Die - Decorate it - Türklappkarte mit Kranz

Die - Wichtel negativ Ein zauberhafter kleiner Wichtel als Negativstanze macht sich perfekt auf Geschenkanhängern oder auf der Weihnachtspost. Er sieht einfach zum knuddeln aus. Die Stanze hat eine Größe von ca. 4,3 x 6,6 cm. Mit dieser Stanze bekommt Ihr KEIN ausgestanztes Stanzteil! Die Stanze funktioniert mit den gängigen Stanz- und Prägemaschinen (DieCut Systemen).Verwenden könnt Ihr sie für Karton, Filz, Stoff, Schrumpffolie. Material: 100 % Stahl Auf Pinterest und in unserer Kreativsammlung haben wir viele tolle Ideen zu dieser Stanze gesammelt.Schaut doch mal vorbei und lasst Euch inspirieren. Veröffentlicht am: 07. Oktober 2022

The "Stempelset - Designline - Karten - Adventskalender - Hintergrund Sterne" photopolymer stamp set consists of 1 stamp on an A6 sheet. A beautiful background stamp with many stars and a shooting star to fulfil wishes.The stamp measures approx. 8.5 x 13.0 cm.The illustrations for this set were drawn for us by Carola from Carolas Bastelstübchen. You will need acrylic blocks to use the stamps, which are not included in this offer. We have collected lots of ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and let yourself be inspired. Published on: 01 August 2024

Die - Weihnachtsbox - Tanne A magical goodie box for your Christmas or Advent table. The fir tree gives a cosywintry look.The individual punches in this set have the following sizes Box with fir tree (approx. 7.4 x 27.1 cm) Side panel (approx. 6.4 x 7.2 cm) The finished box has a base size of approx. 6.6 x 6.4 cm.The punch works with standard punching and embossing machines in combination with long punching plates (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 20. November 2024

The "Designline - Carolas Weihnachtsmelodien I - Stille Nacht" photopolymer stamp set consists of 2 stamps on a large A6 sheet. During the cozy and peaceful holiday season, Christmas songs play in the background, and we softly hum along. Who doesn't know that? Dear Carola has designed stamps based on well-known Christmas songs. In a starry sky, the lyrics of the song "Silent Night" are written in a very fine and delicate font. The second stamp features a snowman in the background and the lyrics "Frosty the Snowman" in the foreground. The stamps have the following sizes: Stille Nacht, heilige Nacht: ca. 8,5 x 6,1 cmFrosty the Snowman: ca. 4,9 x 8,5 cm Carola from Carolas Bastelstübchen has illustrated the artwork for this set. To use the stamps, you will need acrylic blocks, which are not included in this offer. We have compiled many ideas for this stamp set on our Pinterest board and in our creative collection. Take a look and be inspired. In addition to the "Designline - Carolas Weihnachtsmelodien I - Stille Nacht" stamp set, we also have other sets designed by artists. You can find them under the category "Designline". Published on: November 12, 2021.

The "Designline - Karten - Adventskalender - Tannenrahmen" photopolymer stamp set consists of 1 stamp on an A6 sheet.A delicate, beautiful frame made from fir branches for your festivecards or layouts. The stamp measures approx. 9.4 x 13.8 cm. The illustrations for this set were drawn for us by Carola from Carolas Bastelstübchen. The best results are achieved with VersaFine Clair ink pads. To use the stamps, you will need acrylic blocks, which are not included in this offer. We have collected lots of ideas for this stamp set on our Pinterest board and in our creative collection . Take a look and let yourself be inspired. Published on: 18. October 2024

Die - Layer Anhänger - WinterfreudeA great 5-piece punch set for layering. If you layer all 5 punched parts on top of each otheryou get a beautiful winter landscapewith a starry sky, fir trees and a deer.The punches have a size of approx. 8,0 x 8,9 cm.The punch works with all standard die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelWe have collected lots of great ideas for this punch on Pinterest and in our creative collection. Have a look and get inspired.Published on: 17 November 2023

