Creative-Depot

Die - Designline - Breiter Anhänger mit Stern

€14.95

Available, delivery time: 5 days

Product number: CD-Di-670

Weight: 0.023 kg

Die - Designline - Breiter Anhänger mit Stern. Details can be found below.

HERE you will find our Angel Policy.

Product information "Die - Designline - Breiter Anhänger mit Stern"

"Die - Designline - Breiter Anhänger mit Stern"

A beautiful wide rectangular pendant with a small star in the lower right corner, make your gifts special.

Also in the set are one square and one round hole punch each.

The punches have the following sizes:

Width pendant (approx. 5.0 x 8.9 cm)
square hole punch (approx. 2.4 x 5.9 cm)
round hole punch (approx. 1.3 cm in diameter)

The design for these punches comes from dear Sandra Möller of Papier und Passion.

For a better punching result please separate the punches before use. You will find the link to a tutorial one paragraph below.

Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies. HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too.

The punch works with all common die cutting and embossing machines (DieCut systems).

You can use it for cardboard, felt, fabric, shrink wrap.

Material: 100 % steel
Made in USA

We've collected lots of great ideas for this punch on Pinterest and in our creative collection .
Take a look and get inspired.

Published on: 17. June 2022

Other crafters also bought

Die - Designline - Breiter schlichter Anhänger

"Die - Designline - Breiter schlichter Anhänger" A beautiful wide plain pendant with plenty of space for dear greetings on your gifts. In the set are still one square and one round hole punch and one rectangle. The punches have the following sizes: Pendant (approx. 5.0 x 9.0 cm) square hole punch (approx. 2.5 x 5.0 cm) round hole punch (approx. 1.3 cm diameter) Rectangle (approx. 4.0 x 4.5 cm) The design for these punches comes from dear Sandra Möller of Paper and Passion. Unfortunately, a wrong inlay was added to the punch during production.For a better punching result, please separate the punches before use. You will find the link to a tutorial one paragraph below. Attention: This punch is a set of individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual dies. HERE Marion has also written a little tutorial on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common die cutting and embossing machines (DieCut systems). You can use it for cardstock, felt, fabric, shrink wrap. Made from 100% steel We've collected lots of great ideas for this punch on Pinterest and in our creative collection .Take a look and get inspired. Published on: 15. July 2022

€14.95

Stamp set - Designline - Grüße vom Nordpol

The "Designline - Grüße vom Nordpol" photopolymer stamp setconsists of 12 stamps on a large A5 sheet.A letter with greetings from the North Pole from Knecht Ruprecht - whether there are presentsdepends on whether you were good or naughty.or naughty.Just turn the stamp "Hohoho" around,then it can be used perfectly for Halloween ;-)In this stamp set you will find the following stamps:Information für Knecht Ruprecht (ca. 6,0 x 12,4 cm)Frohe Weihnachten (ca. 3,5 x 3,8 cm)Ranken größer (je ca. 1,6 x 0,3 cm)Ranken kleiner (je ca. 1,3 x 0,25 cm)Post vom Nordpol (ca. 4,6 x 3,4 cm)Rentierpost (ca. 5,4 x 1,2 cm)Lichterkette (ca. 6,0 x 1,0 cm)Santa Claus (ca. 4,4 x 1,8 cm)merry christmas (ca. 6,0 x 1,6 cm)HOHOHO (ca. 4,4 x 1,1 cm)The illustrations for this set are from dear Anni from Flebbeart.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.In addition to the stamp set - Designline - Grüße vom Nordpol, we have other sets designed by artists. You can find them under the heading "Designline".Published on: September 16, 2022

€21.95

Stamp set - Designline - Eleganter Adventskalender

The "Designline - Eleganter Adventskalender" photopolymer stamp setconsists of 26 stamps on a large A6 sheet.Very simple numbers in two differentSizes you will find in this set.With the small ChristmasSigns can be very greatAdvent calendar tags conjure up.The numbers let them but also forBirthday cards or cards forwedding anniversaries use.The stamps in this set have the following sizesThe large numbers have a height of about 1.7 cm.The small numbers have a height of about 1.1 cmSign with eight-pointed star (approx. 2.6 x 2.9 cm)tag with heart (ca. 2,6 x 2,9 cm)tag with star (ca. 2,6 x 2,9 cm)tag with fir trees (ca. 2,6 x 3,0 cm)The illustrations for this set were drawn for us by Sandra from Papier & Passion.To use the stamps you need acrylic blocks, which are not included in this offer.We have collected many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and get inspired.In addition to the stamp set - Designline - Eleganter Adventskalender, we have other sets designed by artists. You can find them under the heading "Designline".Published on: September 30, 2022

€13.95

Die - Designline - Anhänger für Nordpol Stempel

Die - Designline - Anhänger für Nordpol Stempel Here you will find the matching punch set for the stamp set"Greetings from the North Pole". A great pendant punch on which thestamps can be perfectly placed.The punches have the following sizes Pendant punch (approx. 7.0 x 14.0 cm)Rectangle (approx. 5.4 x 4.7 cm) The illustrations for this set are by dear Anni from Flebbeart. The punch works with the common punching and embossing machines (DieCut systems). You can use it for cardstock, felt, fabric, shrink wrap. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 25. January 2023

€15.95

Die - Designline - Sandras Deko Tannenbäume

Die - Designline - Sandras Deko Tannenbäume A very magical set with which you can create beautiful Christmas decorations in the form of garlands or table decorations. The punches in this set have the following sizes Fir tree with trunk (approx. 5,7 x 12,0 cm) small fir tree frame (approx. 5.4 x 7.6 cm) big fir tree - frame (ca. 9,4 x 13,1 cm) The idea for this punch set comes from dear Sandra aka Papier und Passion. The punch works with the common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 11. November 2022

€17.95

Die - Designline - Hülle breite Tags

Die - Designline - Hülle breite TagsA great punch set to create beautiful envelopes for the wide tags . So you can easily hide and give away small surprises quite . The punches and finished envelopes have the following sizes Envelope 1 (approx. 12.0 x 7.0 cm) (approx. 5.2 x 7.0 cm) Envelope 2 (approx. 12,0 x 6,0 cm) (approx. 5,3 x 6,0 cm) Envelope 3 (approx. 12.0 x 8.0 cm) (approx. 5.3 x 7.0 cm) The design for these punches comes from the dear Sandra Möller of Paper and Passion.The punch works with standard punching and embossing machines (DieCut systems).You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch.Take a look and get inspired. Published on: 28. October 2022

€19.95