Stempelset - Designline - Lichtbotschaften - Herzen - Nur noch so lange der Vorrat reicht
€21.95
Available, delivery time: 5 days
Product information "Stempelset - Designline - Lichtbotschaften - Herzen - Nur noch so lange der Vorrat reicht"
Das “Designline - Lichtbotschaften - Herzen" Photopolymer Stempelset
besteht aus 10 Stempeln auf einem großen A5 Sheet.
Wunderschöne Lichtbotschaften für Teelichter.
Zaubert euren Herzensmenschen mit diesen Botschaften
ein Lächeln ins Gesicht.
Ihr stempelt den Text auf Seidenpapier oder Cardstock und
stanzt ihn passend aus. Anschließend nehmt
ihr den Docht aus dem Teelicht, ihr fädelt den Docht
durch den ausgestanzten Kreis und setzt das Teelicht
wieder drauf.
Wenn das Teelicht angezündet wird und das Wachs
geschmolzen ist, kann man die Botschaft lesen.
Die einzelnen Stempel haben folgende Größen
- Herzenslicht FÜR DICH (ca. 8,5 x 2,5 cm)
- Kerze anzünden und auf die kleine Botschaft freuen. (ca. 5,4 x 1,7 cm)
- EIN (ca. 1,3 x 0,6 cm)
- von Herzen ♥ (ca. 4,4 x 3,0 cm)
- Schön DASS ES DICH GIBT (ca. 3,7 x 3,4 cm)
- HERZENSBotschaft (ca. 4,6 x 2,4 cm)
- HerzensMENSCH (ca. 4,5 x 2,7 cm)
- gepunktetes Herz (ca. 3,7 x 3,2 cm)
- DU BIST toll (ca. 3,7 x 3,2 cm)
- Herzenslichter (ca. 9,1 x 2,1 cm)
Die passenden Teelichtstanzen findet ihr HIER.
Die Illustrationen für dieses Set hat Steffi von StilfeinDesign_kreativ für uns gezeichnet.
Damit die Stempel verwendet werden können benötigt Ihr Acrylblöcke, die nicht mit in diesem Angebot beinhaltet sind.
Viele Ideen zu diesem Stempelset haben wir auf unserer Pinterest-Pinnwand und in unserer Kreativ-Sammlung zusammengetragen. Schaut doch mal vorbei und lasst Euch inspirieren.
Veröffentlicht am: 25. Dezember 2022
| Designer: | Stilfein Design |
|---|
Mehr Herzen & Sterne
With this die, you can create a small three-dimensional paper star. The individual points of the star are folded and glued into the designated openings on the base – gradually forming the three-dimensional star shape. Whether as a Christmas tree decoration, a pendant or a lovely touch on a gift wrap, it adds a festive touch.💡 Tip: Carefully crease all the fold lines in advance and allow the glued points to dry thoroughly in between. It’s best to attach a loop for hanging before you assemble the star completely. The individual die-cut pieces have the following dimensions:^Base shape (approx. 18.0 x 8.8 cm)Star point (approx. 8.7 x 8.8 cm)The finished star measures approx. cmThe die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it is suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 13 November 2026
With this die, you can create a three-dimensional paper star. The die-cut pieces are folded and assembled into a three-dimensional star. Whether as a hanging decoration, a window display or a special touch on a present – the star will bring a festive atmosphere to your Christmas decorations.💡 Tip: Carefully crease the fold lines before gluing the pieces together. If you want to hang the star up, attach a loop of string before closing it completely. The individual die-cuts are the following sizesBase shape (approx. 13.0 x 5.6 cm)Star point (approx. 13.7 x 13.8 cm)The finished star measures approx. cmThe die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it is suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 11 November 2026
With this die-cut, you can create a large, three-dimensional paper poinsettia. The individual points are folded and glued to the designated openings on the base. The result is a three-dimensional star that adds a festive touch to your Christmas décor, whether as a window decoration, a free-hanging ornament or an eye-catching centrepiece.💡 Tip: Use sturdy paper that folds well and carefully crease the lines beforehand. The star looks particularly timeless in white or natural shades – whilst shimmering paper gives it a festive sheen. The individual die-cut pieces have the following dimensions: Base shape (approx. 18.5 x 8.0 cm) (cut out 5 times)Star tip (approx. 19.3 x 19.5 cm) The finished star measures approx. cm The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 13 November 2026