Die - Designline - Kleine SternenboxAn enchanting box that is NOT closed.On the upper edge on each sidea big star on each side. The box makesvery well as a decoration on afestive table.The punch has a size of approx. 20.5 x 12.8 cm. The finished box has a size of approx. 5.0 x 5.0 x 8.0 cm (height incl. star).The idea for this punch comes from Sandra Möller from Papier und Passion.The punch works with all standard die cutting and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink film. Material: 100 % steelWe have collected lots of great ideas for this punch on Pinterest and in our creative collection. Have a look and get inspired.Published on: 17 November 2023

⭐🎁 ‘Star Ornaments Box’ die – small gift packaging with a big impact With the ‘Star Ornaments Box’ die, you can create extraordinary gift packaging in the shape of a star ornament in no time at all. Whether as a thoughtful gift, an Advent calendar, a place card or a Christmas tree decoration – this box turns small gifts into something truly special. Thanks to the built-in hanger, the finished box can be hung decoratively on the Christmas tree, on presents or on an Advent calendar, becoming a festive eye-catcher in its own right. ✨ What makes this die-cut special : ⭐ Original gift box in the shape of a star pendant 🎀 With built-in hanger for decorating and gift-giving ✂️ Precise die-cut results for easy assembly 🎨 Plenty of space for stamping, decorating and personalising 🌿 Highlights : Perfect for little surprises and monetary gifts Ideal as Christmas tree decorations or Advent calendar tags Versatile for Christmas, winter and other festive occasions Combines beautifully with Christmas stamps, tags and decorative elements 💡 Perfect for : Small gift boxes 🎁 Advent calendars ⭐ Cash gifts 💌 Christmas tree decorations 🎄 Table decorations ✨ Small gifts 💝 👉 Tip : Decorate the star-shaped box with festive stamp designs, bows, tags or glitter paper. Adding numbers for an Advent calendar or a personal message also turns each box into a lovely, one-of-a-kind creation. A creative packaging idea with a special charm – festive, versatile and perfect for little surprises that come from the heart ⭐🎁🎄✨💛 The die measures approx. 24.9 x 14.0 cm.The finished box measures approx. 12.0 x 11.0 x 3.7 cm The die is made from 100% steel and fits all standard die-cutting and embossing machines when used with long cutting mats (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional spacer or a die-cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 1 August 2026

With the ‘3D Mini Tag Set’ die-cut set, you can create enchanting little tags in various shapes. The set includes a circle, a hexagon, a star and a heart, each of which is assembled from two matching pieces. Thanks to the slits, the elements slot together very easily, transforming into little three-dimensional tags.Thanks to the built-in eyelets, you can attach the finished pendants using fine thread, ribbon or cord. Whether on gifts, twigs, cards or small tokens – the mini pendants add a lovely touch and, depending on the paper and colour, can be designed for a wide variety of occasions.💡 Perfect for:, gift wrapping, gift tags, Christmas & Advent projects, birthdays, weddings & favours, cards & scrapbooking, garlands & twigs, and small table decorations 👉 Tip:: Die-cut the two parts of a tag from different types of paper and then slot them together. Combinations of cardstock, metallic or glitter paper look particularly lovely – turning every little tag into a special 3D eye-catcher. Four shapes, endless possibilities – small, three-dimensional and perfect for adding lovely touches to gifts and creative projects. The dies come in the following sizes: Circle with eyelet (approx. 1.1 x 1.4 cm)Circle (diameter approx. 1.1 cm)Hexagon with eyelet (approx. 1.0 x 1.4 cm)Hexagon (approx. 1.0 x 1.1 cm)Star with eyelet (approx. 1.1 x 1.3 cm)Star (approx. 1.1 x 1.1 cm)Heart with eyelet (approx. 1.3 x 1.4 cm)Heart (approx. 1.3 x 1.1 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things, : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional layer or a cutting guide. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 11 September 2026

