Skip to main content Skip to search Skip to main navigation

Product information "Die - Mini Häuser mit Herz - Nur noch so lange der Vorrat reicht"

Die Stanze "Mini Häuser mit Herz" ist der kleine Bruder zu unserer "Häuser mit Herz Stanze". Mit diesen Mini Häuschen lassen sich super Geschenkanhänger verzieren. Toll sind sie auch als Deko für ausgestanzte Kränze.

Haus 1 ist 1,21 cm breit und 1,99 cm hoch
Haus 2 ist 1,49 cm breit und 1,68 cm hoch
Haus 3 ist 1,52 cm breit und 1,81 cm hoch

Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen).
Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie.

Inspirationen findet ihr auf Pinterest und in unserer Kreativsammlung.

Für ein besseres Stanzergebnis die Stanzen von dem Gebrauch trennen. Den Link zu einer Anleitung dazu findet Ihr einen Absatz weiter unten.

Achtung: Diese Stanze ist ein Set aus 3 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend.

Material: 100% Stahl
Made in USA

Wenn euch die Stanzen "Mini Häuser mit Herz" gefallen, schaut euch auch unsere kleinen Medaillons an. Diese findet ihr HIER.

Veröffentlicht am: 01. August 2020

Our recommendation for you

%
Die - Decorate it - Kamindeko - Häuser
Die - Decorate it - Kamindeko - Häuser Cute little houses that can be wonderfullylined up on the fireplace.The individual punches in this set have the following sizes House approx. 1.3 x 2.6 cm House approx. 1.1 x 2.1 cm House approx. 0.9 x 2.5 cm House approx. 1.5 x 2.0 cm The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and get inspired. Published on: 18. December 2024

€4.11* €4.95* (16.97% saved)
%
Die - Haus Duo Sternenpracht - Nur noch so lange der Vorrat reicht
Die - Haus Duo Sternenpracht: Ein 2er Set. Aus dem einen Haus wird in der Mitte ein Stern ausgestanzt, bei dem zweiten Haus werden 6 verschieden große mehrzackige Sterne eingeprägt. Es ist auf all euren weihnachtlichen Projekten ein wunderschönes Detail. Die Prägung könnt ihr mit Stempelfarbe noch zusätzlich hervorheben, indem ihr vorsichtig mit einem Schwämmchen nach dem Prägevorgang über die Erhebungen streicht. In den Beispielen findet ihr erste Anregungen von unserem Designteam. Jedes einzelne Haus ist ca. 3,68 cm hoch und ca. 2,43 breit. Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Achtung: Diese Stanze ist ein Set aus 2 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Neben der "Die - Haus Duo Sternenpracht" haben wir weitere Produkte mit Hausmotiv im Shop. Diese findet ihr HIER. Veröffentlicht am: 27. September 2019

€7.43* €8.95* (16.98% saved)
%
Die - Mini Anhänger II
Die - Mini Anhänger II: With these dies, you can create designs on letters, cards, or boxes. You will receive a set of 4 (ultra) small pendant dies, designed to decorate your cards. This way, you can punch out small decorations from color-coordinated paper for your craft project. The punched-out eyelet allows our 0.3mm thread to be easily threaded, and with a steady hand, the 0.5mm thread can also fit through. Mini Circle Pendant: approximately 1.15cm wide and 1.40cm tall (with pop-up hearts) Mini House Pendant: approximately 0.85cm wide and 1.50cm tall (with pop-up stars) Mini Fir Tree Pendant: approximately 0.51cm wide and 1.75cm tall Mini Star Pendant: approximately 1.10cm wide and 1.60cm tall We have gathered many great ideas for using this die on Pinterest and in our creative collection. Take a look and get inspired. The die works with common die-cutting and embossing machines (DieCut systems). You can use it on cardboard, felt, fabric, and shrink film. For better die-cutting results, separate the two dies before using. You will find a link to a tutorial for this a paragraph below. Attention: This die is a set of 4 individual dies connected by fine metal tabs. These tabs can be easily separated using a side cutter to obtain the individual die shapes. Marion has also written a small guide on how to separate the tabs best, which you can find HERE. Material: 100% steel Made in USA If you like the "Die - Mini Pendants II", check out our small medallions as well. You can find them HERE. Published on: August 1, 2019  

€4.11* €4.95* (16.97% saved)
%
Die - Mini Anhänger Glück
The mini pendants luck: the 4 small luck pendants with a maximum height of 16 mm are perfect little eye-catchers on cards and on boxes. Soon you will also find examples from our design team. In our creative collection and on Pinterest we have collected many great ideas for this punch. Take a look and let yourself be inspired. For a better punching result, separate the two punches from the use. You can find the link to instructions on how to do this one paragraph below. Note: This punch is a set of several individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual die cuts. Marion also wrote a little tutorial HERE on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100% steel Made in USA Published on: 10. March 2021

€6.60* €7.95* (16.98% saved)
%
Die - Kranz mit Haus
Die - Kranz mit HausA beautiful wreath with twigs, stars and a hanging house.A great decoration set in a frame .The die-cut has a size of approx. 11.5 x 9.9 cm The idea for this die-cutting set is from the lovely Steffi from StilfeinDesign_kreativ. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 20. December 2024

€12.41* €14.95* (16.99% saved)