Mit dem Stempelset „Sternenstempel für Standard Anhänger“ gestaltest du wunderschöne Sternenmuster auf deinen Anhängern. Die unterschiedlichen Sternenbordüren und einzelnen Sterne lassen sich vielseitig kombinieren und verleihen deinen Geschenkanhängern, Karten und Verpackungen eine festliche Note.💡 Tipp:Kombiniere die Sternenmotive mit der passenden Stanze „Standard Anhänger“ und gestalte individuelle Anhänger. Besonders schön wirken die Sterne in Gold, Silber oder klassischem Schwarz auf farbigem Papier. Die einzelnen Stempel haben folgende Größen:Stern (ca. 0,6 x 0,6 cm)Stern (ca. 0,6 x 0,6 cm)Streifen mit Sternen (ca. 1,6 x 9,3 cm)Stempel für Anhänger (ca. 4,2 x 7,8 cm)✅ Produktdetails: • Photopolymer-Stempelset auf A7 Sheet • Präzise Linienführung & klare Abdruckqualität • Vielseitig einsetzbar für Karten, Verpackungen, Planer & mehr • Ideal kombinierbar mit anderen Sets aus unserer Kollektion Für besonders schöne Ergebnisse empfehlen wir die Verwendung der VersaFine Clair Stempelkissen. Damit du sofort loslegen kannst, denk bitte daran: Zur Anwendung benötigst du einen passenden Acrylblock – dieser ist nicht im Lieferumfang enthalten. 💡 Inspiration gesucht? Schau gerne bei unserem [Designteam] vorbei oder lass dich durch unsere [Kreativsammlung] und [Pinterest-Pinnwand] treiben – dort findest du viele tolle Beispiele & Ideen rund um dieses Stempelset. 💕 📅 Veröffentlicht am: 13. November 2026
Using the die-cut ‘Standard Tag Topper – Star Duo’ you can create beautiful tags with a modern star design. The decorative tag featuring two stars is complemented by two additional stars in different sizes, offering a wide range of design possibilities. Ideal for Christmas presents, small gifts and festive packaging.💡 Tip: Combine the topper and place the stars on coloured or glittery paper. The additional stars can be beautifully highlighted using adhesive foam pads, creating lovely 3D effects. The individual die-cuts are as follows:Topper (approx. 6.5 x 11.0 cm)Star (approx. 5.0 x 4.7 cm)Star (approx. 3.2 x 3.1 cm)The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 13 November 2026
Using the die-cut ‘Decorate it – Stamps – Stars’ you can create beautiful festive details. The stars, which come in different sizes with their simple and delicate designs, can be combined in many different ways and add a special touch to stamps, Christmas cards, gift tags and packaging.💡 Tip: Combine the stars with the punches ‘Stamp Tear-Off Sheets with Overlays I and II’ and the other ‘Decorate it – Stamps’ punches’. The stars look particularly beautiful when made from gold, silver or glitter paper, creating sparkling highlights.The individual punches are available in the following sizes:Star (approx. 0.9 x 0.9 cm)Star (approx. 0.5 x 0.5 cm)Star (approx. 2.3 x 2.2 cm)Star (approx. 1.4 x 1.4 cm)Star (approx. 1.1 x 1.1 cm)Star (approx. 0.6 x 0.6 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – why not have a look and get inspired! 📅 Published on: 13 November 2026
With our large "Die - Skandinavischer Stern - Hintergrund" punch can be conjured up a simple and elegant background on a card. The special thing about this punch is that nothing is punched out, but small dots are pierced into the paper. So you don 't get a punched part, but a pattern is created on the workpiece. In this case, the dots make the outline of several hearts arranged in a circle. Scandinavian star - background is about 10.17 cm high and 10.12 cm wide. If you want to avoid that the edge of the punch also embosses on the paper, you can use this embossing mat when punching. It worked great for us. The setup on our standard BigShot was as follows: Multipurpose platform, unfold adapter plates 1 and 2, place the die cut plate on the platform, then place the die cut with the pattern facing up on the die cut plate. On top of the die cut the paper piece, on top of that the embossing mat, on top of the mat the next die cut plate and then crank everything together through the machine. In our case, the edge of the die cut did not imprint. The piercing mat is not part of this article, it is sold separately. Note: The small dots for piercing the paper are very sharp, please handle with care. The punch works with standard die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap. Material: 100% steel Made in USA We've collected lots of great ideas for this punchon Pinterest and in our creative collection . Take a look and get inspired. Do you like our punch "Die - Skandinavischer Stern - Hintergrund" but want a different design? Then take a look at THIS punch. Published on: August 01, 2020