Die - Designline - Adventshaus - Tanne With this punch you can cut out the matchingfir trees for the Advent houses.  The following design papers are suitable for thisCD-DP-813CD-DP-814CD-DP-815CD-DP-816The two Advent houses are included, 1st Advent house and 2nd Advent house. The die-cuts are approx. 7.5 x 12.5 cm in size The idea for this punch set is from the lovely Sonja Peters aka so.papersblue.  The punch works with all standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film.  Material: 100 % steel We have collected lots of great ideas for this punch at Pinterest and in our creative collection . Take a look and let yourself be inspired. Published on: 10. November 2023  

With the ‘Slotted Star – Large’ die, you can create a beautiful three-dimensional star in no time at all. The two parts of the star are die-cut and then slotted together through the designated slots – creating a decorative 3D star that’s perfect for the Christmas and winter season.Thanks to the integrated eyelet, you can easily hang up the finished star using ribbon, thread or cord. Whether on the Christmas tree, in the window, on a present or as part of a festive decoration – the large Steck-Stern is a versatile eye-catcher.👉 Tip:: Die-cut the two star pieces from sturdy cardstock, metallic paper or glitter card, then slot them together. The star looks particularly lovely if you create the two parts from different, coordinating papers. A star with a special effect – simply die-cut, slot together and use as a beautiful three-dimensional centrepiece. The individual dies are available in the following sizes: Star with eyelet (approx. 7.8 x 8.1 cm) Star without eyelet (approx. 7.8 x 7.4 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink wrap 💡 Tip : For particularly delicate designs, we recommend using an additional layer or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and get inspired! 📅 Published on: 4 September 2026

Christmas-themed window & tags for festive craft projectsWith the ‘Holly Window and Tags’ die, you can create beautiful Christmas accents for cards, gift wrapping and small gifts. The decorative holly window with leaves and berries is complemented by various small pendant motifs, offering you plenty of options for personalised Christmas projects. The heart, deer, crown, star and moon each feature a small eyelet, making them perfect for use as pendants. Whether attached individually to a gift ribbon, used as decoration on cards or combined with the delicate holly window – the motifs create a lovely and festive look.👉 Tip: Place coloured, glossy or transparent paper behind the holly window to create beautiful contrasts. You can die-cut the small tags from metallic, glittery or coloured cardstock and attach them to your gifts with fine thread or a cord. A versatile Christmas die-cutting set for festive details – a delicate holly window, enchanting tags and plenty of possibilities for lovingly crafted Christmas projects. The dies come in the following sizes: Holly window (approx. 4.7 x 5.0 cm) Heart tag (approx. 2.2 x 2.8 cm) Deer tag (approx. 2.2 x 2.8 cm)Crown tag (approx. 2.5 x 1.8 cm)Star tag (approx. 2.9 x 3.3 cm)Moon tag (approx. 2.3 x 2.9 cm) The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). It’s incredibly versatile – suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional layer of backing or a die-cutting aid. 📌 Looking for inspiration? We’ve gathered lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 4 September 2026

Die - Lochverstärker - Oval 🧵🎨🏷️💡✨ Small details with a big effect! These oval hole enhancers are the perfect addition to your basic pendants - standard with slot and the matching add-ons. 🏷️ 3 different sizes for maximum flexibility 🎨 Add colourful accents to your pendants 🧵 Stabilises and decorates at the same time 💡 Ideal for layering and combining ✨ Adds the finishing touch to gifts & cards A small detail - with a big impact for your creative projects!The individual punches in this set have the following sizesHole booster (approx. 1.4 x 0.5 cm)Hole booster (approx. 1.6 x 0.8 cm)Hole booster (approx. 1.9 x 1.1 cm)Slit (approx. 1.0 x 0.2 cm)The punch works with standard punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric and shrink film. Material: 100 % steel We have collected lots of great ideas for this punch on Pinterest and in our creative collection. Take a look and let yourself be inspired. Published on: 25. July 2025

