Die - Plissee Baumschmuck 2
€29.95
Available, delivery time: 5 days
Product information "Die - Plissee Baumschmuck 2"
The Die - Pleated tree decoration 2 brings movement and elegance to your Christmas decorations 🎅.
The punch cuts a long strip with fine fold lines ✂️, which can then be easily formed into a folded pleated pendant - sometimes classic, sometimes modern, sometimes glittering ✨, depending on your choice of paper.
Whether as a tree decoration on the Christmas tree 🎄, as a hanging decoration in the window 🪟, as a highlight on gift wrapping 🎁 or as part of a festive table decoration - the pleated jewellery provides a special eye-catcher everywhere.
In combination with the first version of the pleated tree ornaments or other Christmas punches, complete decoration series in the same style can be created in no time at all. 💫
Design highlights:
✨ Punches a long strip with pre-set fold lines
🎄 Ideal for folding pleated tree decorations & hanging ornaments
🎁 Perfect for tree decorations, gifts & decorations
💎 Works great with design paper, kraft paper & metallic cardboard
💖 Perfect for:
🎄 Tree decorations & hangers for branches and wreaths
🪟 Window & wall decorations
🎁 Gift wrapping & bottle tags
📜 Creative table decorations & winter DIY projects
The punch measures approx. 30.0 x 9.9 cm
The punch is made from 100% steel and fits all standard punching and embossing machines in Combination with long punching plates (e.g. Big Shot, Cuttlebug & Co).
You can use it in a variety of ways - it is suitable for:
✔ ️ card
✔ ️ felt
✔ ️ fabric
✔ ️ shrink film
💡 Tip:
For particularly fine motifs, we recommend using an additional intermediate layer or a punching aid.
📌 Looking for inspiration?
We have collected lots of great ideas for using this punch on Pinterest and in our creative collection - why not take a look and get inspired!
📅 Published on: 28. November 2025
| Designer: | Silke Rieper |
|---|
Other crafters also bought
"Die - Mini Anhänger - Zahlen: With these dies, you can create designs on letters, cards, or boxes. You will receive a set of 10 (ultra) small pendant dies, intended for embellishing your cards. This allows you to cut out small decorations from color-matching paper for your crafts. The pre-cut hole allows our 0.3mm thread to be easily threaded, and with a steady hand, the 0.5mm thread can also fit through. Mini Pendant 1: Approximately 0.55cm wide and 1.47cm high Mini Pendant 2: Approximately 0.85cm wide and 1.48cm high Mini Pendant 3: Approximately 0.89cm wide and 1.52cm high Mini Pendant 4: Approximately 0.91cm wide and 1.46cm high Mini Pendant 5: Approximately 0.85cm wide and 1.50cm high Mini Pendant 6: Approximately 0.89cm wide and 1.50cm high Mini Pendant 7: Approximately 0.89cm wide and 1.50cm high Mini Pendant 8: Approximately 0.87cm wide and 1.50cm high Mini Pendant 9: Approximately 0.89cm wide and 1.48cm high Mini Pendant 0: Approximately 0.88cm wide and 1.51cm high The die works with standard die-cutting and embossing machines (DieCut systems). You can use it with cardboard, felt, fabric, and shrink film. You can find inspiration on Pinterest and in our creative collection. To achieve better punching results, separate the dies before use. You will find a link to a guide on how to do this one paragraph below. Attention: This die is a set of 10 individual dies connected by fine metal bridges. These bridges can be easily separated with a side cutter to obtain the individual die shapes. Marion has also written a small guide on how to separate the bridges most effectively. Material: 100% steel Made in the USA If you like the 'Mini Pendants - Numbers' dies, take a look at our small medallions as well. You can find them HERE. Published on: March 13, 2020."
Die Label - Marmeladen Glas ist ein Stanzen 3er Set. Die große Banner Stanze ist 7,0 cm lang und 3,8 cm hoch. Die mittlere Banner Stanze groß ist 4,7 cm hoch und 2,6 cm breit Die kleine Banner Stanze ist 3,1 cm hoch und 1,7 cm breit In Kürze finden sich hier auch Beispiele von unserem Designteam. In unserer Kreativsammlung und auf Pinterest haben wir viele tolle Ideen zu dieser Stanze gesammelt. Schaut doch mal vorbei und lasst Euch inspirieren. Für ein besseres Stanzergebnis die Stanzen von dem Gebrauch trennen. Den Link zu einer Anleitung dazu findet Ihr einen Absatz weiter unten. Achtung: Diese Stanze ist ein Set aus 3 einzelnen Stanzen, die mit feinen Metallstegen verbunden sind. Diese können mit einem Seitenschneider einfach getrennt werden, um die einzelnen Stanzformen zu erhalten. HIER hat Marion auch eine kleine Anleitung geschrieben, wie man die Stege am besten trennt. Seid vorsichtig beim Trennen der Stege, die hüpfen auch gern mal durch die Gegend. Die Stanze funktioniert mit den gängigen Stanz-und Prägemaschine (DieCut Systemen). Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100% Stahl Made in USA Veröffentlicht am: 10. März 2021
Die - Designline - Steffi's BlätterBeautiful different leaves, which are perfect for many occasions.Simple and elegant on cards for weddingsor birthdays or colorful on layouts with pictures from your last vacation. The die-cuts have the following sizessheet (approx. 3.9 x 7.1 cm)sheet (approx. 4.3 x 6.4 cm)sheet (approx. 4.0 x 6.7 cm)sheet (approx. 2.5 x 4.2 cm)sheet (approx. 3.4 x 5.1 cm)sheet (approx. 3.0 x 5.6 cm) The idea for this punch set comes from the lovely The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel On Pinterest and in our creative collection we have collected lots of great ideas for this punch. Take a look and let yourself be inspired. Published on: 31. May 2024