"Die - Hängende Sterne": Here you get a beautiful star garland that can be used for all sorts of occasions. Be it as a base for Christmas projects, or as a detail that makes your card a feast for the eyes. The punch has the following size: approx. 90 mm x 64 mm On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. The punch works with all standard die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap. Material: 100% steel Made in USA Published: August 06, 2021
The - Schneeflockenherz - negative is a set of 2 punches. The punch cuts out the paper and leaves a heart with snowflake pattern standing as a negative. You will not receive a die cut design, but a die cut in the negative. Snowflake heart - negative - large is approx. 5.75 cm high and approx. 4.69 cm wide Snowflake heart - negative - small is approx. 2.74 cm high and approx. 2.24 cm wide Note: This punch is a set of 2 individual punches that are connected with fine metal bars. These can be easily separated with a side cutter to get the individual die cuts. Marion also wrote a little tutorial HERE on how to best separate the bars. Be careful when separating the bars, they like to bounce around too. The punch works with all common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap. Material: 100% steel Made in USA We've collected lots of great ideas for this punchon Pinterest and in our creative collection . Take a look and get inspired. Do you like our punch "Snowflake heart - negative" but want a different design? Then take a look at THIS punch. Published on: August 01, 2020
Mit unserer große "Kartenaufleger - Streupunkte - Stern" lassen sind besondere Effekte für eine Karte erzielen. Ausgestanzt wird ein Kartenaufleger in Recheckform, bei dem kleine Punkte ein Muster in das das Papier stechen (piercen). In diesem Fall ergeben locker verteilte Punkte eine Sternform. Die Stanze ist ca. 14,80 cm hoch und 10,50 cm breit. Achtung: Die kleinen Punkte zum Piercen des Papiers sind sehr spitz, bitte vorsichtig hantieren. Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Inspirationen findet ihr bei Pinterest und in unserer Kreativsammlung. Veröffentlicht am: 01. August 2020
Using the punch ‘Star Box – Large’ you can create a beautiful three-dimensional star-shaped gift box. The unique shape makes the box a real eye-catcher and offers space for small gifts, sweet surprises and thoughtful tokens. Ideal for Christmas, festive decorations or special occasions.💡 Tip: Make the Star Box from sturdy cardstock or elegant metallic paper and decorate it with small tags, bows or festivelettering. Several star boxes in coordinated colours look particularly lovely. The individual die-cuts have the following dimensions:Base (approx. 19.0 x 18.9 cm)Top section (approx. 20.0 x 20.0 cm)The die is made from 100% steel and fits all standard A4-format die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: ✔ ️ Cardboard ✔ ️ Felt ✔ ️ Fabric ✔ ️ Shrink film 💡 Tip: For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 11 November 2026
Hotfoil Stamp - Hintergrund - SternchenA beautiful Hotfoil Stamp that conjures up a shimmering starry sky on your paper. The Hotfoil Stamp has a size of about 10.7 x 14.9 cm. With these "punches" you do not receive a punched part. These Hotfoil Stamps are designed to foil the pattern onto the paper piece using a hot foiling machine and Heat Activated Foil. These Hotfoil Stamps are of a high quality, so it is better to when the Hotfoil Stamps warm up along with the machine. We have had the best experience with our Hotfoil Stamps with the following equipment combinations: BigShot and GoPress and Foil Spellbinders and Glimmer Depending on the wear and tear of the equipment, we recommend that you add some cardstock or gray cardboard to the sandwich. Check out the examples for some initial inspiration from our design team. On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and let yourself be inspired. Material: 100 % steel Published on: 01 August 2022