With the ‘Heart Box’ die, you can create a beautiful heart-shaped box for small gifts, sweets and thoughtful surprises. The unique heart shape makes the packaging a real eye-catcher in its own right and is perfect for any occasion where you want to give a gift from the heart.The individual die-cut pieces are perfectly coordinated, allowing you to create a sturdy box with a matching lid. Using different papers, stamps and decorations, you can redesign your heart-shaped box time and time again – from romantic and playful to simple and elegant.👉 Tip:: Make the lid and base from different papers and decorate the heart-shaped box with flowers, bows, small tags or a personalised message. Even in tone-on-tone colours, the special heart shape looks beautiful and particularly elegant. A particularly great idea from our design team: arrange four heart-shaped boxes to form a four-leaf clover and give the gift of a huge dose of happiness. Packaging that comes from the heart – lovingly made, versatile and perfect for small gifts for very special people. The individual die-cuts have the following dimensions: Base (approx. 16.5 x 15.3 cm) Lower edge (approx. 26.1 x 5.9 cm) Top (approx. 26.3 x 2.9 cm) Lid edge (approx. 16.5 x 15.3 cm) (Heart inside approx. 13.7 x 11.9 cm)The finished box measures approx. 16.5 x 15.3 x 5.9 cm. The die is made from 100% steel and fits all standard die-cutting and embossing machines (e.g. Big Shot, Cuttlebug & Co). You can use it in a variety of ways – it’s suitable for, amongst other things: : ✔️ Cardboard ✔️ Felt ✔️ Fabric ✔️ Shrink film 💡 Tip : For particularly delicate designs, we recommend using an additional spacer sheet or a die-cutting aid. 📌 Looking for inspiration? We’ve collected lots of lovely ideas for using this die on Pinterest and in our creative collection – do have a look and be inspired! 📅 Published on: 2 September 2026

Cut & Emboss Folder - Decorate it! - Tür - 11 x 15,5 cmWith this great Cut & Emboss Folder you can punch out a door with an embossed pattern   and all in one step. Please place the folder CROSS into the die-cutting and embossing machine and crankit through and it will be embossed and die-cut at the same time. The door can be beautifully designed with the die-cutters fromfrom the "Decorate it!" series Series. The door measures approx. 6.0 x 13.2 cmThe folder works with all standard die-cutting and embossing machines (DieCut systems).For more inspiration, visit our design team. Published on: 20. December 2023

The "Designer Paper – Garden Green – Double-sided" sheet measures 30.5 x 30.5 cm, has a paper weight of 200 g/m² and a matt finish. We use our high-quality designer paper for creating greeting cards, scrapbooking and box-making. We recommend this high-quality paper as it produces beautiful folded corners and edges after the folding process. We hope you enjoy this lovely paper. Please note:: Due to its size, the paper can only be sent as a parcel. The paper is non-returnable!You can find inspiration on Pinterest and in the creative collection. Do have a look and be inspired. Please bear in mind that colour variations from the original may occur, as the display can vary depending on your screen settings. Published on: 3 July 2026

Die - Designline - Haus Stülpbox - Deckel mit Ausschnitt - small With this punch you can create a lid with window for the House Slip Box - Small.The punches for the House Slip Box - Smallyou can find  HERE.The bundle with both sets you can find  HERE.The punch has the following sizeLid with window (approx. 8,3 x 10,6 cm)Size of the window (approx. 4,1 x 6,5 cm)   The idea for these punches come from dear Stephanie Kasper aka Papierschorsch. The punch works with the common punching and embossing machines (DieCut systems). You can use it for cardboard, felt, fabric, shrink wrap.  Material: 100 % steel On Pinterest and in our creative collection we have collected many great ideas for this punch. Take a look and get inspired. Published on: 01 August 2023