamond shapes when folded, which transform into the typical star look when folded. This punch is ideal for high-quality decorative objects, small paper stars, wall decorations or stylish room decorations - perfect for festive occasions, events and modern home accents. 💎 Elegant folded look for large star shapes The detailed structure of the die-cut pattern ensures: clean folded edges and precise symmetry a uniform star structure across the entire width a stable, fanned-out 3D result easy to assemble thanks to the integrated adhesive flap The combination of vertical and diagonal lines allows the paper to form an impressive star shape when fanned out. 🌟 Application ideas ✨ S mall window stars & hanging decorations Ideal for Christmas, winter decorations, weddings or parties. ✨ Wall and room decorations As a large-format eye-catcher above the dining table, in the living room or in a shop window. ✨ Light objects & paper lanterns Create beautiful lighting effects in combination with transparent paper. ✨ Scrapbooking & art journaling Also an exclusive texture and design accent when used flat. 💡 Tip For particularly elegant results, use: Tracing paper for glowing effects Metallic, mother-of-pearl or glitter paper for festive highlights Textured cardboard for a three-dimensional, handmade look Gently fanning out creates a large, three-dimensional star shape that captures and reflects light beautifully. The punch measures approx. 25.7 x 6.0 cm. The punch is made of 100% steel and fits all standard punching and embossing machines in Combination with long cutting plates (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for: ✔ ️ card ✔ ️ felt ✔ ️ fabric ✔ ️ shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired! 📅 Published on: 08 December 2025

Practical. Sturdy. Beautifully packaged. 💛 With the large folding carrier box, you can create a high-quality box with a carrying handle in no time at all, which is perfect for small gifts, souvenirs and creative surprises. 🎁🤍 Packaging with a wow effect This box is not just packaging - it's a real highlight! The clever folding system creates a stable shape that is wonderful to carry and give as a gift 🧺✨ Ideal for: 🍪 biscuits & small treats little treats 🕯️ Candles & decorative items 🧴 Cosmetics & wellness gifts 🎀 Small sets & craft surprises 💌 Cards, vouchers & personalised greetingspersonal greetings ✂️🛠️ What to expect 🧺 large carrying box for folding & gluing 📐 Punch in large format - perfect for special gifts ✨ integrated folding lines for easy assembly 🎨 perfect for stamping, gluing & decoratingDecorating 💛 stable & versatile 💌🌿 Perfect for 🎁 Gifts & souvenirs 🎄 Christmas & Advent 🎉 Birthdays & celebrations 👶 Baby gifts & small sets small sets 🏷️ DIY packaging for workshops or markets 💡 Tip: Decorate the box with labels, ribbons, Labels, ribbons, stamped sayings or small tags - this turns the packaging into a real designer piece 🎀✨ With the Die - Folding carrier box large, you can package with style and lots of love 🧺💛 Simply create, fill and give away! ✨ The individual punches have the following sizesBase (approx. 12.5 x 7.2 cm)Side without closure (approx. 20.8 x 21.5 cm)Side with closure (approx. 20.8 x 29.5 cm)The finished carrier box has a size of approx. 12.5 x 7.2 x 20.3 cm The punch is made of 100% steel and fits in all standard punching and embossing machines in A4 format (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways - it is suitable for, among other things suitable for: ✔ ️card ✔ ️felt ✔ ️fabric ✔ ️shrink film 💡 Tip: For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid. 📌 Looking for inspiration? We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - take a look and get inspired! 📅 Published on: 21. January 2026