Other crafters also bought
Seal head - Mini Herz - SiegelliebeWelcome to the world of sealing love ♥Our range of seals, sealing wax and accessories allows you toadd a touch of magic and elegance to your cards, packaging and layouts.A cute little heart, perfect for cards and layoutsfor weddings. The seal measures approx. 1.5 x 1.5 cm.To use our seal heads, you will need a one-off Wooden handle.The seal heads can be screwed onto this.We have collected lots of ideas for the seal love on our Pinterest pinboard and in our creative collection . Take a look and let yourself be inspired.Published on: May 03, 2024
Die - Designline - Frischesiegel - HerzBeautiful freshness seals with hearts for your home-made jams and preserved fruit. The punches in this set have the following sizes Fresh seal (approx. 6.5 x 13.3 cm) Topper (approx. 6.0 x 4.8 cm)The idea for this punch is from Annika Flebbe from Flebbe Art. The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and get inspired. Published on: 06 September 2024
Kraft punch - heart - large: Strong punch-outs with love ❤️ This extra strong heart punch is perfect for punching out grey cardboard - stable, precise and ideal for all your creative projects! Whether for scrapbooking, gift tags or DIY decorations, you can create beautiful, long-lasting accents with this punch. ✅ Ideal for: ✔ Scrapbooking & card making ✔ Gift tags & decorations Decorations ✔ Creative projects with sturdy grey card ✨ Special features: ✔ Specially designed for sturdy materials such as grey card ✔ Clean, powerful punching ✔ Perfect for long-lasting craft projectsThe punch measures approx. 7.0x 7.7 cm. ⚠ Important tip! Pay attention to the set-up of your punching machine to achieve the best results. We recommend our matching magnetic plate for an even better hold and precise punching! 💪✨ You can find inspiration on Pinterest and in the creative collection. Take a look and let yourself be inspired.Published on: 27. March 2025
💌 Love that comes from the heart Whether for birthday cards, thank you cards or just for fun - this heartfelt stamp set will add a lot of warmth and personality to your projects in no time at all. 🖤 Four hanging hearts of different sizes, lovingly drawn and decorated with small details such as bows and mini hearts, make this set a real favourite for creative people! ✂️🧡 ✨ Product details: 🖤 4 individual heart motifs - perfect for collages & layouts 🎀 With bows and little hearts - for that special touch 📏 Ideal for cards, tags, scrapbooking, journaling & more 🖨️ Fine lines for clean stamp impressions 🛠️ Can be combined with sayings, backgrounds or embellishments 💡 Creative ideas: 💌 Love messages & Valentine's Day cards 🎁 Gift tags with a heart 📓 Journaling pages & notebook decoration 🌸 Spring-like or romantic craft projects A delicate stamp set with lots of hearts - perfect for anyone who designs with love. 💕 The individual stamps have the following sizeslarge heart pendant (approx. 9.9 cm x 5.9 cm)medium heart pendant (approx. 7.5 cm x 4.5 cm)small heart pendant (approx. 4.2 cm x 2.5 cm)Heart (approx. 1.2 x 1.3 cm)The illustrations for this set are by Steffi from StilfeinDesign_kreativ and Stephie aka Papierschorsch. ✅ Product details: - Photopolymer stamp set on P6 sheet - Precise lines & clear imprint quality - Versatile use for cards, packaging, planners & more - Ideal for combining with other sets from our collection For particularly beautiful results, we recommend using the VersaFine Clair ink pads. So that you can get started right away, please remember: You will need a matching acrylic block for use - this is not included. 💡 Looking for inspiration? Take a look at our [Pinterest board] - you'll find lots of great examples and ideas for this stamp set. 💕 📅 Published on: 17 October 2025