Die - Großes Ticket Trio

The "Designline - Großes Ticket - Save the Date" photopolymer stamp setconsists of 27 stamps on an A5 sheet. A great, extensive set for ourlarge ticket punches.So that are very quickly great vouchersor invitation gewerkelt.  The stamps have the following sizes BOARDING (ca. 7,5 x 1,0 cm)PASS (ca. 3,8 x 1,1 cm)Ticket (ca. 4,5 x 1,1 cm)Pass (ca. 3,4 x 4,6 cm)Boarding (ca. 7,0 x 2,3 cm)Ticket (ca. 4,1 x 2,3 cm)VIP (ca. 3,0 x 1,1 cm)Name (ca. 1,9 x 0,7 cm)Datum (ca. 2,0 x 0,8 cm)am (ca. 0,9 x 0,6 cm)Zeit (ca. 0,8 x 0,8 cm)um (ca. 0,8 x 0,6 cm)Ort (ca. 1,1 x 0,8 cm)Wo (ca. 1,2 x 0,8 cm)DANKE (ca. 6,2 x 1,8 cm)Save the Date (ca. 5,9 x 1,8 cm)HERZLICHEN Glückwunsch (ca. 7,3 x 2,3 cm)AUSZEIT (ca. 3,5 x 1,5 cm)Einladung (ca. 7,6 x 2,0 cm) small flower (ca. 0,5 x 0,6 cm) mini heart (ca. 0,5 x 0,2 cm)star (ca. 0,5 x 0,5 cm)medium heart (ca. 0,8 x 1,0 cm)paper plane (ca. 1,0 x 0,9 cm)heart with arrow (ca. 4,0 x 0,9 cm)big heart (ca. 2,5 x 2,8 cm)barcode (ca. 5,0 x 1,0 cm) This set has the dear Sandra of paper and passion designed for us.The stamps fit for our punches "Large Ticket Trio"So that the stamps can be used you need acrylic blocks, which are not included in this offer.Many ideas for this stamp set we have on our Pinterest board and in our creative collection collected. Take a look and get inspired.In addition to the stamp set - Designline - Großes Ticket - Save the Date we have other sets designed by artists. You can find them under the heading"Designline".Published on: 09 December 2022

Die - Großes Ticket SetLarge tickets that can be designed really greatas a gift certificate andgive away.With the size fit manywishes on it ;-)The punches have a size of about 13.4 x 6.0 cm. The punch works with standard punching and embossing machines (DieCut systems).You can use them for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 09 December 2022

Die - Ticketstanzen - für Umschlag: With this set you have two great overlays and a large ticket that fits the "Envelope for ticket punches" A cool idea to give away for example tickets for concerts or for the cinema.  The punches have the following sizes Overlay 1 (approx. 5.5 x 13.2 cm) Overlay 2 (approx. 6.3 x 13.2 cm) large ticket (approx. 5.0 x 12.2 cm) The punch works with all common punching and embossing machines (DieCut systems).You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: July 01, 2022

Die - Umschlag für Ticketstanzen: A beautiful elongated envelope in which you quite a few vouchers can give away. Matching the envelope we have cool ticket punches. The punch has a size of about 13.1 x 18.9 cm. The finished envelope is approximately 6.8 x 13.1 cm. The punch works with standard punching and embossing machines (DieCut systems).You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: July 01, 2022

Die - Designline - Umschlag mit ReißkanteA great envelope in the great cardsor voucher beautifully packaged can be.To open you can then use thecool tear edge.The punch has a size of about 20.0 x 20.5 cmThe finished envelope has a size of about 13.0 x 9.4 cm. The idea for this punch set comes from the lovely Anni from  Flebbeart. The punch works with the common punching and embossing machines (DieCut systems) in A4 format. You can use it for cardboard, felt, fabric, shrink film.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 01 August 2023

Die - Mini Anhänger II: With these dies, you can create designs on letters, cards, or boxes. You will receive a set of 4 (ultra) small pendant dies, designed to decorate your cards. This way, you can punch out small decorations from color-coordinated paper for your craft project. The punched-out eyelet allows our 0.3mm thread to be easily threaded, and with a steady hand, the 0.5mm thread can also fit through. Mini Circle Pendant: approximately 1.15cm wide and 1.40cm tall (with pop-up hearts) Mini House Pendant: approximately 0.85cm wide and 1.50cm tall (with pop-up stars) Mini Fir Tree Pendant: approximately 0.51cm wide and 1.75cm tall Mini Star Pendant: approximately 1.10cm wide and 1.60cm tall We have gathered many great ideas for using this die on Pinterest and in our creative collection. Take a look and get inspired. The die works with common die-cutting and embossing machines (DieCut systems). You can use it on cardboard, felt, fabric, and shrink film. For better die-cutting results, separate the two dies before using. You will find a link to a tutorial for this a paragraph below. Attention: This die is a set of 4 individual dies connected by fine metal tabs. These tabs can be easily separated using a side cutter to obtain the individual die shapes. Marion has also written a small guide on how to separate the tabs best, which you can find HERE. Material: 100% steel Made in USA If you like the "Die - Mini Pendants II", check out our small medallions as well. You can find them HERE. Published on: August 1, 2019  

Die - Medi Anhänger - Hintergrund: Mit diesen Stanzen könnt ihr euch aus Designpapier oder unifarbenem Cardstock den passenden Hintergrund für unsere Medi-Anhänger ausstanzen. Medi Kreis Anhänger: ca. 3,00 cm breit und 2,74 cm hoch Medi Quadrat Anhänger: ca. 3,04 cm breit und 2,77 cm hoch Medi Rechteck Anhänger: ca. 3,76 cm breit und 2,77 cm hoch Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Für ein besseres Stanzergebnis die Stanzen von dem Gebrauch trennen. Den Link zu einer Anleitung dazu findet Ihr einen Absatz weiter unten. Achtung: Diese Stanze ist ein Set aus 3 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Material: 100% Stahl Made in USA Inspirationen findet ihr bei Pinterest und in unserer Kreativsammlung. Wenn euch die Stanzen "Medi Anhänger - Hintergrund" gefallen, schaut euch unsere anderen Medi-Anhänger an. Diese findet ihr HIER. Veröffentlicht am: 24. Juni 2020